Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC | L1 | Accepted-AOC Bidder is L1 | |
| 2 | L2₹11.5 L+₹1.2 L (11.9%)Rejected-AOC | L2 | Rejected-AOC Bidder is L2 |
Tender Value
₹14.3 L
EMD Value
₹28,600
Closing Date
12 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Jalandhar Cantt
HQ CWE Nalwa Road Jalandhar Cantt PIN-144005
Please refer tender documents
2024_MES_640354_1
8323/70/E8
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
Class E Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
AGE (I) Suranussi
₹28,600
Yes
20 Jun 2024
2 Feb 2024
19 Mar 2024
2 Feb 2024
12 Mar 2024
29 Feb 2024
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.
Excavation in trenches not exc 1.5 m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified
Excavation over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified.
M & L for PCC 1:5:10 type E2 using 40mm agg as in foundation filling and mass concrete complete all as specified
M & L for RCC M-25 for slabs supported on walls, beams, columns and in shelves, the like all as specified and directed by Engineer - in - Charge .
M&L for RCCM-25 design mix as in footing, plinth beam like all as specified and directed
M & L RCC M-25 as in beams, cantilevers, bressummers, lintels over 1.5mtr clear span, chajja etc all as specified and directed by Engineer - in - Charge.
M & L RCC M-25 as in columns, pillars, piers, posts and struts all as specified and directed by Engineer - in - Charge. Note for serial item No 5 to 8 :- Foam work and reinforcement shall be measured and paid under respective items of BOQ.
M&L for brick works built in cement mortar (1:6) using sub class ‘B’ bricks (old size) straight or curved on plan exc. 6mm mean radius complete all as specified.
Returning ,filling in including spreading, levelling,watering and ramming in layers n. exc 25 cm thick each complete all as specified
Spreading and levelling in layers n exc. 25 cm thick well ramming including watering as required
Form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified and directed by Engineer – in – Charge.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) and similar work vertical or to batter copmlete all as specified
Form work to soffits of suspended slab such as roof slab n. exc 200mm thick (horizontal or sloping ) with rough finished surface complete all as specified
Form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular for rough finished surface of concrete all as specified and directed by Engineer - in - Charge.
Form work to edges of concrete flats,treads,floors and roofs n. exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar works exc 10 cm but n.exc 20 cm wide complete all as specified
M & L TMT bars 10 mmm dia and over dia cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified
Ditto all as per item No. 17 above but 6mm to 8mm dia
All as per item No. 17 above but 5mm dia and over as in stirrups, spacers and binders
M&L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick wall surfaces and surface finished even & smooth without using extra cement complete.
M&L for rendering 15 mm thick in CM 1:4 on brick or concrete wall surfaces and surface finished even & smooth without using extra cement complete.
M & L for 5 mm thick plaster in cement mortar 1:3 finished even and smooth without using extra cement to ceiling/chajja’s complete all as specified.
M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coats of cement base paint over a coat of alkali primer complete all as specified.
M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coat of oil based distemper over a coat of primer on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces of any description not otherwise described and applying two coats of white wash on ceiling complete all as specified and directed.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed by engineer-in-charge.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and as directed by engineer-in-charge.
M & L Hardcore (broken bricks)of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 50 mm thick PCC 1:3:6 type C2(using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed
M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base of floor complete all as specified and as directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)
M&L for 35 mm thick 2nd class hard wood, , factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed
M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed
S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed
S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed
S&F 300mm size mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified
S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified
S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.
S&F 300mm long mild steel ordinary rat rail rod pattern door spring including roller and roller plate complete all as specified and as directed by engineer-in-charge.
S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.
S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.
Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 8mm dia @10 cm c/c with MS flat iron of size 35mm x 4mm fixed to window frame. (viii) Fabrication and fixing Note : glass pan shall be measured and paid for separately.
Ditto all as per item No. 42 above but with Gauged shutter, Note : WIRE CLOTH shall be measured and paid for separately
S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm each panes complete all as specified.
M&L for two coats synthetic enamel paint on new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces.
M & L for 2 coats of synthetic enamel paint overa coat of red oxide primer including preparation of new steel surfaces complete all as specified
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.
M&L 18-20 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed or bedding layer in cm (1:4) complete all as specified and directed.
Supply and fix vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed.
S&F vitreous china water closet Padestal pattern( white ) includng P or S trap including fixing bolts, but excluding flushing cistern and flush pipe complete all as directed.
S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by Engineer-in-Charge.
S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.
S&F 20 mmdia GI tubing medium grade and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.
S&F pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.
S&F 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by engineer-in-charge.
S&F in 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by engineer-in-charge.
S&F Rotational moulded polythene water storage tanks five ply (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 complete all as specified and as directed
S&F PVC SWR pipe 110 mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified
S&F PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified
S&F 100 dia PTMT grating doom (min wt 25 gms) complete all as specified
S&F stack clamp made out of 50mm by 5mm flat iron & 16mm round iron stays to fix in position 100mm dia pipe, inculding bolts & nuts and securing ends of stays to wall or roof etc all as specified and as directed.
M&L Sand filling under floors or in foundations including watering and consolidation all as specified and directed by Engineer - in – Charge. .
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed by Engr - in - Charge.
M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge. Note :- (a) Sesmic provisions shall be provided all as per relevent Chief Engr TD Drgs. (b) Form work shall be deemed to be included in unit rates quoted.
Removing excavated material to a distance n.exc 50 mtr and deposietd where directed at a level n.exc 1.5 mtr from the styarting point as specified and directed by Engineer - in – Charge.
M&L for PCC 1:4:8 type D-2, 40mm graded stone aggregate as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid & tested.
M & L for 150 mm bore Reinforced concrete pipes, class NP2, laid and jointed complete drain pipe laid in trenches and pointed as specified.
Mainhole for 10 users all as specified and as shown in drgs.
Septic tank for 10 users all as specified and as shown in drgs.
Soakage well of following specifications :- Excavation in ordinary soil. Fdn PCC 1;3;6, wall of huney comb and solid brick work, RCC Band, RCC Cover siab, filling of brick bat complete size (1.80x3.00m) depth.
Material and labour for concealed point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-
One light point controlled by one switch with cable 1.5Sqmm Size
One Celing fan /Exhaust Fan point controlled by one switch with cable 1.5sqmm size
One 5 pin socket outlet 5 Amps on the same board.
One 5 pin socket outlet. 5 Amps on the independent. board
Supply & Fixing Switch piano flush type single pole one way 6 Amp
Supply and fixing Socket Outlet 3 pin 6 Amp flush type.
Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.
S & F double door sheet metal enclosures factory made DBs 4 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed
S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for single side connection LED tube in and including batten and tube etc complete in all respect.
S&F MCBs Single Pole of 240 volts 6-32 Amps,10KA Capacity, 'C' Series.
S&F MCBs Single pole + Neutral 240 Volts,32 Amps,10KA Capacity 'C' SERIES.
Supply & Fix Exhaust Fan heavy duty, Steel body AC Single Phase, 230 Volts of size 300 MM Sweep with blades & frame and Louvers
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).
Double door sheet metal enclosures factory made DBs 4 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable as per directed.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd and as per direted.
Material and Labour for earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia light grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed. Note : - Incase desired results of earthing are not otained than cantractor has to provide new earthing at his risk and cost. Payment for successful earthing with desired results shall only be made.
Supply,Laying of XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 16 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.
Excavation in trenches in Soft/disntegrated not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe/pole etc or soil for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified & directed by Engr-in-Charge.
Supply and fix common burnt clay building brick Sub class B designation 75 all as specified and directed.
S&F in repair GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection complete all as directed by Engr-in-Charge.
Supply and fixing gun-metal stop cock, valves,25 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
SUNRISE CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .