REPAIR TO JOINERY ,FLOORING, PLASTER,PLUMBING AND CIVIL WORK TO JCOS AND ,ORS MD ACCN AT GE DRONACHAL BHOPAL

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc.

M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete.

M&L Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall with old size bricks built in cement mortar 1:4 complete.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc.

M&L Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete .

-Ditto- all as per Srl item No. 6 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound Note:- supply only of W P C shall be measured and paid separately

M&L for Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete.

M&L Preparation of newly plastered surfaces of walls and applying three coats of white wash complete.

-Ditto- all as per Srl Item No. 8 here-in-before, but on ceiling

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust, etc

M&L Brushing neat cement slurry with 3.0kg of cement per sq. metre

M&L 75mm thick PCC 1:4:8, type D-2 as in sub base for pavement, path, floor etc.

M&L for laying of Sand in base for cushion of PCC inter locking blocks complete all as specified and directed:

M&L for factory made Machine pressed precast 60mm thick coloured chemically treated PCC inter locking blocks (ISI Marked ) M-35 grade of desgin & pattern approved by GE as in footpath and filling of joints with Narmada fine sand complete all speciified a

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete.

M & L for Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete .

M&L for glazed ceramic tiles coloured digital with highlighter and approved design and pattern by G E of size 450x300 x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles, complete all as specified and directed

M&L for glazed ceramic tiles coloured of size 300 x 200x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles, complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete.

M&L for screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed

M&L for non skid cramic tiles colured of size area of each tile exc. 0.18 sqm but not but not exc 0.38 sqm in skriting ok dado jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed

M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 7mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match complete all as specified and directed

M&L for 20-25 mm thick machine cut mirror polished kota stone slab flooring with Kota stone not less then 550X550mm size, laid over cement screed of 15mm thick in CM 1:4 laid & jointed with gray cement slorry mixed with pigment to match the shade of the slab including

All as per item No 27 but fixed in skirting size required at site all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) sing marble dust with admixture of pigment to match with shade of granite. inlcuing grinding and polishing complete all as specified and directed.

M&L for green broad marble 18 to 20mm thick machine cut in size not less 0.60 wide and 1.20m long in one piece, bedded and jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of green board stone including cutting & polishing complete all as specified and directed.

M&L for 20 to 25mm thick polished cuddappa stone slabs set over and incl 15mm thick bedding in cement mortar 1:4 on cooking and preparation platform, fixed in repair complete.

M&L for mirror polished rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as directed.

S & F in repair light coloured vitreous china WHB white oval shape of 500mmx400mm (minimun) on new brackets excluding taps waste china & plug including bracket etc complete all as specified .

Supply and fixing in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes and bed concrete etc complete

Supply and fixing in repair Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete

Supply and fixing in repair Plastic water closet seat,any colour as available, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing complete.

Supply & fixing in repair Jet spray for water closet pan pedestal pattern in repair.

S & F PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete.

Supply and fixing in repair light coloured vitreous china wash hand basin white available shape as approved of 500mmx400mm (minimun) on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified .

S & F Sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm supplied and fixed in repairs complete.

S&Fix ed in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 600 mm of best quality of approved make .

S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete.

S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete.

M & L 32 mm bore waste fittings, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete.

S&Fixed in repair PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

Stainless steel gratings 100mm bore size fixed with cement motar.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and directed.

-Ditto- all as per item No. 48 here- in- before but 20 mm bore.

15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete.

-Ditto- all as per item No 50 here in before but 20mm bore.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed.

-Ditto- all as per item No 52 here- in- before but 20 mm bore.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete.

-Ditto- all as per item No55 here- in- before but 20 mm bore.

Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed in repair.

Swivel shower of PTMT any colour for fixing with 15 mm pipe (minimum weight 40 gm), supplied and fixed in repairs complete.

S & F CP Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete.

S & F CP Pillar taps fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete.

S&F, in repair of fancy type CP pillar taps for iron pipe of 15mm bore cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts all as specified and directed.

S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete.

S & F Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete.

S&F Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete.

-Ditto- all as per Srl item No.64 here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each shutter complete.

M&L for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc.

------Ditto--------- but without taking down of shutter from chowkhats

S & F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete.

All as per item No 69 here-in-before but of size 125 x 60 mm complete

PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete.

PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete.

S&F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete.

S&F 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete.

S&F 35 mm thick factory made flush shutter, solid core construction with particle board core and ply wood face panels commecial type on both sides

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 as specified and as directed

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified

S&F 18 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work including external fixing of teak wood lipping 6 mm thick with nails and french polishing to teak wood lipping

S & F IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete.

S&F aluminium handles extruded type of size 125mm, complete all as specified and directed.

S & F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete.

Supply and fixing in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

S&F fixed 100mm hasp and staple mild steel safety type stove enamelled black including bolt to hinge plate and fixed with screw 150mm long.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F as in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&Fixed in repair of continuous plano hinges mild steel bright finish or electro galvanised for 30mm thickness.

S&F in repair coloured powder coated Darpery Rod of aluminum 25mm inner dia With suppored on coloured powder coated aluminum decorative type designe and pattern approved by GE, brackets both ends complete all as specified . Make :- Vista or equivelent

S & F in repair, 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete.

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of oil emulsion distemper all as specified and directed.

Preparing old treated surfaces of walls (plastered or unplastered surfaces) and applying one coat of cement base paint.

S&Fixed in repair of looking mirror 5mm thick of best quality fixed over 6mm thick plywood & PVC or wooden bead on all arround with hangings arrangement complete.

S&F in repair PVC Mirror cabinet of size 0.45x 0.30m with doorshutter complete all as specified .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete.

S&F 3mm plain sheet glass ordinary quality and glazing with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane (Beads shall be measured and paid separately) complete all as specified and directed.

All as per item No 98 above but 3mm thick glass pane fixed in for cupboard and self in repairs.including rollar /wheel for sliding complete all as specified and directed .

S&F in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors of 110mm bore inculding cutting out wall /concrete and finishing of surface to match existing surface .

S&F in repair PVC (SWR) pipe bend door of 110mm bore with access door inculding cutting out wall /concrete and finishing of surface to match existing surface .

S&F in repair PVC(SWR) P trap 125/110 mm bore including cutting out wall /concrete and finishing of surface to match existing surface .

M&L for welding in repairs hinges , handle , lock , tower bolt , sliding bolt ,rat rail , peg stay ,peg set ,not exc 6mm and not exc 9 mm in thickness. by welding etc complete all as directed by engineer incharge

Demolition of PCC in any position work up to Ist floor complete all as specified and directed

M/L applying epoxy treatment with nitto bond AR of FOS-ROC or equivalent to the sunken surfaces of floor and testing the same for 48 hours with complete filling with in the sunken floor work up to 1th storey complete all as specified and directed

M/L for filling polymer modified non shnnking slurry for sunken floors for toilets by drilling holes at 1M interval to a depth of 60mmX 20mm dia and applying slurry all as per techical specification and as requied complete work up to 4th storey complete all as specified and directed

M/L PCC 1:2:4 type B1 using 20mm graded stone aggregate 40mm thick (average) with WPC work complete all as specified and directed

M & L Rendering 15mm thick in CM 1:3 mixed with WPC on fair faces concrete surfaces work.complete all as specified and directed

Supply only integral water proofing compound

M&L for PCC 1:5:10 type D2 (using 40mm graded stone aggregate) as in mass filling etc complete all as specified and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed

Removing excavated material exc.250m but not exc 500 m & depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded (factory made)

Ditto,all as per item no 114 but without glazing bars (factory made)

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed(factory made).

M&L for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike framed guard bars and similar work conforming to Fe 290, Gde - E-165.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required all as specified.

Fixing with welding only in repairs n. exc 2.5cm in length & n. exc 6mm thickness of metal existing sliding door bolt / tower bolt / handle of any size & material by welding M/C at any location complete all as specified and directed by Engineer-in-Charge.

Fixing with running welding in repair of ms hinges, helical door springs, rolling shutter spare parts heavy MS garrage doors etc. thickness of material n. exc. 6mm complete all as specified and as directed.

Supply and fixing in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished

Supply and fixing in repair ,4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing complete.

Material and labour for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of following capacity.

(a) Exc 250 Ltrs but not exc 500 Ltrs

(b) Exc 500 Ltrs but not exc 1000 Ltrs

Supply and fixing in repair PVC over tank cover of size 250 ltr upto 500 ltr capacity

Supply and fixing in repair of bib taps standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 15 mm 90gm/each

S&F as in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

Material and labour for Securing glass of any description in existing Metal/wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.

Fixing with running welding in repair of ms hinges, helical door springs, rolling shutter spare parts heavy MS garrage doors etc. thickness of material n. exc. 6mm complete all as specified and as directed.

Jyoti enterprises

Samaksh Enterprises

MS Soumya consultants and designers

CREATIVE CONSTRUCTION