Kanseilo-Jadapada-Guptamanika Dhandakumbha Road

Flank dressing to proper camber etc complete as per the direction of the Engineer-in-Charge.

Scrapping cleaning road surface applying tack coat using 3.00 kg of Bitumen for 10 sqm and laying 37.5 mm thick BUSG in one layerusing 0.45 cum of 25 mm to 40 mm size Granite metal and 12.00 kg Bitumenof penetration Grade for 10 sqm with 0.12 cum of 12 mm size chips as key stone for 10 sqm spreading over and laying including heating pouring and spreading over and preading bitumen metal chips and rolling with PRR including hire and running charges of PRR and all other machineries including cost and conveyance of all materials etc complete as per direction of Engineer-in-charge.

Cleaning the existing black topped surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and/or compressed air to receive bitumenous etc complete as per dierection of Engineer-in-Charge.

Providing and applying tack coat with bitumen emulsion using emulsion distributor @ 0.20kg/sqm on the prepared surface cleaned with mechanical brooms as per clause 503 of MOSRT & H Specifications for Road & Bridge works [Output-3500 sqm]

Providing and laying S.D.B.C of 25mm thick on prepared surface and laying with paver finisher to the required level rolling with paver finisher etc complete as per the direction of Engineer-in-Charge.

Construction of embankment with approved materials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per Clause 305 of MoRT&H Specifications dfor Road & Bridge works(4th Revision) complet including cost,conveyance,Royalities,Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge.