Construction of store cum Kitchenshed (Noon Meal ) for Panchayat Union Primary School at Alandha village and Panchayat in Karungulam Union of Thoothukudi District under PTMGR Noon Meal Scheme-2025-26-pakageno-01

Construction of store cum Kitchenshed (Noon Meal ) for Panchayat Union Primary School at Alandha village and Panchayat in Karungulam Union of Thoothukudi District under PTMGR Noon Meal Scheme-2025-26-pakageno-01

Earth work excavating and deposition on bank with intial lead and lift all clauses of soil such as hard stiff clay soil ,stiff black cotton soil small size boulders and hard gravel soil as per SS 20 B for foundation etc.,(0,0-0.30m)

Cement concrete 1:4:8 mix using 40mm metal including cost and conveyance of all materials and all labour charges etc complete

Random Rubble masonry in cm 1:5 required bond stone with simultaneous pointing including cost and conveyanceof all materials and all labour charges etc

Brick work in cm 1:5 mix using country bricks including cost and conveyance of all materials and all labour charges etc complete

Upto Basement

Ground Floor

Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center

Supplying and fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in positio etc

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance of all materials and all labour charges etc complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with cm 1:5, 12mm thick including cost and conveyance of all materials and all labour charges etc complete

Weathering coarse with Brick jelly lime concrete using 20mm brick jelly with stacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum

Finishing the top of roof with one course of pressed tiles of size 23 x 23x 2cm and top of pointing with cm 1:3 mix including cost and conveyance of charges etc

Granolithic flooring with CC 1:2:4 mix using 10mm - 12mm ISS chips HBG metal including all cost and conveyance of labour charges etc

Supply of door size of 0.90 x 2.10 including all cost and conveyance etc

Supply of Window of size of 0.90 x 1.30 including all cost and conveyance etc.,

Distempering two coats using best quality and approved colour oil bound distemper over one coat of cemet paint including all cost of labour charge etc.,

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIM ER)

Sub-Estimate for Electrification

Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open PVC light point SD 22

Wiring with 2 x 1.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open PVC Fan point SD 22

Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable colour for open PVC plug point.- SD -38.

Supply and Fixing of Ceiling fan(crompton make) includingn cost and conveyance of all materials and labour cherges etc complete. SD-107

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}