REPAIR AND REPLACEMENT OF SHAHABAD STONE TILES PCC FENCING AND DRAIN IN D1 D2 AND E3 IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Dismantling stone slab of any description or thickness in floors, approns etc complete all as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed

Dismantling of floor hearth or wall tiling including cement mortal bedding ( but not backing) removing serviceable tiles to store and rubbish off the premisses complete all as directed

S&F for glossy finished chequered cement concrete tiles 30cmx30cm & 30mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as directed

M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all as per manufacturer's instruction & as directed by Engineer-in-Charge

M&L for 30mm to 25mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3) complete all as directed

Ditto all as per Item Ser No 6 above but except sahabad stone

M&L for PCC (1:3:6) type C2 as in plinth protection finish surface even and smooth using extra cement (75 mm thick) incl forming dummy joints at 2mtr centre to centre and filled with lean mortar (1:8) complete all as directed by Engineer-in-Charge

M&L for PCC (1:2:4) type B-1 (20 mm graded aggregate) 40mm thick as in floor with even and smooth finishing without using extra cement complete all as directed

M & L for PCC (1:4:8) D2 (Using 40 mm graded stone aggregate) as in sub base 50 mm thick complete all as specified and as directed

Dismantling of Precast cement concrete block/stone boulder walling built in CM or Cement lime Mortar.

M&L for precast cement concrete block masonry exc. 10 cm width with solid block C5 Grade and setting in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster in CM( 1:4)on block walling surface finished even and smooth without using extra cement complete all as specified .

Providing precast cement concrete type B1 (1:2:4) 20 mm grade stone aggregate as in kerb stones window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, columns, posts, pler caps, boundary pillars, bed plates, pintle blocks, anchorage blocks, bounders (for stone walling) corbles, brackets, etc (of any section indicate), with plain fair faces is weatherings, throating etc and setting in CM (1:4) complete with joints to match all as specified and directed.

Taking down cement plaster of any description including racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in surface channels and drains complete all as specified and directed

M&L for preparation of newly plastered/concrete wall surface and applying two coats of cement base paint.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (Inner girth only measured).

Dismantling fencing wiremesh/barbed wire any type.

Dismantling posts or struts (steel or RCC) embedded in concrete, any section, including taking out embedded portion and making good the disturbed surface.

M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed

Supply, fabricate and fixing in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as spd and directed.(Steel confirming to Fe-290 (Gde E-165)) & fixing in position complete all as directed by Engineer-in-charge.

Fixing only in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as spd and directed.

Supply only of MS Galvanised chain link fencing, 3 mm nominal dia of wire, avg area of apperture 0.25 sqcm and/or weight of the fencing not less than 2.00 kg/sqm all as specified and diretced.

Fixing only MS galvanised chain link fencing, incl line wires any mesh, size and type to any type of standards, rails, straining bolts etc.incl provision of binding wire.

M&L for 8mm to 10 mm dia MS round bars cut to length bent to shape required etc..(to be used for stiffness to chain link) fixed indepdently to the angle iron post as directed by Engr-In-Charge. (Conforming to Fe 410w (Gde E-250) quality 'A' or Fe 290 (Gde E-125).

S&F MS screw bolts (machine made 12 mm dia. Shank) with hexagonal or square heads at one end and screwed at another end, each screwed end to be fitted with washer and one hexagonal or square nut, exc. 5cm n. exc 10 cm in length.

S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikers, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks & similar work conforming to Fe 290-0 Gde E-165 including removing old structure complete all as specified.

M & L for preparation of new untreated concrte surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic emamel paints over a coat of primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

M & L for taking down /dismantling and erection of steel gate after repair of opening n.exc 5 mtr any weight incl welding of any parts new/old, welding of pintal hinges, providing newpintal hinges where ever reqd, fixing of pintal hinges with column/wall. Please note other items required for repair to be paid under respective supply item.

Supply of mild steel in flat, ropund or square bars in available length confirming to FE 410 Quality A

Dismantling structural steel work incl doors, gates but excluding framed truss etc

S & F steel wire fabric n.exc 4 Kg/Sqm complete to wood or steel members

Sarkar Enterprises

M/S BHAREKAR CONSTRUCTION

Harish Enterprises

S Y Itkar Construction and Company

SUN Enterprises

M/s.C.D.Rathod

Mehta and Co.

M/S OMSAI ENTERPRISES

M/S B.A. GAIKWAD