COMPREHENSIVE MAINTENANCE EXTERNAL BR NATURE WORK ROOF POINTING SERVICE WATER TANK PLASTERING PLUMBING SANITARY FITTINGS AND PLINTH PROTECTION IN OFFICERS MD ACCN AT CARIAPPA VIHAR IN THE AREA OF AGE BR II UNDER GE WEST DELHI CANTT 10

Amount

Taking down cement plaster on brick work including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises and removal of rubbish beyond MOD land and M&L for 15 mm thick rendering in CM (1:6) on walls as whole or in patch of any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding complete all as specified and directed.

All as per item 1 above but M&L 15 mm thick rendering in CM 1:4 as whole or in patch on external face of walls.

M&L for preparation of new surfaces (plastered or unplastered) of walls including cornices/pillars etc. by brooming down and applying two coats of apex over a coat of primer complete all as specified and directed

M & L for preparation of new surfaces (plastered or un-plastered) of walls including cornices/pillars etc. by brooming down and applying two coats of Oil Bound Distemper over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and directed .

M&L for preparation of old surface of ceiling and applying one coat coat of Oil bound distemper on ceiling surface with brushes (two horizontal strokes immediately followed by two vertical stroke constitute one coat) complete all as specified and as directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L 40m thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on bedded in cement mortar (1:6) 15mm thick on mud phuska complete all as specified and directed.

Except brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% crude oil by weight of cement on beded in cement mortar (1:6) 15mm thick on mud phuska complete all as specified and directed .

M&L for cement concrete type 1:2:4 type B0 using 12.5mm gradedaggregate in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including demolition ofld and removal of rubbish beyond MOD land as directed

M & L flush pointing brick tiles with cement mortar 1:3 , laid flat on roof including raking out joints/ pointing to brick tiles laid flat as in floor roofs with cement mortar , etc complete all specified and directed .

M&L for preparation of old decoreated external wall surface by complete removal of existing treatment with manual scrapping tools and applying two coats of weather proofing exterior acrylic emulsion paint over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and directed.

M&L preparation of old cast iron pipe surfaces of any description and applying one coat of black japan paint, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming Fe 410-W (Gde-E-250 quality -A) including dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old GI sheets complete all as specified and directed.

M & L Preparation of new steel surfaces of any description over 10 cm in width or girth otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide or zinc chrome primer complete all as specified and as directed.

Demolition of Cement Concrete (un reinforced) in ground floors and pavings n exc 15 cm thickness including rubbish off beyond MOD land complete all as specified and directed

M&L for vitrified light coloured joint free tiles 600x600 8 to 10 mm thick (square/rectangular) polished , area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 etc including dismantaling of old and removal of rubbish beyond MOD land complete all as specified and directed.

ditto as per item No18 above but on vertical surfaces of wall over & incl CM(1:4) 10mm thick cement plaster etc. comnplete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 600x300X7 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even including dismantaling of old and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 including dismantaling of old and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment including dismantaling of old and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for 18 to 20mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing, and making hole in the platform for gas connection complete and incl nosing of the edges half round including dismantaling of old and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for Machine pressed coloured reflective type pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, including dismantaling of old paver and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 50mm thick sand cushion/sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair (75mm thick) with using extra cement complete all as specified and directed.

Supply and apply a glass fibre reinforced acrylic modified cementitious coating system.Prepration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementitious coating system as top coat over reinforcement over base coat etc supply and apply a protection plaster (12-15 mm) admixed withappropriate integral waterproofing compound @ 0.10 kg per bag of cement. The product should conforms to IS2645. Cleaning of RCC surface to remove dust, loose particles grinding any sharp edges including M&L for sealaing of pipe penetration of toilets core cutting in the following stages:- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joint to concrete complete all as specified and directed.

M&L for Cement concrete 1:5:10 type E2 (using 40mm graded aggregate) as in filling in sunken floors of toilets including Demolition of cement concrete (un-reinforced) as in sunken floors,and removing rubbish beyond MoD land complete all as specified and directed.

S&F Steel water tubing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore including cutting chases, pinning in brick wall cutting n.exc 10 cm girth and making good to facings where required and pointing in CM 1:3 including taking out old pipes complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore including taking out old pipes complete all as specified and directed. Note : The work shall be carriedout in multistories bldgs upto 7th storeys and necessary sacffolding/safety measures be taken and no extra payments will be given for the scaffolding/safety measures.

S&F in repair bib taps short body /long body 15mm bore dia cast copper alloy with crutch or fancy type handle, CP, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed .

S&F in repair angle valve 15mm bore dia cast copper alloy fancy type, screwed down, high pressure with capstain head handle, chromium plated for iron pipe or unions complete all as specificed and directed.

S&F 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed

S&F in repair brass chromium plated health faucet with 1.2 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified.

S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed.

S&F in repair 15mm bore dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs chromium plated brass overhead shower rose 125mm size swivel type with long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed .

S&F in repair 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws complete all as specified

S&F in repair brass chromium plated grating 100 mm dia with/or without waste hole, complete all as specified and directed.

S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed.

S&F in repairs PVC connection pipe of 450mm long and 15mm size with brass nuts complete all as specified and directed.

S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed.

S&F in repair vitreous padestal pattern (European type) water closet pan white with cast iron "P" or 'S" trap including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed .

S&F in repair PVC flushing cistern 10 Ltrs capacity white valveless, syphonic action type flushing cistern, low level with inlet ball valve, float and handle, including brackets and pipe complete all as specified and directed

S&F in repair vitreous china water closet pan orissa pattern long pan size 580mm x 440mm, white with integral foot rest "P" or 'S" trap front or back inlet (excluding flushing cistern and flush pipe) and removing rubbish beyond MOD land complete all as specificed and directed.

S & F in repair vitreous china wash hand basin (WHB) white, including provision of pair of mild steel angle iron bracket of suitable size duly painted, 32 mm dia chromium plated waste coupling , PVC waste pipe and cutting for pinning in ends of brackets in wall etc of size not less than 550mm x 400mm etc removing rubbish beyond MOD land complete all as specified and directed.

S & F in repairs plastic water closet seat cover white (Heavy duty), closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device suitable for existing WC complete all as specified and directed.

S&F in repair 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and finials approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.

S&F100 mm dia cast iron water socketed pipes with or without ears with lead joint laid in trenches/floors or fixed to walls including taking out old pipes complete all as specified and directed.

S&F in repair cast iron bends, elbows, Tee with or without door plate, etc of 100mm dia or diminishing pieces or tapers with lead joint (larger bore measured) complete all as specified and directed.

S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste and vent pipe in any length, with or without ears with lead joint, laid in trenches/floors or fixed to walls including taking out old pipes complete all as specified and directed.

S&F in repair cast iron bends, elbows, Tee with or without cover plate, etc of 75 mm dia or diminishing pieces or tapers with lead joint (larger bore measured) complete all as specified and directed.

S&F in repair stack clamps suitable for 100 mm bore pipe, made out of 25mm x 3mm flat iron and 16mm dia round iron stay(as per sample) including bolts and nuts, securing ends of stays to wall or roof with concrete/cement mortar (upto seven storey building) etc complete all as specified and directed.

All as per item 55 but for 75mm bore pipe.

S&F RCC slab, 1:2:4 type B1 (using 20mm graded stone aggregate ) as in cooking platform including form work , window or door cills and setting in cement mortar 1:4 on brick/concrete walls including formwork including demolation of old rcc and removal of rubbish beyond MOD land complete all as specified and directed. (Reinforcement shall be measured and paid separately).

M&L for TMT bars 10mm dia & above cut to length bent to shape required inculding cranking bending and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed.

M&L brick work built in cement mortar 1:6 using sub class 'B' bricks (old size bricks) straight or curved on plan exc 6 mtr mean radius including demolition of brick work built in Cement mortar and removing the debries beyond MoD land complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including demolition of brick work built in Cement mortar and removing the debries beyond MoD land complete all as specified and directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified.

Taking down shutters of any description exceeding 1 square metre and not exceeding 2 square metre each and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description exceeding 2 sqm each and refixing in the same opening complete all as specified and directed.

M&L Framed work such as grills,gratings, oor/window/vent /CB chowkats/kitchen cabinet supporting/window grill welded frame with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, complete all as specified and directed.

S&F flush shutter 40 mm thick solid core moulded construction with block board core and plywood face surface laminated panels covered with decorative face veneer on both face with lipping/framematch complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading etc complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) factory made door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & drawing complete all as specified and directed.

S&F FRP factory made door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour of approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specification & drawing and as directed complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100mm size extruded aluminium handle, fabricated type anodised complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern spring including roller plate complete all as specified and directed.

S&F 100 mm long (size) stainless steel butt hinges, medium weight, cold rolled complete all as specified complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200 mm long, extruded section complete all as specified and directed.

S&F for 19/20mm thick interior grade prelaminated particle board (Prelaminated on one side) as in CB shutter, lipping and necessary rebating for double shutter where required and polishing to lipping including dismantling of old boards complete all as specified.

S & F Continuous (piano) hinges, mild steel bright finished or electrogalvanised, width of flap (when open) 30 mm complete all as specified and directed.

S&F Magnet Catcher of standard size and quality as in kitchen cabinet all as specified.

S&F 40mm dia stainless steel cupboard knobs fixed with nuts, screw and washer of mild steel, bright finished, complete all as specified and directed.

S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet minimum 1 mm thick overall size 90x90x25cm including taking out old plate rack complete all as specified.

S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers including coupling and waste pipe, fixed in RCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repair stainless steel sink with drain board made out of 1.00 mm thick sheet for kitchen with plug, washers, waste including in cm to dwarf wall or including fixing cantilever, bracket and connecting union to pipe over all size 915mmx460mm bowl size 410mm x 330 mm x 160 complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L for powder coated aluminium hollow section for 3 track sliding window with window frame and two glazed shutter and one nos glazed wire gauged shutter sliding type with aluminium section weighing 0.55 Kg/mtr with 3 track for sliding window with framed shutter including aluminium alloy powder coated snap typed beads, handle aluminium glazing clips, cleats, rubber gasket etc including 4 mm thick tinted glass of superior quality and all standard fittings viz . runner, locking arrangements complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with aluminium beads in square n exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50 mm with square tube solid 6 mm thick including aluminium channel of suitable size thickness of channel 1.5 mm complete all as specified and directed.

M&L in repair for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50 mm with square tube solid 6 mm thick including aluminium channel of suitable size thickness of channel 1.5 mm complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 152650.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

Vipul Construction