WBPHE/AE/HESD/NIeT10OF202425

Supply, delivery of following materials at site- PART-A M.S fabricated cubical type wall mounted motor control center with hinge type front door cover mode of 2 mm thick CRCA Sheet and suitable locking arrangement having fully automatic logic control system based on PLC with manual and fully auto bypass mode as per specifications and details laid in the NIT. N.B. Single line diagram, bill of materials and internal circuit diagram should be submitted before delivery of panel.

Three Phase Voltage Stabilizer capacity of 20KVA oil cooling type having unbalance 200- 500V input voltage, and 400V(±1%) output voltage, Auto/manual servo voltage stabilizer with U/V, O/V, O/L protection with contactor at output side, input MCB, Ammeter Bell etc. as per I.E rules and as per specification.

4.0 sq.mm 3.5 core 1.1 KV grade water proof flat submersible cable

25.0 sq.mm. 3.5 core, 1.1KV grade Aluminium armoured power cable

In sheet enclosure 100A 400V 50Hz TPN Main Switch rewireable & side handle type along with suitable fuse link.

In sheet enclosure 100A 400V 50Hz 4 pole 4 way industrial Aluminium Busbar Chamber.

In sheet enclosure 100A 400V 50Hz 4 pole on load side handle type change over switch.

100A 400V 50Hz porcelain fuse grip(3 set) & 1 no. neutral link connector with required size pasted wooden board for mounted on wall

GI fabricated outdoor canopy type cable jointing box inside fitted 6nos. 100Amp rated busbar and hinge type front door and painted powder coated anticorrosive paint as per IP55 sa per direction

Making termination of existing 25sq.mm 3.5 core cable by crimping method with supplying cable socket, cable gland etc. as per direction of EIC.

Supply Delivery at site 2nos. Plastic chair and 1no. Plastic table as per direction.

Laying of 4sq.mm 3 core X 2 submersible cable of SI No.- 1.3 in underground trenches of 460mmX760mm and covering brick (8nos. Bricks per meter run as per I.E rules ) from pump house to Tubewell including socketing the cable end and interconnection all complete as per direction.

Laying of Submersible cable on wall /floor in the pump house through suitable size PVC pipe including supplying materials and inter connection in the panel outgoing all complete as per direction.

Making double Earthing arrangement in compliance with I.E. Rules by G.I. pipe electrode with G.I. funnel (50mm X 3 mtr. Long) direct in ground with supplying and fixing of GI. earth busbar, drawing of 25mm x 6mm G.I. earth conductorbetween pits and as earth busbar inside the pump house and 20mm x 3mm GI strips for continuty to different electrical installation i.e. main switch, panel and feeder box etc. and making suitable size earth pit etc. all complete

Making internal and external lighting system for the pump house by the following items 6000Lumen LED External light model BRP409 LED115 CW SLC FG PSU GR V2 or similar type along with 1.0mtr long GI arm wall bracket or equivalent - 2 nos Bulkhead model WT202W LED6S NW PSU S2 PC or similar type-2 no. Tubelight Model TMC501 P 2 X TLED 22W - 2 nos ceiling fan - 1 no 20-25A MCB protected DBOXx Plug socket with plastic enclosure MCB Double door DB for the above system with QVE DB 12 way including 1 no 32A FP incomer and 6 nos 6-32A SP MCB The cost includes fitting fixing complete wiring including switch board as per direction and specification.

PART-B Installation and testing & commissioning of above Supplyed items in Serial no-1.1 to 1.9 in all respect as per direction the cost includes supply and use of all required jointing and fixing materials and mending good for damage if any including testing commissioning of complete installation.

DEY ENTERPRISE (BID ID -5778678)

PRANAB KUMAR DAS (BID ID -5776864)