Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.8 L
EMD Value
₹6,000
Closing Date
30 Oct 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Jal Shakti Mech Div Sgr
Office Of The Executive Engineer Jal Shakti Phe Mechanical Division Srinagar
Renovation of office of the Asstt. Ex-Engineer and SDC office of Jal Shakti PHE Mechanical City Left Sub-Division Srinagar
2023_PHE_234509_1
PHE/MECH/E-NIT-55 of 10/2023
Open Tender
Civil Works - Others
Item Rate
20 days
City Left Subdivision
As Per NIT
2 documents required · 2 mandatory
₹100
Yes
Executive Engineer Jal Shakti Mech Div Sgr
₹6,000
Yes
11 Nov 2023
21 Oct 2023
31 Oct 2023
21 Oct 2023
30 Oct 2023
21 Oct 2023
Amount
Demolishing tile work including staking and disposal of unserviceable material within 50m lead 1 X 1.800m X 1.500m = 2.70 sm 2 X 2.250m X 1.500m = 7.8 sm 2 X 2.250m X 1.800m = 8.1 sm SDC Room 1 X 4.500m X 3.000m = 13.5sqm
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) SDC Room 1 X 4.500m X 3.000m X 0.100m= 1.35 cum Bathroom 1 X 1.800m X 1.500m X 0.100m= 0.27 cum
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm nominal size stone aggregate. SDC Room 1 X 4.500m X 3.000m = 13.5sqm Bathroom 1 X 1.800m X 1.500m= 2.7 sqm
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Bath room Floor and Walls 1 X 1.800m X 1.500m = 2.700 sm 2 X 2.250m X 1.800m = 8.100 sm 2 X 2.250m X 1.500m = 6.750 sm SDC Room 1 X 4.500m X 3.000m = 13.5sqm Net Quantity = 31.05sm
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Bath room Floor and Walls 1 X 1.800m X 1.500m = 2.700 sm 2 X 2.250m X 1.800m = 8.100 sm 2 X 2.250m X 1.500m = 6.750 sm SDC Room 1 X 4.500m X 3.000m = 13.5sqm Net Quantity = 31.05sm Deduction 1 X 0.600m X 0.600m = 0.36 sqm 1 X 1.000m X 2.100m =2.1 sqm Net Quantity = 28.59 sm
Painting with synthetic enamal paint of approved brand and manufacture to give an even shade two or more coats on old work to give an even shade Bathroom door 2 X 2.100m X 1.000m = 4.200 sm Bathroom ceiling 1 X 1.800m X 1.500m = 2.70 sm Bathroom window 2 X 0.600m X 0.600m =0.72 Sm SDC Office Room 2 X 4.500m X 2.250m = 20.25 sqm 2 X 3.000m X 2.250 m = 13.50 sm SDC Office room Ceiling 1 X 3.000m X 4.50 m = 13.50 sm Office (Front Side) including eaces soffit Fascia etc. 9.000x 2.250 = 20.5 sqm Total = 75.37 sm
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.68.1 White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend
Providing and fixing 3-layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)
Providing and fixing 100 mm sand cast iron grating for gully trap.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing brass stop cock of approved quality. 15 mm nominal bore
Providing and fixing soil, waste and vent pipes :
100mm, Sand cast iron S and S pipe as per IS:1729
75mm. Sand cast iron S and S pipe as per IS:1729
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) completes with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 18.73.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia with 25mm waste hole including all carriages upto site of work complete job.
Roller blinds (curtains) including fixing with necessary screws complete as per relevant IS specifications and directions of Engineer-in-Charge office room windows. Make shall be reputed and subject to approval of Engineer in charge. 2 X 1.350m X 1.150m = 12.688 sm 10.00 % for still / jamplaping etc. = 0.311 sm Net Quantity = 3.416
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing C.P. Brass extension nipple (size 5mmx50mm) of approved make and quality as per direction of Engineer-in charge.
Providing and fixing 15 mm nominal bore C.P. brass Non Telephonic Wall Mixer (Hindware/Jaguar/Czar)
providing and fitting of 35 Liter capacity water geyser(5 star- White) preferable makes Venus , Havells , Recold , Jupiton with all required fitting accessories for complete job
Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work 2(5.1+4.05)X2.250=41.175SQM (3.6X4.05) + (1.5X2.3)= 18.03 SQM
Repairs to the ceiling of Office room by way of dismantling the existing ceiling and refitting of same using skilled labour tools tackles etc. required for complete job
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns) of section 63 x 38x 1.15 mm Partition of 4.5 M x .250 MTR with 05 vertical posts at equispace of 0.300 mtr and 03 horizontal members (6 x2.250)+ (3x 4.5)=27 mtr Almirah boxes of 7.500 m X 0.600 X 0.600 m in dimensions. (2x 13x 0.600)+ (2x2x7/200)= 44.50 mtrs Total Length = 71.50mts Total Weight =71.50 mts @ 0.681 kg/mtr= 48.70 Kgs
Providing and fixing of Aluminum Sheet of 05 mm thickness for the almirah boxes including all the accessories required for the job using skilled labour nails tools and tackles etc. (0.6 x 0.6x 13) + (0.6 x 7.2x 2)= 4.68+8.64= 13.32 sqm= 143.20 sft
Providing and fixing 12mm thick pre laminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. 22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
Providing and fixing brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.
Providing and fixing aluminum tower bolts IS I marked anodized (anodic coating not less than Grade AC10 as per IS : 1868) Transparent or dyed to required colour or shape with necessary screws etc. complete.: 250x 10 mm
Providing and fixing aluminum handles IS I marked anodized (anodic coating not less than Grade AC10 as per IS : 1868) Transparent or dyed to required colour or shape with necessary screws etc. complete.: 125 mm
Providing and fixing 4mm thick coir veneer board ISI marked IS: 14842 plain lining with necessary screws, priming coat on unexposed surface etc. complete
Electrification of AEE office and SDC Office by way of P/F of lighting points should be run on Inverter also. Providing and fitting of Modular type board comprising of 6A Switch =10 No’s, 5-Pin 6A socket =06 No’s, Indicator= 02 No’s, Fan dimmer = 02 No, 3-Pin 16A Switch Socket Combine =06 No’s, 12-watt Slim Round Conceal Ceiling type = 10 No’s, Ceiling Fan=02 No, Main Switch board with input and output arrangement including P/F of MCB with box for control to be fitted outside the office. Make: L&T/Havells/Siemens/ Scheneider/GM/Anchor
P/F of 1.5 sqmm copper flexible required for lighting points as per site requirement after removing the damaged one
P/F of PVC conduit required for concealing of wire as per site requirement after removing the damaged one
BILAL AHMAD SURKHA
SHAMIM HAMID BHAT
M/S FAROOQ AHMED DAR
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .