Construction, Testing and Commissioning of 33 No. Public Toilets in Srinagar City

Amount

Clearance of site including levelling & neatly dressing of disposed soil and materials completely as directed by Engineer-in-charge

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres.

Providing and laying Stone soling including compacting, watering including all carriages of material complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering. finishing and reinforcement all work up to all levels 1:1.5:3 (1 cement: 1.5 coarse sand; 3 graded stone aggregate 20mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1Cement 3 fine sand 6 grade stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc removal of form work in:

Foundation Works

Suspended Floors

Edge of Slabs

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimensions

Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete Mild steel and medium tensile steel bars

Providing and laying Boulder / GSB filling including all carriages of material complete

Brickwork with FPS bricks of class designation 75 in superstructure up to all floors. Including carriage of Bricks in cement mortar 1 cement 4 fine sand mortar

Half brick masonry with bricks of class designation 75 in superstructure up to all floor levels. In cement mortar 1cement 4 fine sand mortar.

Providing and Laying of 40mm thick concrete flooring in rooms in M-15 (1:2:4) nominal mix (max size of aggregate 20mm) concrete.

Providing and applying average 12 mm thk cement plaster in single coat in cement sand mortar 1:6 to all surfaces at all levels including surface preparation, staging, scaffolding as directed

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make all colours shades except burgundy, bottle green, black of any size as proved by Engineer-in-Charge, in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sandy and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing white cement mixed with the pigment of matching shade complete

Providing and laying 600x600mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing 1st quality Exterior Wall Tile Clading of approved make like in all colors, shades of any size as approved by Engineer in Charge laid over 12mm thick bed of cement mortar 1:4 (1 Cement 4 coarse sand)

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window ills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16mm thick

Providing edge moulding to 18 mm/16 mm thick marble stone counters. Vanities etc, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and fixing of Coloured Precast Cement Concrete Chequered tiles 25mm thick(300mm x 300mm) over layer of cement motar of mix 1:6 including grouting with matching pigment complete in finished form.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing of Powder Coated Aluminium Doors of approved sections including cost of Powder Coated Aluminium chowkats (50mm x 45mm), panneling of 12mm thick MDF Boards, hardware fittings like hinges, aldrops, tower bolts, etc complete in fitted form.

Providing and fixing of Powder Coated Aluminium Window Shutters with 3.50mm thick glass pans in openings including cost of Powder Coated Aluminium Chowkats of approved size (50mm x 45mm), Powder Coated aluminium beadings, sliding channels where ever required, complete in finished form.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing of Track dac powder coated sheet roofing including cost of screws, etc in roofs, walls, gables, etc complete as per directions of engineer in charge.(0.50mm thick)

Providing and fixing of 10mm thick Ready made wooden Panneling in sofits including cost of Touchwood polish, screws, etc in Soffits, walls. gables, etc complete as per directions of engineer in charge.

Providing and fixing of Powder coated ridges or hips of width 30cm over all width plain G.I sheet fixed with nails.

Providing and fixing of planed eaves boarding 250x32 mm (nominal size) size of 2nd class kail wood

Providing and laying of Dry random rubble masonry with hard stone in foundation and plinth using quarry stone.

Removal of Malba beyond muncipal limits by engaging mechnical transport including loading, unloading and all leads, lifts complete

Providing and Fixing of Stainless Steel railing made of Hollow tube channel of specified dwsign, specifications, diminsions with king post (naval posts) of specified design, diminsions at specified places complete job as per directions of Engineer Incharge.

Construction of brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1.3 (1 cement 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement 2 coarse sand: 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. Size 45 x 45 x 45cm deep including PVC manhole cover with frame.

Providing and fixing of water closet squatting pan (Indian type W.C. pan) with including cost of Concealed cistern 80mm thick with flush support Parry ware / Hind ware / Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, Including cost of Concealed cistern 80mm thick with flush support Parry ware/Hind ware/Ceria as approved with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with 1St marked white solid plastic seat and lid.

Providing and fixing dual purpose closet (Anglo India W.C.) suitable for use as squatting pan or European tyos water closet as per maunfacturer's specification, including cost of Conealed cistern 80mm thick with flush support Parry ware / Hind ware / Ceria as approved with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

Providing and fixing of Counter Sink Wash cutting basin ceramic and making good walls type of minimum 400 x 400mm six including wherever required.

Providing and fixing of white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm respectively with automatic Concealed flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre PVC white automatic flushing cistern of approved quality.

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement morta

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge

Providing and fixing of PVC pipe (Type "B") in proper gradient.

100mm Dia

75mm Dia

Providing and fixing of PVC fittings

100mm Dia Plain Bend

100mm Dia Plain Tee

100mm Dia Door Bend

Reduced 100mm to 75mm

75mm Dia Plain Bend

75mm Dia Floor Trap

Providing and placing on terrace (at all floor levels) polythene water storage tank(of capacity 500 lires each) with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank.

Providing and fixing of 1.00HP Water motor of approved Greaves) including all accessories complete.

Providing and fixing of 0.5HP Water motor of approved Greaves) including all accessories complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc

15mm nominal outer dia pipes.

20mm nominal outer dia pipes

25mm nominal outer dia pipes

32mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenghing, refilling etc. 32mm nominal outer dia pipes

Providing and fixing of CP Angle Valve of approved make (Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of Long Body Bib Cock of approved make (Jaquar Cera, Resp) including all accessories complete.

Providing and fixing of Wash Basin Mixer of approved make (Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of Two in One Angle Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of Health Fuacet with chain of approved make (Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of CP Towel Rod 600mm Long of approved make(Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of CP Soap Case of approved make (Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of CP Connection 600mm-450mm long of approved make including all accessories complete.

Providing and fixing of CP Grating of approved make (Jaquar, Cera, Resp) including all accessories complete.

Providing and fixing of CP Nipples 50mm long of approved make including all accessories complete.

Providing and fixing of CP Cups of approved make (Jaquar, including all accessories complete.

Providing and fixing PTMT soap dish holder having the length of 138mm, breadth 102mm, the height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing of Stain less steel paper holder with stand approved make including all accessories complete.

Providing and fixing of Stainless steel paddle operated dustbin of approved make including all accessories complete.

Providing and fixing of Water proof Autiomatic Hand Dryer Machine with durbale time 5 Sec, Voltage 200-240V 50 Hz, Wind Teperature 65C+ 15C of approved make and design complete job including all accessories complete.

Providing and fixing of the 300mm Exhaust Fan (Crompton make) as per approved specifications. Complete item

Providing and fixing of 25 Ltr water heater (geysers) of approved make including cost of dash fasteners with nuts and washers, complete.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and Fixing of Stainless steel garden/ sitting bench (Three Seater) of approved make and design including all carriages and fixing charges complete. The Cost shall include foxing of chairs in cement concrete block (12 x 12 x 24") of Mix 1:2:4 including necessary Earthwork, Shuttering, etc complete job.

Providing and Fixing of Pole Mount Stainless Steel Ornamental Garden Dust Bins 50 Ltr Capacity with stand of approved make and design including all carriages and fixing charges complete. Cost shall include anchoring of base in concrete foundation (1:2:4), complete job.

Providing and fixing of the following Electrical Points as per approved specifications, complete:

Lighting Points

Heating Points

External lights

LED Lights

MCB Box

MCB 32 Amp

MCB 16 Amp

Providing and fixing of copper wire(7/20) as per approved specifications, complete.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Providing, Supplying, Instalation and commissioning of High Efficiency 1kW solar plant with Combo 800Watt Solar Panel (2 No x 400 watt solar panels), 1KVA-12V rMPTT Gamma Plus Solar inverter, C10 rated solar battery (UST 1560) with unique tubular gauntel/ Nat positive plate design and other complete solar accessories. With long power backup, heavy-duty solar battery with superior active material and special grid alloy to provide 5 to 7 hours long power backup. Easy and safe to install, waterproof and dustproof junction box at the back Varranty upto 20 Years for solar panel, 5 years solar battery warranty and 3 years inverter warranty.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing. specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

SIDDHARTHALAXMI ENGITECH PVT LTD

M/S ALTAF CONSTRUCTIONS