CA NO GE/H-13/2020 21 NAME OF WORK REPAIR/MAINTENANCE OF SUNKEN PORTION OF TOILET SHAFT SANITARY FITTINGS TILLING INCLUDING E/M REPAIR WORK OF MAIN HOSPITAL BLDG AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT 10

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete unreinforced( in ground floors and paving at any position 15 cm thickness (below or above ground level)

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed.

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.laid over and including 15 mm tnick cement screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick,over and including 10 mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Light coloured vitrified tiles, 8 to 10 mm thick (square/rectangular) jointless , area of each tiles exceeding 0.36 sqm but n exc 0.42 Sqm, in floors etc laid over and including 15 mm thick cement screed in CM 1:6, set and jointed complete all as directed.

M&L for 18 to 20mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms and like in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in cm 1:6, complete all as specified and directed.

Taking down and refixing in same opening after repair shutters of any description exc 1.00 sqm and not exc 2.00 sqm, complete all as directed.

S & F 15 mm bore medium grade galvanised steel water tubing with all fittings in wall or floor fixed to wall or laid in floors including taking up or down old tubing GI 15 mm bore complete all as specified and directed.

All as per item No-09 here-in-above but bore of pipe 20 mm.

M&L cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs gun metal, globe or gate valve with iron wheel, screwed both ends for iron pipe suitable for 20 mm bore iron pipe all as directed.

S&F of in repairs vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm (for hospital use) including waste coupling, wall bracket, waste pipe of suitable size etc, complete all as specified and directed.

S&F in repairs white colour, vitreous china washdown water closet pan (pedestal pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litres including PVC white seat cover, complete all as specified and directed.

S&F in repair white colour, vitreous china squatting pan 'Orissa' patern, water closet of size 580x440 mm with integral foot rest P or S trap complete all as specified and directed.

S&F in repairs 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor.

S&F in repairs 15 mm dia chromium plated shower rose 125 mm size with CP arms for shower complete all as specified.

S&F in repairs 15mm dia PVC connection 45 cm long, complete all as directed.

S&F in repairs long body bib cock, 15 mm bore with wall flange made of cast copper alloy, chromium plated, complete all as directed.

S&F in repairs wash basin mixer, with out pop up waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified.

Supply and fixing in repair toilet paper holder chromium plated complete all as specified and as directed.

S&F in repairs angular stop cock/ angle valve 15 mm bore with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in repairs PVC angular stop cock/ angle valve 15 mm bore with wall flange complete all as specified.

S&F in repairs PVC bib cock, 15 mm bore with wall flange complete all as directed.

S&F in repairs PVC Piller cock 15 mm bore with wall flange complete all as directed.

S&F in repair chromium plated towel rail 600 mm long complete all as specified.

S&F in repairs 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as directed.

S&F in repairs bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in repairs two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in repairs handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in repairs PVC Jet with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in repairs PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as directed.

S&F in repairs brass chromium plated soap dish of Hindware, cat No F88011 or equivalent in Parryware,Cera.

S&F SS glossy finish grating of square shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with cement mortar to floor/nahani traps etc, complete all as directed.

M & L in repairs for Cast iron floor trap of 75 mm outlet plainincluding jointing to waste pipe in run lead fixed in cement mortar complete all as specified.

Supplying and laying of 40 mm dia High density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.complete all as specified.

Taking down CI pipes of any size or pattern including all fitting fixed to wall, floors, etc all as specified

S&F for 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified.

M&L for fixing only 100mm bore cast iron soil waste and vent pipes ( retrieved from Srl item No 37 above) in any length fixed with cement joints fixed to walls, complete all as specified.

S&F 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears fixed with cement joints laid in floors or in trenches complete all as specified.

S&F 75mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors complete all as specified.

S&F for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls, complete all as specified.

M&L for fixing only 75mm bore cast iron soil waste and vent pipes ( retrieved from Srl item No 37 above) in any length fixed with cement joints fixed to walls, complete all as specified.

S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches all as specified

S&F cast iron bends,Tee (any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed.

S & F in repair of 100mm dia stack clamps made out of 50mm wide and 3 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S & F in repair of 75mm dia stack clamps out of 50mm wide and 3 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces using integral water proofing compound (3% by weight) for floor and sides of wall in sunken floor (Note : Rate quoted by contractor is deemed to included the cost of water proofing compound).

M&L for applying 3 mm thick water seal 132 Make - Coral or equivalent in Dr FIXIT/FOSROC on plastered surfaces in sunken floor complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring with smooth surface finished all as specified

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 etc, including demolition of brick work built in cement mortar complete all as directed.

M & L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement , complete all as directed

Taking down cement plaster on brick/ surfaces built in cement mortor including raking out joints, hacking for key scrubbing down with water etc complete

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 1.5 mm thick and alkali primer complete all as specified and directed .

M&L for applying two coat of oil bound distemper on ceiling on old surfaces, inlcuding preparation of surfaces complete all as directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n exc 1.50 Sqm and removal from site.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each and removal from site.

S&F 100x44x1.5 mm size Powder coated aluminium section as in chowkhats/frame with rebate complete all as directed.

S&F 1.5 mm thick section powder coated aluminium glazed window shutter, styles & rail 44mm x 44mm including all fittings, such as aluminium handle of size 100mm ,two no aluminium hinges of size 75mm each ,two no aluminium anodized tower bolts of size 100mm, with each moving leaf all as specified.( Note : Glass pane shall be measured and paid seperately)

M&L 5.5 mm thick tinted glass including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified.

Supply fabricating and fixing of aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.5mm thick. Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixing plain/tinted sheet glass or ACP sheet with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm and two aluminium tower bolts of 250mm size and 02 nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Note: sheet glass Plain/frosted/ACP Sheet shall be measured and paid seprately under respective item of schedule)

S&F 3mm thick aluminium coated panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified.

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site

S&F Stainless Steel but hinges 100mm size

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 150mm

S&F Extruded aluminium anodised alloy handles, fabricated type 150mm size.

S&F in repairs 160mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified.

S&F in repair PVC (SWR) bend 160 mm dia fixed in position complete all specified.

M&L for taking down old unserviceable point wiring from existing surface/concealed conduit after disconnection of electric connection from main DBs (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original existing surface i.e. brick work, plastering, white colour washing complete all as directed by Engr-in Charge.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in & including PVC concealed conduit medium grade ISI marked of size 20 mm dia including cutting and chasing, and also including 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including MS sunken box of suitable size for acomodating light/fan/bell switches, sockets & regulators, and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. Note - All accessories likes modular top cover plate, Metal flush box, screws, as applicable will be included in quoted rates.

All as per srl item No. 72 here in before but point wiring for one socket outet point 5 amps on the same board.

All as per srl item No. 72 here in before but point wiring for one socket outet point 5 amps on the independent board.

All as per srl item no. 72 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for 15 Amp power point on Independent board.

Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including cutting and chasing,and also PVC conduit suitable dia as per SSR part-I with medium grade including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed including taking down. Note : 1. Three run of 4 Sqmm wire and 1mtr of PVC conduit will be measured as one unit.

Supply & fixing in replacement of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing in replacement of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing in replacement of Modular socket 6 Amp, 3 pin, 2 module size complete all as directed.

Supply and fixing in replacement of Modular socket 6/16 Amp, 3 pin, 2 module size complete all as directed.

Supply and fixing in replacement of Ceiling rose, PVC polycarbonate body isolated body, 3 terminal, 240 volts, 5 Amps complete all as directed.

Supply and fixing in replacement of MCB protected modular AC/Geyser box 3 module complete with and including 6 pin socket 25 amps, plug top, modular cover plate, mini MCB SP 25 Amp capacity and PVC gang box etc, complete all as directed.

Supply and fix in replacement of 1 to 2 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction all as specified and directed by Engineer-in-charge

Supply and fix in replacement of 3 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction all as specified and directed by Engineer-in-charge

Supply and fix in replacement of 4 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction all as specified and directed by Engineer-in-charge

Supply and fix in replacement of 6 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction all as specified and directed by Engineer-in-charge

Supply and fix in replacement of 8 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction all as specified and directed by Engineer-in-charge

Supply and fix in replacement of 12 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction all as specified and directed by Engineer-in-charge

Supply and fix in replacement of sleek and curve plate with elegant looks comes with sturdy support frame for solid strength of 1 to 2 module all as specified and directed by Engineer-in-charge

Supply and fix in replacement of sleek and curve plate with elegant looks comes with sturdy support frame for solid strength of 3 module all as specified and directed by Engineer-in-charge

Supply and fix in replacement of sleek and curve plate with elegant looks comes with sturdy support frame for solid strength of 4 module all as specified and directed by Engineer-in-charge

Supply and fix in replacement of sleek and curve plate with elegant looks comes with sturdy support frame for solid strength of 6 module all as specified and directed by Engineer-in-charge

Supply and fix in replacement of sleek and curve plate with elegant looks comes with sturdy support frame for solid strength of 8 module all as specified and directed by Engineer-in-charge

Supply and fix in replacement of sleek and curve plate with elegant looks comes with sturdy support frame for solid strength of 12 module all as specified and directed by Engineer-in-charge

Supply and fix in replacement of modular fan regulator 1 module 100 watt all as specified and directed by Engineer-in-Charge

Taking down metal flush box including switch, socket, regulator etc from wall carefully of serviceable condition and refixing the same after repiaring the wall/ fixing the tiles etc all as specified and directed by Engineer in Charge

Supply & Fix in repalcement of Bakelite sheet of size 8"x 4", 3mm thick with and incl cutting of sheet for fixing switch/socket/fan regulator etc, fixing of old serviceable/new switch/socket/fan regulator etc and making connection complete all as specified and directed by Engr-in-Charge.

Supply & Fix in repalcement of Bakelite sheet of size 6"x 8", 3mm thick with and incl cutting of sheet for fixing switch/socket/fan regulator etc, fixing of old serviceable/new switch/socket/fan regulator etc and making connection complete all as specified and directed by Engr-in-Charge.,

Supply & Fix in repalcement of Bakelite sheet of size 4"x 4", 3mm thick with and incl cutting of sheet for fixing switch/socket/fan regulator etc, fixing of old serviceable/new switch/socket/fan regulator etc and making connection complete all as specified and directed by Engr-in-Charge.

Supply & Fix in repalcement of Bakelite sheet of size 4"x 6", 3mm thick with and incl cutting of sheet for fixing switch/socket/fan regulator etc, fixing of old serviceable/new switch/socket/fan regulator etc and making connection complete all as specified and directed by Engr-in-Charge.

Supply & Fix in repalcement of Bakelite sheet of size 8"x 12", 3mm thick with and incl cutting of sheet for fixing switch/socket/fan regulator etc, fixing of old serviceable/new switch/socket/fan regulator etc and making connection complete all as specified and directed by Engr-in-Charge.

sony engineering works