Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹353.5 CrAccepted-AOC P AND C TOWERS 2ND FLOOR 140 PERUNDURAI ROAD ERODE 638 011 | ERODE | TAMIL NADU | 638011 | ₹353.5 Cr Quoted ₹353.7 Cr | L1 | Accepted-AOC The lowest and negotiated tenderer |
| 2 | L2₹364.5 CrRejected-AOC | ₹364.5 Cr | L2 | Rejected-AOC High rate tenderer |
| 3 | Rejected-Technical | - | - | Rejected-Technical Disqualifed in the PQ evulation |
| 4 | Rejected-Technical | - | - | Rejected-Technical Disqualifed in the PQ evulation |
| 5 | Rejected-Technical SAKTHI MAHAL NO 63 PERUNDURAI ROAD ERODE 638 011 | ERODE | TAMIL NADU | 638011 | - | - | Rejected-Technical Disqualifed in the PQ evulation |
Tender Value
Refer Docs
EMD Value
₹1.8 Cr
Closing Date
28 Apr 2025, 6:00 pmClosed
Superintending Engineer/CC
No.132, E.V.R.Salai, Kilpauk, Chennai-10
Construction of 896 Nos. of PC/HC Quarters at Mansion Site (Thousand light) in Chennai city under CM Announcement scheme
2025_TNPHC_540465_1
SE/CC/DB/3244/2021
Open Tender
Civil Works
330 days
Mansion site in Chennai city
Construction of 896 Nos. of PC/HC Quarters at Mansion Site (Thousand light) in Chennai city under CM Announcement scheme
9 documents required · 9 mandatory
₹0
₹1.8 Cr
29 May 2025
7 Apr 2025
30 Apr 2025
7 Apr 2025
28 Apr 2025
7 Apr 2025
Amount
1.1) Earth work excavation for foundation in all soils and sub soils to the required depth (including refilling) a) 0 to 2m depth
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt
b. 2 to 3 mt.
c. 3 to 4 mt.
d. 4 to 5 mt.
1.6) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 m
7.2) Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make
13.1) Filling with Excavated Earth
15.4) Providing Cuddappah slab of 20mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works I. 20mm thick a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i.In Eighth floor
j.In Ninth floor
k. In Tenth floor
l. In Eleventh floor
m. In Twelth floor
n. In Thirteenth floor
o.In fourteenth floor
p. In fifteenth floor
q. In sixteenth floor
15.5) Providing Cuddappah slab of 40mm thick, finishing with two sides for cupboard, ward-robes, shelves, kitchen platform slabs, sink and other similar works II. 40mm thick a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
e. In Fourth floor
f. In Fifth Floor
g. In Sixth Floor
h. In Seventh Floor
i. In Eighth floor
j. In Ninth floor
k. In Tenth floor
l. In Eleventh floor
m. In Twelth floor
n. In Thirteenth floor
o.In fourteenth floor
p. In fifteenth floor
q.In sixteenth floor
16.1.1) Precast cement concrete Jally ventilator using standardised concrete mix M30 (without vibrating charges) a. In Ground Floor
21.2) Supplying and fixing of Teak Wood wrought and put up a) Teak wood over 2.00 metre and below 3 metre length
b. T.W. below 2 m length.
23.3) Supply and fixing of best approved superior variety magnetic door catches suitable for doors
25) M.S.Holdfast
30) Finishing the top of flooring with cement concrete 1:3 (No sand) 20 mm thick Ellispattern Flooring
31) Weathering course
37.1) White washing three coats using clean shell lime slaked
39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate
40) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint
41) Painting the new Iron work with two coats of approved first class synthetic enamel ready mixed paint
46) Supply and fixing 20 mm dia Alu. Hanger Rod
47) Supply and fixing Alu Towel rail 75 cm long
48) Supplying and fixing of aluminium plate with five pins for coat stand
49) Supply and fixing chromium plated 8 guage Picture Hook
50.3) Supply and planting avenue trees
50.4) Supplying and fixing of triangular shape chicken mesh tree guard
52.1) Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls
53.3) Supplying and fixing of C.I. steps of approved quality and brand (not less than 5kg each)
54) Supplying and fixing of brass chromium plated screw down tap 15mm dia heavy not less than 430 grams weight with ISI mark
Electrical arrangements 72) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook
74) Charges for assembling and fixing of ceiling fan
76) Supplying and laying of 8 SWG GI wire on wall below ground levels
78) Earthing Station IS3043 (Type I)
86) Anti termite treatment
Annexure 1.9.3.1) Bored cast- in -situ piles installation of vertical cast in Situ Bored piles of following dia using Standardised concrete mix M30 Grade) b.600mm dia pile
1.9.4) Chipping of RCC pile head to the required cut of level and clearing way debries with an average lead of 1 km entirely with city limits M30 Grade b.600 mm dia pile
1.9.5) Mobilization charges inclusive of transportation to site
1.9.6) Conducting Routine vertical compression load test for bored cast in situ RCC piles of following dia
1.14.2) Prviding Augering 30 cm dia for compound wall (Standardized concrete grade M30)
2.1.1) Supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness
2.15) Supply and filling in foundation and basement with Stone dust in layers of 150mm thickness
2.18) Supply and filling the low laying area with Quarry Rubbish in layers of 150mm thickness
3.1.3) Plain cement concrete 1:5:10 for foundation using 40 mm gauge broken stone jelly
3.2.3) Plain cement concrete 1:2:4 for Foundation & Basement and other similar works
SEWER LINE 3.8.3) Plain cement concrete 1:3:6 using 20mm gauge hard broken stone jelly
6.2.2) Brick work in C.M. 1:5 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a) In foundation and basement
8.2.3.1) Providing and laying in position, Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement
b. In Ground Floor
c. In First Floor
d. In Second Floor
e. In Third floor
f. In Fourth Floor
g. In Fifth Floor
h. In Sixth Floor
i. In Seventh Floor
j.in Eighth floor
k.in Ninth floor
l.in Tenth floor
m. In Eleventh floor
n. In Twelth floor
o. In Thirteenth floor
p.In fourteenth floor
q.In fifteenth floor
r.In sixteenth floor
s.In Seventeenth floor
t. In Eighteenth floor
9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor
b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
g. In Fifth Floor
h. In Sixth Floor
i. In Seventh Floor
j.in Eighth floor
k.in Ninth floor
l.in Tenth floor
m. In eleventh floor
n. In Twelth floor
o.In Thirteenth floor
p.In fourteenth floor
Q.In Fifteenth floor
R.In sixteenth floor
S. In seventeenth floor
T. In Eighteenth floor
11.2.2) Brick partition wall in Cement Mortar 1:4 75mm thick for super structure by using Chamber burnt bricks of size 9”x4½”x3” (23x11.4x7.5cm) b. In First Floor
c. In Second Floor
d. In Third Floor
e. In Fourth Floor
g. In Fifth Floor
h. In Sixth Floor
i. In Seventh Floor
j. In Eighth floor
k.in Ninth floor
l.in Tenth floor
m.In Eleventh floor
n. In Twelth floor
o. In Thirteenth floor
p.In fourteenth floor
Q. In Fifteenth floor
R. In sixteenth floor
12.1.1) Brick partition walls 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) in cement mortar 1:4 b. In Ground Floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
g. In Fifth floor
h. In sixth floor
i. In seventh floor
j. In eighth floor
k. In Ninth floor
l. In Tenth floor
m. In Eleventh floor
n. In Twelth floor
o. In thirteenth floor
p. In fourteenth floor
q. In Fifteenth floor
R. In sixteenth floor
S. In Seventeenth floor
18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab, staircase, portico slab and other similar works
c.For Square and rectangular columns and small quantities
d. Vertical wall
f. Curved Surface
21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame
21.7.3) Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 900 mm x 2100mm (single Leaf)
b) Door size 750 mm x 2100mm (single Leaf)
22.1.8) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in positiona. a) Single leaf suitable for door size 1000mm x 2100mm
22.3.3) Providing T.W.double leaf shutters with 9mm thick BWR Ply wood for cupboard/ward robes shutters
26.1) Flooring with a bed of CC 1:5:10
28.1) Floor plastering in C.M. 1:4, 20 mm thick
29.8.1) Supplying and fixing of Colour Glazed tiles using Grout (Tile Joint Filler) C.M 1:2, 10mm thick
29.9.1) Supplying and fixing of colour ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).
32.1.1) Finishing top of roof with one course of pressed tiles 23 x 23 x 2cm over a bed of C.M (1:3), 12mm thick mixed with water proof compound at 2% by weight of cement etc.
33.2.1) Plastering in C.M. 1:5, 12 mm thick.
34.2.1) Plastering in C.M. 1:4, 12 mm thick
35.2.1) Special Ceiling plastering in C.M. 1:3,10 mm thick
36.1) Cement mortar Border in C.M. 1:5, 12 mm thick a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
43.2.1) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels binding wire insulated with PVC
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)
b) Augering 30cm dia
44.5.3) Providing Rain water Harvesting well ring of circular shape of 1m dia, 60cm depth ( 30cm depth 2 Nos), 50mm thickness using Standardised concrete mix M30
44.6.1) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe with (UPVC special clamp )
50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm
50.5.1) Supplying, Fabricating and erection of M.S Scheme Name board
52.2.1) Supplying, laying, fixing and jointing the following UPVC pipes of schedule 40 a) 32mm PVC pipe with necessary PVC/UPVC specials
b) 25mm PVC pipe with necessary PVC/UPVC specials
c) 20mm PVC pipe with necessary PVC/UPVC specials
52.4.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe
52.8.4) Supply and fixinng of MS bore well clamp set of size 80mm best aprooved quality
53.3.2) Supply and fixing of CI steps of approved quality and brand (not less than 5kg each)
53.4.1) Supplying and fixing of Mild steel Manhole cover of size 600mm x 600mm using chequered design plate 2.50mm thick
53.5.1) Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories
54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap
54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap
56.3.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.
56.4.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.
57.1.1) Supplying and fixing EWC superior variety (white) 500mm
58.3) Supplying and fixing the following dia PVC (SWR) pipe including all required PVC specials etc., all complete., a) 110mm dia PVC SWR pipe
b. 75 mm dia PVC SWR pipe
58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
59.2.1) Supplying and fixing 150mm x 100mm size stone ware Gully trap using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm)
60.1) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)
61.3) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 160 mm UPVC Non Pressure pipe
b. 250mm UPVC Non pressure pipe
c. 315 mm UPVC non pressure pipe
64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
64.3.2) Wiring for lift well light point and socket outlet with 2 x 1.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V
65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (PVC Electrical Box )
66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )
67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (PVC Electrical Box )
69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)
70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark
70.5.3) Supply and fixing of 2' 10 W batten LED fitting complete with all accessories on wall / ceiling with PVC unsheathed copper leads from terminal to the fitting for mirror light purposes.
75.2) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep
77.7) Run off main with 2 wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
81.1) Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work
Lightning arrester 82.2) Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required (MR)
82.3) Supply, installation, testing & commissioning of 100mm dia cast iron earth electrode with flange of 2.4 metre long buried in ground, including filling with Bentonite powder and RCC manual cover. MR
82.4) Supply and fixing of MS cable box of suitable size on wall for the entry of 4 x 10 sqm /3.5c x 25 sqm with cable gland suitable for the above size with earth connection.
82.5) Supply and fixing of twin arm suitable for 100 W BC lamp / 6 W LED lamp type aviation lamp fitting with lamps on suitable 20 mm GI pipe on the parapet wall of the terrace of the building
82.6) Supply, Installation, Testing and Commissioning of 3 KVA invertor with 30 Min battery back-up, Single Phase incoming & single Phase outgoing along with SMF batteries for emergency lighting with battery rack.
83.1) Supply and fixing of LED Street lighting luminaries suitable for fixing 25W LED Street Light Fitting with LED (light emitting diode) lower end
83.2) Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend
84.3.1) Run off main with 2 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
85.4) Supply and run of 50 mm dia GI pipe on wall ( B class ) for the draw of earth bus ( 25 mm x 3 mm ) copper flat from the earth pit.
85.5) Supplying and laying of 100mm dia GI pipe including labour charges and earth work, refilling for road crossing a) Below GL
93.1.1) Plastering with CM 1:3, 12 mm thick mixed with water proofing compound
96.5.1) Precast concrete block Masonry using Autoclaved Cellular Aerated Concrete block of size 600 x 200 x 100mm with CM 1:4 for Partition wall b. In Ground Floor/stilt floor
c. In First Floor
d. In Second Floor
e. In Third Floor
f. In Fourth Floor
g. In Fifth Floor
h. In Sixth Floor
i. In Seventh Floor
j. In Eighth floor
k. In Ninth floor
l. In Tenth floor
m.In eleventh floor
n. In Twelth floor
o.In Thirteenth floor
p.In fourteenth floor
R. In Fifteenth floor
S. In Sixteenth floor
96.7) Supplying and laying of Rubber Moulded Hydraulic pressed paver block 83mm thickness
108.5) Run of 4 wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS :694:1990
112.1) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI Quality
125.3.1) Supplying and delivery of "Godraj Nav-tal Ultra XL+" lock & Key of approved quality
STREET LIGHT 149.3.1) Supply and erection of hot dip galvanized 7.0 mtrs. Free standing Double Arm bracket 8 sided octagonally
149.3.3) supply and fixing of 40 mm dia GI pipe fixed to the octagonal street light pole
151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 core x 185 sqmm aluminium cable
b) 3.5 c x 25 sq mm PVC LTUG aluminium armoured cable
c) 4 c x 16 sq mmPVC LTUG aluminium armoured cable
d) 4 c x 10 Sq mm PVC LTUG aluminium armoured cable
151.3.2) Supply and fixing the following Aluminium Crimping Lugs suitable for the UG cable etc to complete. a) 3.5 Core 25 Sqmm Cable crimping lugs
b) 2 Core 10 Sqmm Cable crimping lugs
155.1) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) ( length 10Ft x height 6Ft x width 1.5Ft)
155.2) Supply and erection of 200 Amps capacity floor mounting panel board (Cubical type) (Length: 5Ft x Height 4 Ft x width 1.5Ft)
155.3) Supply and erection of 250 Amps capacity floor mounting type metering panel board (Cubical type) (Length 4ft x Height 3ft x width 1.5ft)
155.3.1) Supply and erection of 63 Amps capacity floor mounting panel board (Cubical type) with bus bar
161.1.4 )Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 x 185 sqmm PVC armoured LTUG cable
b) 3.5 Core 25 Sqmm PVC armoured LTUG cable
c) 2 Core 10 Sqmm PVC armoured LTUG cable
d) 4 x 10 sqmm PVC armoured LTUG cable
e) 4 c x 16 sq mm aluminium PVC armoured LTUG cable
161.4) Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable a) 3 1/2 x 185 sqmm PVC LTUG aluminium armoured cable
b) 3.5 c x 25 sq mm PVC LTUG aluminium armoured cable
c) 2 x 10 sqmm aluminium cable
d) 4 x 10 sqmm aluminium cable
e) 4 c x 16 sq mm PVC LTUG aluminium armoured cable
162.2.1) Supplying and clamping of PVC armoured LTUG cable (Above GL) a) 3.5 Core 25 Sqmm
b) 2 Core 10 Sqmm
c) 4 x 10sqmm
171.1.8) Supply and Delivery of Openwell Pumpset with ISI mark IS 8034 without Panel Board of capacity 900 LPM X 60 M of electric motor pump set with accessories
171.2.3) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset with ISI mark For following HP a) 6 HP
171.2.8) Supply and delivery of clear water vertical wet type submersible pumpset without panel boardsuitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against 75 LPM x 175m
175.1.1) Supply and fixing of triple pole and neutral 6 way 7 segment 3 tier compartmental type MCB distribution board
176.1.2) Supply and fixing of SMC fuse box ( IP 65 rating) containing 1 No. 32 A 4 way terminal block, 1 No. 10 A,10 KA TPN MCB with suitable clamps
179) Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.1 mtr. Class 'B' GI pipe of dia not less than 40mm
179.1) Supply and run of following tinned coated copper flat on surface or in recess for connections a) 25mm x 3mm copper strip
b) 25mm x 6mm copper strip
180) Supply and run of 2 of No.8 copper wire for earth connections
180.1) Supply and run of 2 of No.8 tin coated copper from the earthing to the control panel, DG set alternator body earthing
207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls
207.4.1) Providing two coats of Exterior Emulsion paint including primer for outer walls
213) Supply and delivery at site and fixing of SFRC manhole cover with frame a) 0.60 x 0.60m
238) Applying one coat of Anticorrosive treatment for steel reinforcements.
238.1) Applying one coat of Anticorrosive treatment for window grills
251.5) Supply and fixing of 80 mm dia UPVC Pipes of best approved quality, with ISI mark Below GL
254.2) Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length (3m height + 0.50m projection + 0.50m into the ground ) For 3m Ht
255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb
b) 12watts LED bulb
255.6.1) Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED with guard
281.2.1 ) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark c) 65 mm dia GI union
344.2) Supply and fixing of Bevelled edge mirror 500 x 400 x 5.5mm
359.3.1) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3, 20mm thick
362.2.2) Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3
366.3.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick
379.4.4) Supplying and fixing of Jet Black Granite Tiles (superfine polished with machine cut edges) of size 2'-0"x 1'-0" of 10 mm thick for Kitchen arrangements b. In First floor
c. In Second floor
d. In Third floor
e.In fourth floor
f. In Fifth Floor
g. In Sixth Floor
h In Seventh Floor
i In Eighth floor
j.In Ninth floor
k. In Tenth floor
l.In Eleventh floor
m. In Twelth floor
n. In Thirteenth floor
o.In fourteenth floor
p. In fifteenth floor
q. In sixteenth floor
379.6.1) Suppy and laying of granite tile of 10mm thick ( wall cladding ) in CM 1:2 10mm thick incl. cost of materials , labours etc.,all including ( Rupy Red) in all etc complete
Column Guard 379.9.2) Supply and fixing of rubber round column guard of size 550mm height x 75mm (two corners each 75mm ) x 10 mm thick on the existing R.C.C Columns corner surface in stilt area with reflective stickers,
379.9.3) Supply and fixing of Rubber (Heavy Duty) speed Breakers of size 500mm x 425mm x 75 mm and existing concrete roads of required capacity and quality
379.9.4) Supplying and fixing of Convex Mirror 60cm dia with plastic cover and fixing in position using 50mm dia "B"class GI pipe at a height of 1.50m painted with Enamel painted framed on bottom with couch screws
382) Supply, delivery and fixing of cuddappah slab sink of size 600mm x 600mm x 200mm thick 32mm dia ‘B’ class G.I. waste water pipe
383.1) Providing single round nosing to the edges of Granite slab of 10 mm thick
384) Supplying and fixing of PVC low level flushing tank (White - 10 litre capacity) with all internal fittings (wall mounting type)
451.3.2) Supplying and fixing of best approved quality of following CP and PVC water supply/Sanitary fittings a) CP two Way bib cock with health faucet
b) 15mm dia CP Shower Arm with Overhead Shower Rose
c) 20mm CP concealed stop cock
d) Supplying and fixing of PVC Trims / Corners beading suitable colour in toilet wall cladding in all floors
503.1) Supply and laying of required dia of Nylon rope
504.4) Supply and fixing of following dia UPVC Pipes of best approved quality, with ISI mark Above GL a) 50mm dia UPVC Pipes (above GL)
b) 65mm dia UPVC Pipes (above GL)
516.1) Coil earth to street light poles with No.8 SWG GI wire of 11.5 mtrs of length
CABLE TRAY 528.1.2) Supplying and fixing of perforated G.I.sheet (GI should be hot dip galvanized) following size of cable tray a) Size of the tray is 150mm x 50mm and 2mm thick.
b) Size of the tray is 50mm x 50mm and 2mm thick.
532.3) Providing the ceiling with two coat of wallputty of 3mm thick over the exposed RCC Surface
608.1) Supply and fixing of following dia UPVC column Pipes of best approved quality, with ISI mark Below GL a) 50mm dia
b) 40 mm dia UPVC pipe (Metro water line)
609.6) Supply and delivery of following OD of PVC casing pipes (6kglcm2) as per IS 12818 a) 200 OD of PVC casing pipes
b) 150mm OD of PVC casing pipes
609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2) as per IS 12818 /2010
609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole a.150mm dia PVC Casing pipe
b.200mm dia PVC casing pipe
615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth a) Above 5.00 HP to 10.00 HP
b) Above10 HP to 20.00 HP
619.5) Supplying and fixing of following dia GM Wheel Valve (Heavy duty) b) 65mm GM Wheel valve with Brass
619.9) Supply, erection, testing and commissioning of Cast iron body and Gun metal a) 80 mm G.M Non return valve
b) 40mm Non return valve for Borewell & Metro water
707.2.1) Supply and laying of PVC insulated and sheathed following core and sq.mm flat type copper cable confirming to IS 694/1990,cable for submersible motor a) 3 core 4 sq.mm flat type copper cable
b) 3 core 6 sqmm PVC
707.3) Labour charge for laying of following core and sqmm PVC insulated and sheathed flat type copper cable a) 3 core 4 sqmm PVC
b) 3 core 6 sqmm PVC
741.2) Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess a. 40 A TPN 10 kA MCB
b. 10/20/32A DP MCB
c. 63A TPN MCB
742.1) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)
799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m
b) Drilling of borewell in 60m to 90m
c) Drilling of borewell in 90m to 120m
d) Drilling of borewell in 120m to 150m
799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s a) up to 60m depth ending from ground level.
b) Drilling of borewell in 60m to 90m depth ending below ground level
c) Drilling of borewell in 90m to 120m depth ending below ground level
d) Drilling of borewell in 120m to 150m depth ending below ground level
799.3) Charges for developing the borewell for the entire depth with air compressor of 300 CFM capacity [Minimum 8 hours]
799.3.1) Supply and fixing of PVC 160mm dia top end cap of approved make 6.1mm thick with inner thread
832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes
832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes
FIRE FIGHTING MOTOR DRIVEN MAIN PUMP 929.3) Supply, erection, testing and commissioning of electric motor driven pump suitable for automatic operation rated for 2280 LPM at head of 88 M
DIESEL ENGINE DRIVEN PUMP 929.4) Supply, erection, testing and commissioning of main diesel engine driven pump of horizantal centrifugal type suitable for automatic operation rated for 2280 LPM at 88m head,
JOCKEY PUMP 929.5) Supply, erection, testing and commissioning of mono block jockey pump rated for 180 LPM at 90 M head.
BOOSTERPUMP 929.6) Supply installation testing and commissioning of 900 LPM Pump at terrace level approved and instructed by the engineer in charge operating voltage is 415 V 3 phase 50 Hz. up to 15 HP
MOTOR CONTROL CENTRE 929.7) Supply, errection testing and commissioning of MV panel board made out of 16 SWG thick CRCA sheet
Booster pump panel 929.8) Supply, errection testing and commissioning of MV panel board made out of 16 SWG thick CRCA sheet
CABLES 929.9) supply ,laying and clamping of 1No. XLPE sheathed armoured/ unarmoured heavy duty power cable a. 3C x 50 sqmm aluminium cable ( Main Pump Connection)
b.3C x 10 sqmm aluminium cable (Jockey Pump Connection)
c.12C x 2.5 sqmm Copper cable (Diesel Pump)
d 2C x 1.5 sqmm Copper cable (Pressure Switch connection )
e 3 C x 10 sqmm aluminium Booster pump Connection pump room to terrace
930) Supply and drawing bare copper conductors of the following sizes along with wiring / cables and giving connections as required for pumps, panels etc. a. 25 x 3mm GI strips
b. 8 SWG GI Wire
EXHAUST PIPE 930.1) Exhuast pipe for Diesel engine of 100 mm dia with mineral wool insulation, accoustic suppression with aluminium sheet.
ABOVE GROUND PIPING 930.2) Supply ,laying testing and commissioning of MS "B"class pipe (Heavy) / Medium following pipes with all specials like Tee, Elbow, reducer etca. a) 250mm dia MS "B"class pipe
b) 200mm dia MS "B"class pipe
c) 150mm dia MS "B"class pipe
930.3) Supplying, laying, fitting and fixing , testing and commissioning of folllowing dia MS"B"class pipe (Heavy) / Medium pipe line confirming to IS 1239 (Below GL ) a. 150mm dia MS "B"class pipe
b. 100mm dia MS "B"class pipe
c. 80mm dia MS "B"class pipe
d.50mm dia MS "B"class pipe
e. 25mm dia MS "B"class pipe
BUTTERFLY VALVE 930.4) Supply, installation, testing and commissioning of Butterfly valves, lever operated cast iron body flanges drilled to IS 1538 PN 1.6 grade complete , as per IS 780 etc complete with following sizes. a. 200 mm dia BUTTERFLY VALVE
b. 150 mm dia BUTTERFLY VALVE
C. 100 mm dia BUTTERFLY VALVE
d. 80 mm dia BUTTERFLY VALVE
e. 50 mm dia BUTTERFLY VALVE
BALL VALVE 930.5) Providing and fixing Ball valve of following sizes PN 20 with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete: in all respects. a. 25 mm BALL VALVE
b. 15mm BALL VALVE
NON RETURN VALVE 930.6) Supply installation ,testing & commissioning of non return valve of following sizes a. 200mm dia NON RETURN VALVE
b. 100mm dia NON RETURN VALVE
c. 80mm dia NON RETURN VALVE
d. 50mm dia NON RETURN VALVE
AIR Release valve 930.7) Supply ,installation ,testing & Commissioning of 19mm dia metre air release valve made of gun metal complete and made functional
AIR VESSEL TANK 930.8) Supply ,installation ,testing & Commissioning of air vessel made of mild steel of 200mm dia
MS STRUCTURAL WORKS 930.9) Providing and fixing M.S structural work fabricated from standard sections
PRESSURE SWITCH 940) Supply, installation, testing pressure switch bellow type for the automatic operation
PRESSURE GAUGE 940.1) Supply, installation, testing and commissioning of pressure gauge oil type 4 inch dial as approved
Foot Valve 940.2) Supply installation , testing & commissioning of Non Return valve of following sizes a. 250mm Dia Foot Valve
b. 80mm Dia Foot Valve
PRIMING TANK 940.3) Supply, installation, testing & commissioning of PVC 2 Layer black of capacity 1000 Lit with required accessories.
HYDRANT VALVE 940.4) Supply installation, testing and commissioning of Single/Double Headed Hydrant valve
FIRE BRIGADE 940.5) Supplying, installation of Gun-metal 4-way fire brigade inlet connection of 4 nos. 63mm dia a) 2- Way Inlet fire brigade
b.4way Inlet fire brigade
HOSE CABINET 940.7) Supplying, installation of hose cabinet to accommodate two pieces of hose reel of 15 M length along a. Hose cabinet of External type (Double Door & to accomodate Two hose and the Branch Pipe)
b. Hose cabinet of External type ( Single Door & to accomodate One hose and the Branch Pipe)
940.8) Supply ,installation, testing and commissioning of Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long
FIRE HOSE REEL 940.9) Supply ,installation, testing and commissioning of Fire Hose Reel (as per ISI) wall mounted,
941) Supply and erection of Cast iron Butterfly Valve with single action lever for open shut operation a) 80mm dia Butterfly valve
BRANCH PIPE 950) Supply ,installation ,testing and commissioning of short branch pipe with 63mm dia female
950.1) Supply installation testing & commissioning of 19mm dia nominal bore quartzoid bulb type sprinkler
DRY CHEMICAL POWDER TYPE 950.2) Supply and fixing of dry chemical powder type (ABC Type) of 6 Kg capacity,
950.2.1) Supply and fixing Co2 type (2Kg) fire extinguisher new seamless cylinder
950.3)Supply, Erection, Testing and Commissioning of 120 Watts Amplifier w/Power supply unit battery charger 16 Zone switcher control and Microphone with required rack.
950.4) Supply, Erection, Testing and Commissioning of 6 Watt Box Speaker units.
CABLES 950.5) Supply and laying of 2c X 1sq.mm FRLS flexible Cable with 25mm PVC conduit pipe
ZONE PANEL 950.6) Supply, installation testing and commissioning of conventional type C & I panel having capacity to connect zone panel
HOOTERS 950.7) Supply, installation, testing and commissioning of 12W, electronic hooters (sounders) with accessories for sounding the alarm when activated.
MANUAL CALL POINT 950.8) Supply, installation testing and commissioning of Manual Call points of break glass type with hammer and chain.
950.9) Supply, installation testing and commissioning of Conventional smoke detector suitably mounted on ceiling with MS Junction Box/ False ceiling
CABLES 951)Supply and surface laying of 2c X 1.5sq.mm shielded FRLS armoured cable including cost of materials and labour charegs in all etc
952) Granular Sub-base with Graded Material (Table:- 400-1) - Plant Mix Method (Construction of granular sub-base - for Grading V Material as per MORT&H Rev. V specifications No.111,112,401,900.
953) Wet Mix Macadam (Table 400-13) (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification MORTH Rev. V Specification
958.4) Lift arrangements Design, Supply, Delivery, Installation, Testing and Commissioning of Passenger Lift machine room less, 13 Persons / 884 Kgs / P - Passengers Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD
958.5) Design, Supply, Delivery, Installation, Testing and Commissioning of Goods/Service lift ( 24 Person capacity/ 1500kg/ 1632kg) MRL, Speed 1 m/s with Stainless Steel Panels, microprocessor based controller, VVVF drive, Fire rated doors and ARD
959) Annual Maintance Charges for the lift suppplied and installed for the period of four years after the free warranty period of one year For first one year (Free Service) i) For Second one year @ 5% for capital cost
ii) For Third one year @ 5% for capital cost
iii) For Fourth one year @ 5% for capital cost
iv) For Fifth one year @ 5% for capital cost
959.2) Supply, installation, testing and commissioning of 160 KVA Diesel Generator set complete with all accessories
959.3) Accessories for 160 KVA Diesel Generator set. a)Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator.
b) Supply and Insulation for the residential silencer (supply of residential silencer is included under item for DG Sets)
c) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer
d) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density.
e) Supply and clamping of 4 core 2.5 sq. mm PVC sheathed and armoured copper cable from alternator to the proposed DG panel on wall / in the hume pipe with necessary glands and crimping at both ends.
f) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.
g) Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set
959.4) Electrical arrangements a) Supply and fixing of vertical type 4 way triple pole and neutral MCB sheet steel enclosure (Higher End) with bus and neutral link and earth link
b) Supply and fixing of manually operated phase changer board with 3 Nos. 63 A ( L & T / Selzier make ) 63 A switch in single suitable MS enclouser ( 3 way ) with RYB indication lamps including all interconnections and earth connection
c) Providing and fixing G.I. tape 25 mm x 6 mm thick on porcelian insulators on parapet or surface of wall for lightning conductor (For horizontal run)
d) Providing and fixing G.I. tape 25 mm x 6 mm thick on porcelian insulators on parapet or surface of wall for lightning conductor (For vertical run)
960) Preparation of necessary electrical drawings for approval by CEIG, submission of drawings for approval, arrangement for the inspection of the Electrical Inspectorate officials and obtaining Safety Certificate for availing supply from TANGEDCO and commissioning the installations.
LETTERING & NUMBERING 960.4.1) Supplying and fixing of Aluminium TNPHC Emblem of 30" height with approved coloured powder coat in finishing matt
960.4.2) Supplying and fixing of Aluminium TNPHC Emblem of 12" height with approved coloured powder coat in finishing matt
960.4.3) Supplying and fixing of 6" height Aluminium letters with approved coloured powder coat in finishing matt
960.4.4) Supplying and fixing of 5" dia plastic foam plate of 3mm thick with 3"height number with approved colours
960.4.5) supply and fixing of 24"x 8" size plastic foam name plate with vinyl cutting letter with approved colours
960.4.6) Supplying and fixing of 8" dia plastic foam plate of 3mm thick with 3"height number with approved colours
960.4.7) supply and fixing of 20"x 5" size plastic foam name plate with vinyl cutting letter with approved colours
980) Supply,Installation,Testing and Commissioning of Ongrid Roof top solar power plant with Renewsys/Waaree/Vikram solar panels 10.70 KWP and with INVT/JFI/equivalent inverters - 1 nos as per MNRE standards Installation charges includes formwork ,
V SATHYAMOORTHY CO (BID ID -1309243)
Bidder Name
P and C Projects Private Limited
V SATHYAMOORTHY CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
BOQ.xls
BOQ • 0.55 MB
Tenderdocument.pdf
Tender Documents • 19.14 MB
Tenderdocument_2.pdf
Tender Documents • 2.50 MB
Download all tender documents and submit your bid