Repair to wooden furniture under BSO of GE (West) Ferozepur Cantt

Amount

Bed Plywood Supply & fixing of the following components/parts as in replacement of Bed Ply/Bed Niwar using 1st class seasoned hard wood free from knots and defects sheesham with one coat french polish including dismantling of unserviceable components/parts complete all as specified, shown on drg and as directed by Engineer-in-Charge.(FD-245 & 246). Replacement of unserviceable head side board covered with 3.00mm thick ply wood Sheesham face one side complete with short rail all as specified and shown on drg.

All as per ser item No 1.00 here in before but replacement foot side board complete all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 1.00 here in before but replacement of unserviceable ply wood top 12mm thick commercial(BWR) ISI mark (Make- Archid/Green Ply/ Century) complete all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 1.00 above but replacement of unserviceable long rail complete all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 1.00 above but replacement of unserviceable Stiffner complete all as per shown on drg and directed by Engineer -in - Charge.

Polishing to Bed newar and Bed ply top with french polish wooden portion exposed to direct vision except top ply wood complete all as per shown on drg and directed by Engineer -in - Charge.

Supply and fix of sheesham wood triangular support with nails to strengthen any component / part of bed plywood.

Table dressing ladies with mirror Supply & fixing of the following components/parts of table dressing ladies including dismantling unserviceable components all as specified and shown on drg.(FD-378&251) replacement of unserviceable looking mirror 5mm thick alongwith frame including one coat fench polish on the frame all as per shown on drg and directed by Engineer -in - Charge. Make of mirror:- ModiGuard/ Atul/ Swastic

All as per item No.8.00 here in before but replacement of broken Sliding glass 5mm thick clear sheet glass fixed in existing channel including adjustment of channel to make sliding freely all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.8.00 here in before but replacement of unserviceable drawer with CP Handle including one coat french polish on wooden portion all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.8.00 here in before but replacement of back ply wood with 6mm thick BWR commercial ply all as per shown on drg and directed by Engineer -in - Charge.

M& L for French polish to table dressing ladies complete all as per shown on drg and directed by Engineer -in - Charge.

Table dressing Gents with mirror Supply & fixing of the following components/parts of table dressing Gents including dismantling unserviceable components all as specified and shown on drg.(FD-31,230,379) Replacement of unserviceable new top made of 18/19mm thick prelaminated partical board exterior quatily teak shade one side,all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.13.00 here in before but replacement of unserviceable /looking mirror 5mm thick alongwith frame and back ply including one coat fench police on the frame all as per shown on drg and directed by Engineer -in - Charge. . Make of mirror modi Guard/Atul/Swastic

All as per item No.13.00 here in before but replacement of unserviceable drawer with CP Handle all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.13.00 here in before but replacement of back plywood with 6mm thick commercial plywood all as per shown on drg and directed by Engineer -in - Charge.

M&L for French polish to table dressing Gents complete all as per shown on drg and directed by Engineer -in - Charge.

Table 900x600x760 with drawer/without drawer Supply & fixing of the following components/parts of table 900x600x760mm using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components Drg. (FD-42 & FD-231). Replacement of unsv top of table 900x600x760mm should be 18mm thick prelaminated particle board exterior quality teak shade one side, including 4 mm thick Teak wood beading all round the top complete all as shown in drawing and directed by Engineer-in-Charge

All as per item No18.00 here in before but replacement of unserviceable leg all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.18.00 here in before but replacement of unserviceable top long rail all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.18.00 here in before but replacement of unserviceable top side rail all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.18.00 here in before but replacesment of unserviceable stiffener complete 'H' type all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.18.00 here in before but replacesment of unserviceable drawer complete with SS Handle including one coat french polish all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.18.00 here in before but replacesment of unserviceable triangular support all as per directed by Engineer -in - Charge.

M& L for French polish to table 900x600x760mm wooden portion complete all as per shown on drg and directed by Engineer -in - Charge.

Table centre Supply & fixing of the following components/ parts of table centre using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components drg.(FD-29 FD-134 FD-235).Replacement of unserviceable top made of 18/19mm thick prelaminated particle board exterior quality teak shade one side, including 4mm thick Teak wood beading all round the top complete all as shown in drawings and directed by Engineer-in Charge

All as per item No.26.00 here in before but replacement of unserviceable leg all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.26.00 here in before but replacement of unserviceable top long rail all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.26.00 here in before but replacement of unserviceable top short rail all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.26.00 here in before but replacement of unserviceable stiffener complete H type all as per shown on drg and directed by Engineer -in - Charge.

All as per item No 26 here in before but supply and fixing of sheesham wood triangular support with nails to strengthen table centre all as directed by Engineer-in-Charge

M& L for French polish to table centre wooden portion exposed to direct vision complete all as per shown on drg and directed by Engineer -in - Charge.

Teapoy wooden Supply & fixing of the following components/parts of teapoy wooden using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as per specified and shown on drg.(FD-34 & FD-232) Replacement of unserviceable top made of 18/19 mm thick prelaminated particle board exterior quality teak shade one side with 4mm thick teak wood beading all round the top all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.33.00 here in before but replacement of unserviceable leg all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.33.00 here in before but replacement of unserviceable top long rail all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.33.00 here in before but replacement of unserviceable top side rail, all as per shown on drg and directed by Engineer -in - Charge.

All as per item No.33.00 here in before but replacement of unserviceable stiffner complete H type all as per shown on drg and directed by Engineer -in - Charge.

All as per item No 33 here in bofore but supply and fixing of sheesham wood triangular support with nails to strengthen Teapoy Wooden all as directed by Engineer-in-Charge

M& L for French polish to teapoy wooden portion exposed to direct vision complete all as per directed by Engineer -in - Charge.

Table Writing Supply & fixing of the following components/parts of table writing using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components shown in drawings.(FD-249,268&275) Replacement of unserviceable top made of 18/19mm thick prelaminated particle board exerior quality of teak shade one side including 4mm thick Sheesham wood beading all round the top complete all as shown in drawings and directed by Engineer-in Charge.

All as per ser item No 40.00 here in before but replacement of unserviceable leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 40.00 here in before but replacement of unserviceable top long rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 40.00 here in before but replacement of unserviceable top short rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 40.00 here in before but replacement of unserviceable stiffner all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 40.00 here in before but replacement of drawer with SS Handle including one coat fench polish for table writing all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 40.00 here in before but replacement of unserviceable door shutter with SS Handle of table writing complete all as per drg and specified and directed by Engineer-in-Charge.

Supply and fixing of sheesham wood triangular support with nails to strengthen Table Writing all as directed by Engineer-in-Charge

M& L for French polish to table writing portion exposed to direct vision complete all as per shown on drg and directed by Engineer -in - Charge.

Table Dining 6 Pers Supply & fixing of following components/parts of table dining for 6 persons using 1st class seasoned hard wood Sheesham free from all knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed by Engr-in-Charge.(FD-30,239,273) Replacement of unserviceable top made out of prelaminated particle board 18/19mm thick exterior quality (Make- Novapan, wintuff, Action Tessa) with 4 mm teak wood beading all round the top as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 49.00 here in before but replacement of unserviceable leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 49.00 here in before but replacement of unserviceable top front rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 49.00 here in before but replacement of unserviceable side rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 49.00 here in before but replacement of unserviceable Stiffener all as per shown on drg and directed by Engineer -in - Charge.

Supply and fix of sheesham wood triangular support with nails to strengthen table dinning.

M& L for Polishing with French polish to table dining for 6 persons, wooden portion exposed to direct vision

Table Dining 8 Pers Supply & fixing of following components/parts of table dining for 8 persons using 1st class seasoned hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed by Engr-in-Charge:- (FD-30,239,273) Replacement of unserviceable top made out of prelaminated partical board 18/19mm thick exterior quality with 4mm Sheesham wood beading all round the top all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 56.00 here in before but replacement of unserviceable leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 56.00 here in before but replacement of top front rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 56.00 here in before but replacement of side rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 56.00 here in before but replacement of unserviceable Stiffener all as per shown on drg and directed by Engineer -in - Charge.

Supply and fix of sheesham wood triangular support with nails to strengthen table dinning 8 pers.

Polishing with french polish to table dining for 8 persons, wooden portion exposed to direct vision complete all as specified.

Chair Dining Supply & fixing of following components/parts of chair dining using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as specified Drg : (FD-16, 20,228, 279 & FD/MAP-II/05) Replacement of unserviceable front leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 63.00 here in before but replacement of unserviceable rear leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 63.00 here in before but replacement of unserviceable front / back seat rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 63.00 here in before but replacement of unserviceable side seat rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 63.00 here in before but replacement of unserviceable stiffener 'H' type all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 63.00 here in before but supply and fixing of sheesham wood triangular support with nails to strengthen Chair dinning.

Polishing with french polish to chair dining, wooden portion exposed to direct vision complete all as specified.

Chair Writing : Supply & fixing of following components/parts of chair writing using 1st class hardwood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components all as specified and directed(FD-56M,FD-280.Replacement of unserviceable front leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 70.00 here in before but replacement of unserviceable rear leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 70.00 here in before butreplacement of unserviceable front/ side/ back seat rail all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 70.00 here in before but replacement of unserviceable back rest all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 70.00 here in before but replacement of unserviceable stiffener H type completeall as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 70.00 here in before but replacement of unserviceable arms all as per shown on drg and directed by Engineer -in - Charge.

M& L forFrench polish to chair writing after replacement of above parts complete all as directed by Engineer -in - Charge.

Chair Easy Supply & fixing of following components/parts of chair easy using 1st class hard wood Sheesham free from knots and defects with one coat french polish including dismantling of unserviceable components of drg : (FD-17& 229). Replacement of unserviceable front/ Rear leg all as per shown on drg and directed by Engineer -in - Charge.

All as per ser item No 77.00 here in before but replacement of unserviceable front / Side/ back seat rail as per drawing.

All as per ser item No 77.00 here in before but replacement of unserviceable arms as per drawing.

M& L for French polish to chair easy after replacement of above parts complete all as directed by Engineer -in - Charge.

Canning (Chair Dining, Chair Writing, Chair Easy) Removing old unserviceable cane plastic from chair dining(Drg No FD-15,20,228,279) and supply and recaning with 2.0 to 2.5 bmm mm wide plastic cane woven in godrej pattern with white/pale cream colour cane and perimeter work with 3.5 to 4.0 mm wide plastic cane. Make of cane : 1st quality MPI (Premier)/SHAH or equivalent. All as specified and shown on drg and directed by Engineer-in-Charge .

All as per item 75.00 here in before but chair writing. (FD-56M,280)

All as per item 75.00 here in before but chair Easy. (FD-17,229)

Canning ( Chair Varandah) Taking down of unserviceable plastic canned / Newar/ PVC Seat & hard rubber shoes from chair verandah and apply one coat of synthetic enameled white paint to chair after preparing the surface of chair verandah.(FD-359) all as per shown on drg and directed by Engineer -in - Charge.

Repairing of chair varandah including cutting, welding, turning , bending etc all as directed by Engineer-in-charge.

Re-canning of chair verandah back and seat with cane plastic 4mm wide semi round white colour make : SHAH/PRIMER brand in mat pattern all as specified and shown on drawing.(FD-359)

Replacement of hard rubber shoes to leg of chair verandah of approved quality .(FD-256 & FD-359) all as per shown on drg and directed by Engineer -in - Charge.

Replacement of PVC Seat & Back (Chair Varandah Drg No. FD/MAP-II/15) Replacement of chair verandah Seat & back made out of 4 mm thick PVC moulded alongwith 4x10mm ribs & 90x10mm grooves as shown on drgs. the weight of seat / Back shall not be less than 0.90 Kg/ Make : AMKO/Swastik

Replacement of PVC Seat (Chair Dining Drg No. - FD/MAP-II/05) : Replacement of chair dining Seat made out of 4 mm thick PVC moulded alongwith 4x10mm ribs as shown on drgs. Make : AMKO/Swastik

Side Board Supply & fixing of the following components/parts of side board including dismantling of unserviceable components all as specified and shown in drawings.(FD-241,371,372,1112).Replacement of unserviceable top/ Bottom made of 18/19 mm thick prelaminated particle board of teak shade, 4 mm thick Teak wood beading all round the top with one coat french polish on beading complete all as shown in drawings and directed by Engineer-in Charge.

All as per ser item No 90.00 here in before but replacement of shutter both side left & right made of prelaminated particle board sheesam face with 4 mm Teak wood beading with one coat french polish on beading as directed by Engineer-in Charge..

All as per ser item No 90.00 here in before but replacement of unserviceable drawer with CP Handle all as shown in drawings and directed by Engineer-in Charge.

All as per ser item No 90.00 here in before but replacement of unserviceable back ply wood 6 mm thick BWR grade all as shown in drawings and directed by Engineer-in Charge.

All as per ser item No 90.00 here in before but replacement of unserviceable matalic knob by CP Handle as per directed by Engr-in-charge.

M& L for French polish to side board portion exposed to direct vision of wooden component/parts rest all as per directed by Engr-in-charge.

Hat Stand With Mirror Supply & fixing of the following components/parts of Hat stand with mirror, including dismantling of unserviceable components all as specified and shown on drg. (FD-233,361&362). Replacement of unserviceable back ply wood 6 mm thick as per directed by Engr-in-charge.

All as per item No.90.00 here in before but replacement of unserviceable front ply wood 3.5 mm thick teak face as per directed by Engr-in-charge.

All as per item No.90.00 here in before but replacement of unserviceable looking mirror of hat stand as per directed by Engr-in-charge.

All as per item No.90.00 here in before but replacement of unserviceable copper oxide steel hookes of size 120x75mm as per drg and directed by Engr-in-charge.

M& L for French polish to hat standing with mirror portion exposed to direct vision rest all as per directed by Engr-in-charge.

Peg Table Supply & fixing of the following components/parts of peg table using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish, including dismantling of unserviceable components all as specified and shown on drg. (FD-25,26,236,277&384).Replacement of unserviceable top of peg table made from 18/19mm prelaminated particle board of teak shade one side including 4 mm thick Sheesham wood beading all around the top complete all as shown in drawings and directed by Engineer-in Charge.

All as per item No 101.00 here in before but replacement of unserviceable leg as per drg and directed by Engineer-in Charge.

All as per item No.101.00 here in before but replacement of unserviceable top long rail as per drg and directed by Engineer-in Charge.

All as per item No.101.00 here in before but replacement of unserviceable top short rail as per drg and directed by Engineer-in Charge.

All as per item No.101.00 here in before but replacement of unserviceable stiffner complete H type as per drawing and directed by Engineer-in Charge.

All as per item No.101.00 here in before but supply and fixing of sheesham wood triangular support with nails to strengthen Table Peg all as directed by Engineer-in-Charge

M& L for French polish to peg table wooden portion exposed to direct vision complete all as specified and directed by Engineer-in Charge.

CHAIR DINING CUSHIONED Supply and fixing in replacement of unserviceable Front leg of Chair Dining MAP using 1st class seasoned hard wood sheesham free from knots and defects with one coat french polish including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge

All as per Ser item No. 108 here-in-before but Rear leg

All as per Ser item No. 108 here-in-before but side rail.

All as per Ser item No. 108 here-in-before but back rail.

All as per Ser item No. 108 here-in-before but stiffener 'H' type.

All as per Ser item No. 108 here-in-before but Foam cushion 75 mm thick and 40 Kg/cum density duly covered with tapestry cloth of approved quality by Engr-in- Charge / GE.

Supply and fix of sheesham wood triangular support with nails to strengthen Chair dinning cushioned.

Polishing to chair dining cushioned MAP with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and shown on drawing

TABLE BED SIDE MAP Supply & fixing in replacement of unsv top made out of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood all round the top of table bed side MAP including dismantling of unsv components all as specified shown on drg.(FD- FD/E6/MAP/15(R) and directed by Engr-in-charge

All as per Ser item No. 116.00 here-in-before but replacement of unsv side wall made out of 18/19 mm thick prelaminated particle board of Sheesham shad, with PVC edging / teak wood all round the sides rest all as per Drg and directed by Engineer-in Charge.

All as per Ser item No. 116.00 here-in-before but replacement of unsv rear wall of 6mm plywood and polishing complete rest all as per Drg and directed by Engineer-in Charge.

All as per Ser item No. 116.00 here-in-before but replacement of front part of bottom drawer made of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood all round complete as per drawing.

All as per Ser item No. 116.00 here-in-before but replacement of front part of upper drawer made of 18mm thick prelaminated particle board exterior quality with PVC edging / teak wood all round complete as per drawing

All as per Ser item No. 116.00 here-in-before but replacement Telescopic Channel of 1 mm thick on both sides of Table Bed side MAP complete as per drawing and directed by Engr-in-charge.

All as per Ser item No. 116.00 here-in-before but replacement CP Handle complete as per drawing and directed by Engr-in-charge.

All as per Ser item No. 116.00 here-in-before but replacement 18 guage thick black powder coated 18 mm Square frame work pipe as per drawing and directed by Engr-in-charge.

All as per Ser item No. 116.00 here-in-before but replacement PVC rubber shou of 18 mm Square frame pipe as directed by Engr-in-charge.

CHAIR SCHOOL WITH HAND BOARD Supply & fixing 18 mm thick pre laminated particle board top including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) screwed to . as in replacement of chiar school with hand board including dimantling of unsv components/parts complete all as specified and shown on drg as directed by Engineer-in-Charge.

All as per Ser item No. 117.00 here-in-before but Replacement of moulded one piece PVC back and seat , Make- Ballowal/ Blowplast

Preparation of old steel surface of chair school with hand board and applying one coat of black Japan paint complete all as specified and shown on drawing

TABLE DINING 4 PERS Supply & fixing in replacement of unsv top made out of 18/19mm thick prelaminated particle board of teak shade,(Make) 4mm Teak wood beading all round the top of table dinning of size 1200mmx900mmx760mm with one coat french polish including dismantling of unsv components all as specified and shown on drg.(FD/MAP-II/04)

All as per Ser item No. 128.00 here-in-before but replacement of unsv legs as per drg and directed by Engr-in-charge.

All as per Ser item No.120.00 here-in-before but replacement of unsv top front rail as per drg and directed by Engr-in-charge.

All as per Ser item No.120.00 here-in-before but replacement of unsv side rail as per drg and directed by Engr-in-charge.

Supply and fix of sheesham wood triangular support with nails to strengthen table dinning.

M&L for Polishing on complete surface of table dinning for 4 person on wooden portion to direct vision after replacement of above parts/ components..

CUSHION & COVER FOR SOFA &COUCH Supply & fixing inreplacement of unsv foam cushion of sofa set of 4/5 seated and couch CB 550x525x100mm 40 density covered with tapestry cloth of approved quality. Rate of Taestry clothe will be not less than Rs.110/- meter. Make of foam Sleep well/cool foam/Feather foam FD-281, 373 & DB-4084, 3972

Supply & fixing in replacement of unsv cover of foam cushion suitable for 550x525x 100mm thick cushion. Tapestry cloth of approved quality. Rate of Taestry clothe will be not less than Rs.110/- meter. FD-281, 373 & DB-4084, 3973

Removing old cloth tapstray from cushion of sofa and re-fixing the same by stitching after washing with surf including ironing all as specified and directed by Engineer-in-charge.

CHAIR DINING CUSHIONED LONG BACK Supply and fixing in replacement of unserviceable Front leg of Chair Dining cushioned long back using 1st class seasoned hard wood sheesham including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge

All as per Ser item No. 137 here-in-before but Rear leg as per drg and directed by Engr-in-charge.

All as per Ser item No. 137 here-in-before but side rail as per drg and directed by Engr-in-charge.

All as per Ser item No. 137 here-in-before but stiffener 'H' type as per drg and directed by Engr-in-charge.

All as per Ser item No. 137 here-in-before but Foam cushion 75 mm thick and 40 kg/cum density duly covered with tapestry cloth of approved quality. Make sleepwell/dunlop.

Supply and fixing of sheesham wood triangular support with nails to strengthen Chair dinning cushioned long back.

Polishing to chair dining cushioned Long back with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and shown on drawing

Stool Dressing with cushion : Foam cushion 75 mm thick and 40 kg/cum density duly covered with tapestry cloth of approved quality.

Supply and fixing in replacement of unserviceable leg, long/short rail of dressing stool with cushion using 1st class seasoned hard wood sheesham including dismantling of unsv components/parts complete all as specified and shown on drg as directed by Engr-in-charge

B.L. Chaudhri and Co.

S S BUILDERS

Sethi and Company

M/s Sham and Company

VRTRADERS

M/S Pee Kay Builders

Marwaha Builders