Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-Finance | L1 | Accepted-Finance ok | |
| 2 | L2₹7.1 L+₹12,368.22 (1.76%)Rejected-Finance | L2 | Rejected-Finance Reject | |
| 3 | L3₹7.7 L+₹67,064.91 (9.57%)Rejected-Finance JUNGA DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L3 | Rejected-Finance Reject |
Tender Value
Refer Docs
EMD Value
₹15,370
Closing Date
25 Jul 2026, 10:30 amClosed
Executive Engineer HPPWD Shimla Division No. III
Executive Engineer HPPWD Shimla Division No. III
Repair renovation to various non residential buildings under division no III Shimla. SH Repair of rooms of staff of CM, deputy CM i.c P.F pine wood panelling, aluminium partition work, C.O cupboards painting and distempering work etc in Council Chamb
2026_PWD_139330_1
SD-III-6300-14dt.16-07-2026
Open Tender
Civil Works - Buildings
Percentage
30 days
Vidhan Sabha
As per SBD
9 documents required · 9 mandatory
₹350
₹15,370
31 Jul 2026
18 Jul 2026
25 Jul 2026
18 Jul 2026
25 Jul 2026
18 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing 9 mm thick plywood linning in flooring/linning of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) | 75.56 | Per Square metre | 763 | ₹57,652.28 |
| 2 | Providing and fixing 12mm thick imported pine wood ceiling/ panneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts | 52.42 | Per Square metre | 1,483 | ₹77,738.86 |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up tandard tubular sections/ appropriate Z sections and ther sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) | 186.42 | Per /kilogramme | 576 | ₹1,07,377.92 |
| 4 | Providing & fixing 3 mm thick laminated Aluminium Composite Panell (ACP SHEETS) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. | 19.1 | Per Square metre | 1,695 | ₹32,374.5 |
| 5 | Providing & Fixing Aluminium sliding G channels i/c roller with necessary fittings etc. complete including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge | 5.95 | Per running metre | 551 | ₹3,278.45 |
| 6 | Providing and fixing aluminium handle 250 mm long with SS screws etc .complete as per direction of Engineer-in Powder coated minimum thickness 50 micron aluminium tubular handle bar.complete including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge 200 mm long | 6 | Each | 89 | ₹534 |
| 7 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete. including carriage of materials within all leads and lifts. | 23.4 | Per Square metre | 1,271 | ₹29,741.4 |
| 8 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete.transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | 46.8 | Per Square metre | 754 | ₹35,287.2 |
| 9 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 150 mm ESS ESS made (doors and windows) | 24 | No | 212 | ₹5,088 |
| 10 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type | 24 | Nos | 34 | ₹816 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
BOQ_206442.xls
BOQ • 0.26 MB
SBD768212.pdf
Tender Documents • 3.58 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .