REPAIR TO CHAJJA , FACIA, LEAKAGE, SEEPAGE AND MISC B/R WORK TO OTM AND MD ACCN IN ZONE-VI UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Material & labour for provision of Aluminium anodized frame work(snap grid) as in repair suitable for size as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 m anodized m thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete all as specified and directed

Material and labour for fibre cement sheet 6mm thick corrugated or semi-corrugated fixed in roofs, wall etc with J or L cranked hooks bolts including dismantling of old sheet of any description as in roof covering incl ridge and removing from site complete all as specified & directed

Dismantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete all as specified and directed.

Supply and fix 0.63mm thick plain galvanised, MS sheeting as in ridges, crumple section, hips, valley gutters, drips and straight flashings (length & girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding, ridges, fixed with self tapping screws as per manufacturer's instructions complete all as specified and directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for PCC 1:5:10 type E2 for filling in sunken floor (using 40 mm gradded crushed stone agg ) for filling in sunken portion complete all as specified and directed.

Material and labour for PCC 1:2;4 type B1 (using 20mm graded crushed stone aggregate) 75mm thick padding to required slop in sunken floor , finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar 1:3, mixed with liquid water proofing compound as per manufacturer's instructions on concrete surfaces of roof, finished even and smooth complete all as specified and directed (WPC shall be measured and paid under respective item of BOQ).

Demolition of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed

Material and labour for PCC padding 1:2:4 type B-1 (using 20mm graded stone aggregates) average thickness 25mm finished fair and even wihout using extra cement on roof surfaces complete all as specified and directed.

Material and labour for 20mm thick rendering in cement mortar 1:4, mixed with liquid water proofing compound as per manufacturer's instructions on concrete surfaces of roof, finished even and smooth complete all as specified and directed (WPC shall be measured and paid separately under res item of BOQ ).

Material & labour for cleaning of concrete surfaces and applying priming coat of bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm of 85/25 grade industrial bitumen, over it laid with APP modified polymeric water proofing membrane non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top surfaces with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

Supply only Integral water proofing compound (BIS/ISI marked on packing)complete all as specified and directed.

Supply and fix as in repair cast iron 'P' or 'S' trap, ISI marked, suitable for 100mm bore CI spun pipes complete all as specified and directed.

Supply and fixe 15 mm bore tubes medium grade galvanized with all fittings fixed to walls ceiling or laid in floors including taking up or down GI steel tubing, testing etc complete all as specified and directed.

All as per item No 16.00 above but 20 mm bore complete all as specified and directed.

Suuply & fix in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair.

Suuply & fix in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

Suuply & fix in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & fix in repair telephonic wall mixer with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (provision for hand shower) complete all as specified and directed.

Suuply & fix in repair chromium plated angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified.

Supply & fix in repair 15 mm bore bib taps, standard of PTMT any colour, high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fix in repair Vitreous China squatting pan Orissa pattern, size, 580x440mm, white, with integral footrest, and with 'P' or 'S' trap including connection to flushing cistern & flush pipe and making good the distrubed surfaces to match with existing surface complete all as specified and directed.

Supply & fix in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to outgoing pipes and flush pipe complete all as specified and directed.

Supply and fix in repair 10 litres capacity, (dual type) PVC valve less, syphonic action type flushing cistern, low level, white with inlet ball valve float, handle and flush pipe including brackets complete all as specified and directed.

Supply and fix in repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin, white, flat back, size 580 x 440 mm including fixing acessories like galvanised brackets & rag bolts, 32mm CP brass waste coupling complete all as specified and directed.

Supplied and fixed in repair 75 mm size brass chormium plated shower roses with swivel joints including fixing to steel pipe or union 15mm bore complete all as specified and directed.

Supply and fix in repair brass chromium plated jet spray with 15mm bore flexible pipe of standard length of approved make complete all as specified and directed.

Supply and fix in repair brass chormium plated hand shower roses with 1.00 mtr PVC flexible pipe including fixing to steel pipe or union 15mm bore complete all as specified and directed.

Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fix in repair 32/40mm bore PVC waste pipe complete all as specified and directed all as specified and directed.

Supply and fix in repair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fix three layered rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down old existing unserviceable water tank complete all as specified and directed.

All as per item No 36.00 above but 1000 Ltr capacity complete all as specified and directed.

Supply and fix for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(minimum weight 210 gms).

All as per item No 38.00 above but herein but fixed in repairs complete all as specified and directed.

Supply and fix in repair 15 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply and fix in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed.

All as per item No 42.00 above but 110mm bore pipe complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

All as per item No 44.00 above but 110mm bore pipe complete all as specified and directed.

Supply & fix in repair PVC floor trap with mild steel chromium plated grating including jointing to waste pipe, 75mm dia complete all as specified and directed.

Supply and fix in repair 100/125 mm dia mild steel chromium plated gratings fixed in cement mortar complete all as specified and directed.

Supply and fix in repair 15 mm bore concealed stop valve, fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron complete all as specified and directed.

Material and labour for non skid ceramic floor tiles of size 600mmX600mm, 10 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 15mm thick screed bed in cement mortar (1:6) including dismantling of old tiles complete all as specified and directed.

Material and labour for non skid glazed ceramic coloured tiles of size 400mmX400mm, 8mm thick as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 15mm thick screed bed in cement mortar (1:6) including dismantling of old tiles complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (premium quality) of size 450mmX300mm, 8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed.

Demolition of cement concrete as in ground floor and paving n.exc 15cm thick (below or above ground level) and removing debries to a distance not exc 100m complete all as specified and directed by Engr-in-Charge .

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on RCC chajja,roof slabs and projection on top of chajja etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed .

Material and labour rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified.

Material and Labour for 10mm thick rendering on concrete surface as in ceiling in cement mortar 1:3, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for three coats of white washing on new ceiling/chajja surfaces including preparation of surfaces complete all as specified by Engr-In-Charge.

Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primer/putty to match the existing as required, complete all as specified & directed.

Materials & labour for prepration of newly plastered surface and finishing the surfaces of wall with wall care putty and applying two coat of Oil Bound distemper , complete all as specified & directed.

Demolition of reinforced cement concrete n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Material and labour for mild steel framed work as in chhaja sun shade at any height incl all necessary scatterding welding and fixed to wall all as specified and directed by Engr-In-Charge.

Material and labour for in repair 2mm thick fiber glass reinforced transulant plain sheet fixed with and incl coach screw and nut bolts etc as in sun shade chajjas etc fixed in any position and height complete all as specified and directed by Engr-In-Charge.

Supply and fix in repair Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections etc complete all as specified and directed.

Supply and fix in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as directed.

Materials and labour for 12mm thick black granite slab (width and length as per site requirement) bedded overand including 10mm thick screed bed /rendering in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement and admixture of pigment to match including dismantling old slab complete all as specified and directed.

Material and labour for rectifying the leakage of wall mixer/wash basin mixer/sink mixer of any type by replacing rubber /PVC washer and brass spindle of required size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair 15mm bore dia single lever sink mixer with swinging spout (wall mounted model). chromium plated fancy type cast copper alloy screwed down, complete all as specified and directed.

Material and labour for repair of rolling shutters(any type) exc 8 Sqm n.exc 20sqm each by taking down and refixing the same after straightening of iron members and repairs including any steel member required to be changed if any to made functional complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour 60 mm thick, interlocking paver block PCC M-35 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed.

Material and labour PCC 1:4:8 type D2, 75 mm thick (using 40 mm graded crushed stone aggregate) as in as in sub base of flooring complete all as specified.

Material and labour Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix stainless steel sink fixed in repair with draining board, made out of 1.00 mm thick sheet for kitchen with waste pipe, CI cantilever brackets, connecting union over all size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed

Supply & fix stainless steel plate rack fixed in repair of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed