Providing Distribution System in Lift Irrigation Scheme Chak Kathal under HPCDP(Phase-II)-JICA-ODA at Village Chak Kathal,G.P Kala Amb,Tehsil and Distt. Hamirpur (H.P)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as directed,for all kinds of soils within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition for all kinds of soilcomplete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete 1:4:8 (1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in foundation & plinth and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete 1:5:10 (1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) in foundation and plinth and curing complete excluding the cost of centering and shuttering complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Foundation & plinth excluding the cost of centering, shuttering & reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

In walls (any thickness),in retaining walls,return walls, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto all level, excluding the cost of centering, shuttering and reinforcement complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns, mass concrete complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing Mild steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing & Fixing of 63mm hydrant with Main or submain line inlcuding HDPE Riser 63mm Double Threaded P.N-10.0,63mm PP Ball Valve,Bend,Male Female Coupler Threaded P.N-10.0,Service Saddle P.N-10.0 and elbow bend with steel clamp complete in all respect and jointing by electrofusion process for disribution system with 90 mm Dia (as per requirement of main & submain Line) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing Valve Box for hydrant Size 12" Box (Rectangular) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Fixing with epoxy paint (Two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat,prepration of surface etc complete in all respect within all leads and lifts to the entire satisfaction of Engineer-in-Charge

HDPE Pipes, Class P.N-6.0;PE-100

HDPE Distribution Pipe

OL-2-OL3,OL-8 to OL-10,OL8 to OL-9 and OL-5 to OL-6

Providing & Fixing CI Sluice Valve 80mm dia @ 10.2 Kg/cmˆ2(P.N 1.0) Kartar make i/c MS Flange of table as per IS 6392-1971 of 5WT of 31.30 Kg & Welding of MS Flanges in two layers on both faces & i/c carriges in all respect within all leads and lift.