EE/RDSD/LATEHAR/50/2025-26

Labour for site clearance and cleaning old wall, surface, roof etc. all complete job.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.7)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

Providing and fixing stainless steel (Grade 304) railing made of Hoollow tubes, channels ,plates etc. including welding grinding buffing ,polishing and making curvature (wherever required) and fitting the same with necessary stanless steel nuts and bolts complete,i/c fixing the railing with necessary accessories &stanless steel dash fasteners, stainless steel bolts etc, of required size,on the top of the floor or the side of waist slab with suitable arrangment as per approval of Engineer -in charge ,( for paymentpurpose only wieght of stanless steel members shall be considered excluding fixing accessores such as nuts, bolts, fasteners etc.)

Providing and Fixing 18mm tick gang saw cut mirror polished (permoulded &prepolished ) machine cut Udaipur Green Marble For Counter top of pantry &window Cills of required size of approved shade, color and textureclaid over 20mm thick base of cement Mortar 1:4 (1Cement:4Coarse sand) laid and jointed with White cement.mixed with matching pigment ,epoxy touch ups, including rubbing curing moulding and polished to edge to give high gloss finish etc.complete at all levels.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, taxes and royalty all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.7.6

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.45

Providing and laying APP (Atactic Polypropylene Polymer)modified prefabricated five layer 3mm thick water proofing membrene,black finished reinforced with non woven polyster matt consisting of a coat of bitumen primer for bitumen membrene @0.40 lit/sqm by the same membrene manufacture of density at 25 degree celcious........do...... of E/I DSR 14.91.1

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. D.S.R. Item No. 13.26

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding , washing of floors and taxes all complete as per specification and direction of E/I. B.C.D. S.O.R. Item No. 5.8.18

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). D.S.R. Item No. 13.46.1

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. D.S.R. Item No. 12.41.2

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Carriage of materialS Cement

Stone Chips

Steel

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

2 x 10 sq.mm + 1 x 10 sq.mm earth wire

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/angle holder including connection etc. as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 amps Double Pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm x 75mm x 50mm

121mm x 173mm x 48mm

170mm x 221mm x 48mm

Supplying and fixing of ceiling fan - 48" dia with regulator.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of holder type LED - 9/10 watt

20/22 W LED Tube Light

P & F of 1x 250W H.P.S.V. Fitting with all asso. (but without pole) make bajaj/equ)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work15 mm nominal

20 mm nominal

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal outer dia Pipes

Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job.a) 125mm thick

b) 250mm thick

Providing and fixing gate valve of approved quality with complete job, 25 mm dia

Supplying Polythene water storage tank of ISI mark (e.g. sintex / Sinter / Himgiri / Gangotri etc.) with cover and locking system.

Providing and fixing male ended 15mm dia brass bib cock with complete job

Providing and fixing 15 mm size C.P. brass pillar cock C.I. body brass spindle pillar cock with complete job(C.I. Body brass spindle)

Providing & Fixing Stainless steel Kitchen sink with complete job. 610x510 mm bowl depth 200 mm

Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other with complete job

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job , with 12.50 liter low level PVC Cistern

Providing, fitting and fixing 40mm high vitreous white glazed earthen EWC with p trap of Parry Hindustan or any other approved with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 10 ltr low level PVC cistern

SFF flat back or angular lipped front vitreous white glazed earthen ware urinal of Hindustan Parrry or any other approved with all complete job.

Supplying fitting and fixing the following items complete with all with complete joba) Mirror of 6mm thick plate glass 600x450mm size

b).Soap Dish

c).Towel rail

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.a).Door tee- 110mm

b) Dlain bend - 110mm

c)Single tee without door - 110mm

200x165x125mm dia borewell - Supplying all materials, labours, tools & equipments for drilling -do-(a) from 0.00 m to 50.0m

(b) from 51.0m to 125.0m

Supplying, assembling, lowering and fixing in vertical Position in bore well, unplasticized PVC medium well Casing (CM) pipe of required dia, 200 mm nominal size -do-

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189 -do-

Providing and fixing suitable size threaded mild steel cap for borewell of 200mm dia -do-

Providing and fixing suitable size threaded mild steel clamp for borewell of 200mm dia -do-

S/F KIRLOSKER/CRI make 1.5HP submersible pump set having 100m, including all taxes, royalty etc. all complete job as per direction of E/I.

(b) Starter 5HP

(c) 2.5 mm2 copper finolex submersible cable

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32mm G.I Pipe -do-

Add 18% GST

Add 1% Labour Cess

Please Enable Macros to View BoQ information