Repair to 100HP motor and 225A auto starter installed at LIS Seen Thakran.

Repair to 100HP three phase induction motor of Unit no. III at LIS Seen Thakran by way of decoupling the damaged motor from pump after disconnecting all the electrical connections. Dismantling of the motor at site by way of unscrewing of nuts/bolts and then extraction of rotor from the stator, extracting out old damaged/burnt copper winding from the stator, cleaning the slots of stator with appropriate chemical cleanser. Complete rewinding of the stator with providing/winding and fitting of new copper wires of requisite gauge and specifications at site. Providing and fitting of new F class insulation, packing material. Varnishing the stator winding with superior quality varnish and drying the stator winding completely. Reassembling the motor with the help of nuts/bolts/screws after inserting rotor inside the stator of the motor and checking the continuity of each phase. Refitting/installation of 100 HP motor of Unit no. III on the base frame and coupling it with pump. Repair to 225 Ampere auto starter cum fault analyzer cum protection control panel of Unit No. III installed at LIS Seen Thakran by way of disconnection of all the incoming and outgoing power cables, extraction of damaged solid state fault analyzer cum controller and replacing the same with new such unit conforming to the required specifications. Removing of moisture from the panel by using hot air blower. The job further includes overhauling of the star-delta auto starter by way of providing and fitting of spare contactor kit of 3 pole power contactor MNX225-01 No. and MNX140-01 no. of reputed make, digital amperemeter-01 No., digital voltmeter-01 No. and current transformer-03 Nos to replace the old damaged parts. Testing of the motor and starter on no load and then on full load for its smooth operation after making all the electrical connections. Complete job involves cost of material, skilled and unskilled labour charges, transportation charges, headload charges, hire charges of tools and tackles required for the job inclusive of all taxes as applicable and rebate on old parts. Complete Job.