Special repair to roof treatment, plastering, plumbing, sanitary fitting, joinery in bldg No. 24 and Provn of Sewage line and Provn of certain sanctioned works under GE NORTH MAMUN

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified.

Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats, including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) all as specified and directed.

Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face all as specified and directed by Engr-in-charge, including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F anodised aliminium frame for doors, windows, ventilators (including grills) with one or more rebates including joining cleats for fixing etc, complete all as specified and directed.

S&F anodised aliminium doors 100mm x 40 mm x 3.15 mm side & top rail 150 mm x 40 mmx3.15 mm middle & bottom rails of side hung type without sash bars, aluminium sections including necessary joining cleats glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting such as 150mm long (1 Nos), hinges type B-21 100mm long (3 Nos), 2 Nos tower bolt 150mm long, suitable aluminium handles 200mm long (2 Nos), aluminium door stoper, complete all as specified & directed.

S&F mortice lock verticle type size 100mm 4 levers, complete all as specified and directed.

M&L for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and fixed, complete all as specified and directed.

M&L Preparation of old steel sufaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, orstainless steel wire staples, complete all as specified & directed.

3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane, complete all as specified and directed.

3mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed.

S&F 300mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200mm of extruded section and fixed, complete all as specified and directed.

S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked, complete all as specified and directed.

S&F 2nd class Small fitting such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours; articles n exc 200cu.cm each, complete all as specified and directed.

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190gm), complete all as specified and directed.

S&F in repair 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod,etc complete all as specified and approved by GE.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 05mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement, complete all as specified and directed.

M&L Rendering 15mm thick cement plaster (two layers 5mm thick finishing layer over 10mm thick base layer) on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement with WPC complete all as specified and directed. (Note WPC shall be measured and paid seperately)

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / Chajjas, roof projections, drainage etc, and making the line in true shape and finishing the surface without using extra cement mixed with water proofing compound, complete all as specified and directed. (WPC shall me measured and paid seperately)

GI wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc. including all laps, cutting & waste, complete all as specified and directed.

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coats of cement base paint including curing, complete all as specified & directed.

Preparing new /Old wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic, antifungal emulsion exterior weather proof paint on external surfaces, complete all as specified and directed.

M&L two coats of distemper oil emulsion over primer coat after application of average 2mm thick wall care putty including preparation of new pastered wall surfaces, complete all as specified and directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface, complete all as specified and directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface, complete all as specified and directed.

M&L two coats of distemper oil emulsion over over primer coat after application of average 2mm thick wall care putty including removal of existing treatment of old wall surfaces, complete all as specified and directed

M&L two coats of white wash on surface of wall including preparation of old plastered surface, complete all as specified and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed.

Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coats of cement base paint over a coat of alkali-resistant priming paint all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position all as directed.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.

M&L for 75mm thk PCC 1:4:8 type D-2 as in subbase to flooring, complete all as specified and directed.

M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating), complete all as specified and directed.

M & L for cement concrete (1:2:4) type " B-1 " (using 20mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60cm in height, water troughs and the like rounded or chamfered on edges including necessary form work.

M&L sand filling in floors or paving incl leveling watering and consolidation, complete all as specified and directed.

M&L 25mm thick Plain cement concrete 1:2:4 type B-1, using (20mm graded aggregate) in subbase, subfloors, base floors etc, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster and tiles on walls etc, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement including screed bed or bedding layers of mortars 15mm thick in CM 1:4, complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises, complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over 15mm thick cement mortar screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd and directed.

M&L Marble work 12mm to 15mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair cases etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra, complete all as specified and directed.

Round chamfering, to the edges of marble/granite slabs, complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc, complete all as specified and directed.

Refixing of old steel tubing 15mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc, complete all as specified and directed.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10cm in girth, complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc, complete all as specified and directed.

Refixing of old steel tubing 20mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc, complete all as specified and directed.

S & F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs, complete all as specified and directed.

S & F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Bib taps for 15mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs, complete all as specified and directed.

S & F in repairs Vitreous china wash basin, white flat back,size 550x400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand and 32mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread, complete all as specified and directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure screwed for iron pipe ISI marked fixed in repairs, complete all as specified and directed.

S&F in repair towel rail CP 600mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union, complete all as specified and directed.

S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass sheof 12cm wide with chromium plated brackets guard & railing 60cm long, complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms), complete all as specified and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x430mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, complete all as specified and as directed.

S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F in repairs vitreous china urinal, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal aginst wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP spreader, brackets, flush pipe grating, union with discharge pipe, etc, complete all as specified and directe.

S & F in repars PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing tank of any description and any capacit,y complete all as specified and directed.

S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore, complete all as specified and directed.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints, complete all as specified and directed.

S&F in repair 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured).

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints, complete all as specified and directed.

S&F in repair 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints, complete all as specified and directed.

S&F in repair 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in repair CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe, complete all as specified and directed.

S&F in repair cast iron cowl for 50mm dia, complete all as specified and directed.

S&F in repair cast iron Swan necks (or offsets) upto 152mm projection for 100 mm to 50mm pipe, complete all as specified and directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement, complete all as specified and directed.

20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement, complete all as specified and directed.

APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

S&F factory made RCC manhole cover with frame (for manhole iner opening 60cm), complete all as specified and directed.

M&L 200mm reinforced cement concrete pipes class NP-2 with one collar per length of pipe, complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms).

M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C-2 for 150 to 200mm dia pipe, complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc in any type of soil and getting out, complete all as specified and directed.

Returning filling in (soil) incl spreading, levelling, watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

Removing of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in lintel beams, roof beams, slab supported on walls, beams, chajja etc etc including necessary form work, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Precast Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:4 as in slab for water tank/shelf, landings, cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with plain faces, complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L 150mm reinforced cement concrete pipes class NP-2 with one collar per length of pipe, complete all as specified and directed.

Cutting into existing manholes for connecting new drains for ineternal dia of pipe 150mm dia and above, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in channel, drains and mass concrete, foundation, fillings etc, complete all as specified and directed.

Septic Tank 150 user User:- Excavation in hard/dense soil foundation in PCC 1:2:4, Fly ash brick Masonry in CM 1:4, RCC slab covers including RCC precast manholes cover (MD) vent shaft and sludge chambers etc complete following the drg No CEPZ/C-TD/013/13.

M& L Soakage well excavation in ordianry soil, foundation in PCC 1:3:6, well of honey combed and solid in M-25 concrete, incl intercepting chamber screen chamber, fly ash brick work in CM 1:4, RCC cover slab in M-25, filled with brick bats, complete size 3.00m dia and 4.5m deep etc complete following the drg No CEPZ/C-TD/013/13.

Brick work with old servicable bricks retrieved from dismantling straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4, complete all as speecified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels, drains, manholes, coping, etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, manhole covers and similar articles setting and jointing with CM 1:1 all as specified.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to wall with cement joints, complete all as specified and directed.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out soft and loose soil, returning, filling in and ramming each or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fasts, fixed with PCC 1:2:4 type B-1 as required and making good surface with CM 1:3 and applying external finish to match with existing surface while superficial area exc 400 sqcm but not exceeding 0.10 sqm, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified.

S&F steel work in tubular trusses included special shaper washer etc complete using ERW or induction butt welded tubes conforning to IS 11261-1998 grade St-240, incuding two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

S&F for mild steel bars (TMT) 6 to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S & F Stainless steel toilet paper holder, complete all as specified and directed.

S&F 35mm thick HDF prelaminated (wenga/Teak colour) moulded shutter 35mm thick puf (poly ucrane foam) inslusation with minimum density 40kg/cum filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet complete in all respect with lock rail & beautyfied by PVC bedding all around with PVC solvent complete all as specified and directed.

S&F 35mm thick single piece factory made wire gauge door shutter (incl fixed galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and Aluminium X-PM to support wire mesh) made out of 5mm wood grain colour PVC sheet on both side of frame made out of MS tube 19swg size 19x19mm complete in all respect with lock rail and beautyfied by PVC bedding all around with PVC solvent, complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for Granite work 18-20mm thick (table rubbed and polished) for fixing of WHB including cutting, drilling, wall lining (veneering to wall), complete all as specified and directed.

S&F stop valves/Angle cock bore dia 15mm, cast cupper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm bore bib taps, cast copper alloy cromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F 15mm bore pilllar taps, cast copper alloy with capstan heads, chromium plated srewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron fipe and fixed.

S&F fancy type viterous china counter top wash hand basin oval shaped of size 160x560x410 complete all as specified and directed.

Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe incl plastec seat and cover, CI trap (As directed) with stainless steel or aluminised hinging device, complete all as specified and directed.

S&F health foucet hand shower 8mm dia 1m long flexible hook and wall hook, complete all as specified and directed.

S & F PVC flushing cistern 10 ltrs capacity calve less symphonic action type low level complete with in let valve handles incl brackets, chromium plate brass flush pipe 32mm dia PVC connection and incl taking down old high level cistern complete all as spdecified.

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F 500 ltrs rotational moulded polythylene water storage tank three layers with threaded type tank cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PTMT float valve with polythene float and fly nut complete screwed for iron pipe or brass ferrule.

S & F CP brass towel rail 600mm long 20mm dia with brackets.

S&F 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F cast iron cowl for 50mm dia all as directed by Engr-in-charge.

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured).

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured).

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed.

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door.

M&L cast iron floor trap (outlet dia 75mm) with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

S&F Soap dish, viterous china white approximate size 160x160x90mm fixed to plug with chromium plated brass screws.

S & F TMT bars 6mm to 8mm dia and cut to length bent to shape required, incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in sttirups, spacer and binders.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) all as specified and directed.

Taking down carefully unsv copper/aluminium point wiring (light/ fan/ Bell/ socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M & L for point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit having thickness not less than 1.8 mm (ISI marked) with all accessories including sheet steel /CI terminal box of adequate size having thickness not less than 2 mm including 3mm thick hylem/masonite sheet including 1.5 sqmm FRLS PVC insulated unsheathed copper conductor multistranded cable earth conductor connected to common earth dolly, complete all as specified as directed for the One light point controlled by one switch 5 Amp, SP, one way 240 volts. Note:- Proper colour coding is to be followed as per IS Specification.

One Ceiling/Exhaust fan point controlled by one switch SP, one way, 5 Amp, 240 Volts.

One multi pin (5 pin) socket 5 Amp on same board.

One multi pin (5 pin) socket 5 Amp independent.

Ditto, all as per item No 149 herein before but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size FRLS PVC insulated and unsheathed copper conductor cable as earth conductor (green colour) for one 6 pin socket outlet 15Amp multi purpose independent point controlled by 15 Amp switch SP, one way, 240 Volts, complete all as specified and directed.

S&F in replacement switch piano flush button single, pole one way, 5 Amp (ISI marked) complete all as specified and directed.

S & F in replacement Socket 2 in 1, 5 pin 5 A (ISI marked) complete all as specified and directed.

S&F in replacement socket outlet 2-in-1, 6 pin, 15/5 Amp flush type (ISI marked) complete all as specified and directed.

S&F in replacement switch piano flush button single pole one way 15 amp (ISI marked) complete all as specified and directed.

S&F in replacement ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed.

S & F in replacement step type electronic fan regulator flush type complete all as specified and directed.

S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED lamp 12 watts 230 volts retfrofit suitable for any type lamp holder as required.

S & F SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC, incl taking down old, complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 6 to 16 Amp, incl taking down old, all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 32 Amp, incl taking down old, all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA of rating 63 Amp, incl taking down old, all as specified and directed.

S & F in replacement High efficiency LED linear tube 1X18 watt, 6500 K, 230 volts wall mounted with LED batten(Channel) complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.

S&F 1100 volt grade XLPE heavy duty cable, 16 sqmm 2 core, wire armoured with aluminium stranded conductor PVC insulated laid in trenches including taking down existing cable etc, incl taking down old, complete all as specified and directed . Note all the cable entries should be through proper metallic cable gland.

M&L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable complete all as specified and directed.

S&F in replacement of galvanised tubes 40mm bore light grade with all fittings laid in trenches icnluding all fiitings all as specified and directed.

M&L for well burned bricks , laid flat ( old size) sub class B designation 75 for cable protection complete all as specifed and directed.

S & F in replacement LED light 1x35watt made out of pressure die-cast aluminium wit polycarbonate cover IP66 protection including 32mm bore GI pipe bracted mounted using clamps, nuts bolts, washers, fastners etc. Complete all as specifed and directed .Make : LR02-391-XXX-57-XX of Wipro or equivalent make- Havells, philips, Bajaj Note : All LED fittings will be approved from NABL Lab certificate and the certificate for 5 year warranty of product from auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F in replacement of earthing complete with G.l earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below GL) with top edge of the plate not less than 1.5m below the normal ground level connected galvanized earth lead wire 4.0mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessary excavation & earth work in any type of soil, removing surplus soil to a distance not exc 50 M, including PCC chamber in PCC (1 : 2 : 4), type B1, using (20 mm graded stone aggregate), mild steel frame made out of angle iron of size 40 mm x 40 mm x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6 mm thick Cl cover with handle , watering arrangement with funnel internally secured with wire mesh with 20 mm dia light grade GI pipe for watering, 15 mm dia medium grade, Gl pipe for earth wire protection with and including alternate layer of charcoal dust and common salt. complete all as shown in electrical plate No 3 connected to DBs all as specified and indicated including testing on completion.

S&F switch piano flush button single, pole one way, 5 Amp (ISI marked), complete all as specified and directed.

S & F Socket 2 in 1, 3 pin 5 A (ISI marked), flush type, complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI(Marked) all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S & F Supply and fixing switch socket combination 2 in 1, 3 pin 5 Amp & 15 Amp universal, complete all as specified and directed.

S&F High efficiency LED linear tube 1X18 watt, 6500 K, 230 volts wall mounted with LED batten (channel) complete with all accesssories internely pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size.

S & F SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC, complete all as specified and directed.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 6 to 32 Amp, all as specified and directed.

S&F MCB SPN 240V, 50Hz, 10 KA, of rating 32 Amp, all as specified and directed.

S&F LED Endura rugby light fitting 1x10W bulk head luminaries, with lamp holders etc, complete with all accessories, internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 230V,50 HZ.

Sub main wiring with PVC insulated unsheathed 2X4 sqmm multistranded copper conductor cable 1100 V drawn through & including PVC concealed conduit with 1X4 sqmm PVC insulated green copper cable for continuous earth, PVC conduit not less than 25mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing surface sub main wiring etc complete all as specified and directed.

Supply, installation, commisioning and testing of heavy duty Exhaust Fan of metal body and blades single 220 volts 50Hz 1400/900 RPM 250mm sweep turbo Jet complete etc inclduing shutters cutting of suitable size hole and making good to surface with existing surface to wall providing mounting bolts, nuts, screws, fasteners, making of mounting base frame as per site requerment all as specified and directed.

M/s Rajeev Vashist

M/s. RAMESH KUMAR

dadwal engineers

kewal builders

naresh kumar sharma

M/S DUGGAL CONSTRUCTION CO

Raghbir chand

Walia trading co