REPAIR/RESURFACING OF ROAD, ROAD FURNITURE AND ROAD MARKING AT CENTRAL AREA UNDER AGE B/R-I IN GE (CENTRAL) KIRKEE

Amount

Repair to pot holes any depth, n.exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by M&L for applying tack coat with bituminous paving bitumen RS-1 @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 size and again well rammed (incl supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and directed by Engr-in-Charge.

Scarifying or picking up gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth exc 50mm and n.exc 100mm complete all as specified and as directed.

M&L for 7.5 cm thick (compacted thickness) WBM, with Granite, trap or basalt stone coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) spread and rolled and consolidated to gradient and camber required including rolling by using mechanical power road roller of 8 to 12 tonne capacity complete all as specified and dircted

All as per Item No 3 above but except materials (material to be used obtained from scarifying)

M &L Preparing unsurfaced WBM surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 10 kg per 10 Sqm with sprayer over existing surface etc complete all as specified and directed. Make : HINCOL or equivalent

M & L Premix bituminous macadam with 4% binder content using paving bitumen) by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less). Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site.

M&L for applying evenly a priming/tack coat bituminous emulsion RS-1 @ 5 kg per 10 Sqm with sprayer over bituminous macadam etc. all as specified and directed by Engr-in-charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site.

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n.exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) and as approved by GE

Aadarsh Construction

Sunshine Ventures

R K Enterprises

Shri Sant Cosntruction