PROVN OF CERTAIN REVENUE AND MINOR WORKS (PART III) AT LGJ MIL STN UNDER GE LALGARH JATTAN

Dismantling of existing Kota Stone Flooring including careful removal of slabs without undue breakage, cleaning of adhered mortar from underside, sorting of serviceable and unserviceable slabs, stacking of serviceable materials at site as directed, and disposal of unserviceable materials outside Defence land up to 50 m lead complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in factory manufactured ready-mix cement mortar (polymer modified dry mortar) set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in factory manufactured ready-mix cement mortar (polymer modified dry mortar) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in factory manufactured ready-mix cement mortar (polymer modified dry mortar) complete all as specified and directed.

Rounding off edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed

M & L for Mirror polishing on exiting marble/granite/Kota stone/Stone work where ever required to give high gloss finish complete all as specified and as directed by engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge.

M&L for providing and laying joint free premium quality double charged vitrified tiles 10 to 12 mm thick (rectangular/square), of approved make (Kajaria/Somany/Johnson or equivalent), of size as approved, on floor surfaces, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, laid with high performance polymer modified cement based tile adhesive conforming to IS 15477 (Type-2), over and including 15 mm thick screed/bedding layer in factory manufactured ready-mix cement mortar (polymer modified dry mortar) , finished true to line, level and slope as required, with proper alignment and uniform joints, joints filled and pointed with high quality epoxy grout of approved shade, including cutting, surface preparation, curing, wastage, all leads and lifts complete, all as specified and directed by Engineer-in-Charge.

All as per Item no 8 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in factory manufactured ready-mix cement mortar (polymer modified dry mortar) complete all as specified & directed by Engr-in-charge.

M&L for joint free high glossy premium quality colour glazed ceramic wall tiles 8 to 10 mm thick chamfred edges (rectangular/square) of approved make (Kajaria/Somany/Johnson or equivalent), of size as approved, on vertical surfaces such as dado, skirting and walls etc., area of each tile exceeding 0.18 sqm but not exceeding 0.42 sqm, fixed with high strength polymer modified cement based tile adhesive conforming to IS 15477 (Type-2), suitable for heavy duty tiles, over and including 10 mm thick backing coat infactory manufactured ready-mix cement mortar (polymer modified dry mortar) , finished true to line, level and plumb with proper alignment and uniform joints, joints filled and pointed with high performance epoxy grout of approved shade to match the colour of tiles, including necessary mechanical support wherever required for heavier tiles, surface preparation, curing, cutting, wastage, all leads and lifts complete, all as specified and directed by Engineer-in-Charge.