Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC RZ H 5 NANDA BLOCK MAHAVIR ENCLAVE PART 1 PAL AM SOUTH WEST DELHI DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹12.6 L+₹4,777.50 (0.38%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹13.1 L+₹58,048.50 (4.62%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹16.1 L+₹3.5 L (28.2%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹16.4 L+₹3.9 L (30.9%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Subroto Park
GE AF Subroto Park c o 56 APO
CERTAIN REPAIR / REPLACEMENT OF B/R WORKS IN MD ACCN OF AREA UNDER AGE B/R OF GE AF SUBROTO PARK
2022_MES_560535_1
GE/SP/ TOKEN-40/2022-23
Open Tender
Civil Works
Item Rate
120 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE AF Subroto Park
₹40,000
Yes
10 Feb 2023
31 Oct 2022
3 Dec 2022
31 Oct 2022
26 Nov 2022
14 Nov 2022
Amount
Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed.
M&L for 75mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified.
M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge.
S&F precast machine pressed PCC interlocking paver block rubber moulded of 60 mm thickness, M-35 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1(20mm graded aggregate), 40mm thick complete all as specified.
M & L for heavy duty 20 – 22 mm thick designers coloured glossy finished cement concrete floor tiles of size (30x30cm) or next higher size and design as approved set and jointed in neat cement slurry laid over cement screed complete all as specified
M & L for screed bedding 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1: 6 even and fair complete all as specified .
Dismantling roof sheets / wall cladding etc complete all as spcified and as directed.
Dismantling structural steel work etc complete all as spcified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated/ style pattern steel sheet/Plain steel sheet 0.50mm thick fixed to steel frame with self tapping screw (as direced) with rubber washer in roofs , complete all as specified and directed by Engr-in-charge.
Supplying, fabricating and fixing cladding on steel gate / wall or other surface as per site requirement (for all height, outer/inner surface) of aluminium composite panel sheet, fire proof, mould proof, anti-static, anti bacterial, PVDF coated, material aluminium, shape rectangular, finish powder coated, for exterior use, anodised as per manufacturer's instructions and in metallic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick, mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, fixed over and including base frame fabricated with aluminium square pipe of size 25 mm x 20 mm with 1 mm wall thickness in 600 mm x 600 mm size grid including stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods etc. complete all per manufacturer instruction & complete all as directed by EIC.
Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm all as specified and directed.
M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation etc complete all as specified and directed.
S&F Joist, channel, angle, or tee sections etc. with Fe-290 (Gde E165) quality A complete all as specified.
S & F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded Squre/ Rectangular tubes conforming to IS-1161-1979 (grade st-240)all as specified and directed by Engineer - in - Charge.
S&F Mild steel plates (plain or chequered) channels, square cut or notched etc complete all as specified and directed by Engineer - in - Charge .
Taking down of double leaf steel gate and refixing on same location incl repair /replacement /welding work to holdfast,locking device etc
M&L for framed work as in doors or gates of angle or other section with gusset plates, with Fe-290 (Gde E165) quality A complete all as specified., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified.
M&L two coats synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified.
Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
M&L for vitrified double charge ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:6 complete all as specified and directed.
All as item no.21 above but in dado over 10mm thick rendering in CM 1:4
M&L for first quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.16 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, and leveling the floor with PCC 1:2:4 type B0 of required thickness if required to maintain slope etc. complete all as specified.
S&F glazed ceramic coloured tiles in vertical surface 450mmx 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar 1:4 complete all as spd and directed
Demolition of brick work built in cement mortar including all quains, arches, pillers etc and removing debries out site MOD land complete all as speified and directed .
M&L for brick work with sub class B bricks of old size built in cement mortar 1:4 straight or curved on plan exceeding 6m mean radius all as specified and directed
M&L for dismantling loose concrete cover of RCC slab, columns, beams, chajjas, balconies, stair case and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces with rust removers of SIKKA rustoff 100 applied in two coats @ 0.15 Kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry including S&F welded fabric GI wire mesh or wire, size not less than 75mmx75mm and 3.00 mm dia as reinforcement to concrete. After placing the additional reinforcement, all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allowed to dry. To this surface, apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of Ordinary Portland Cement, 53 Grade and 2 parts of Ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sqcm by guniting machine and surfaces finished even and fair including necessary padding, shuttering/form work etc Notes:- Work to be executed for upto two storey buildings and in Patch work.
Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and directed
M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement all as specified.
M & L for 15 mm thick cement plaster in cement mortar 1 : 6 on fair faces of brick or concrete surfaces including finished even and smooth without using extra cement all as specified.
All as per Item No 30 above but 10 mm thick in cement mortar 1 : 3 in ceiling, all as specified.
M/L for preparation of new plastered surface of walls and applying two coats of OBD over chalk whitening complete all as specified and directed.
M&L for preparation of newly plastered or unplaster surface and applying two coats of white wash on ceiling, all as specified.
M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of cement base paint over a coat of lime wash complete all as specified and directed.
M&L for preparation of newly plastered or concrete surfaces of wall and applying two coats of exterior weather proof emulsion paint complete.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and remove the debris outside from MOD land complete all as specified and directed.
S & F precast factory made polycrete (SFRC) Medium duty main hole covers 80 mm thick rectangle in shape upto 0.60 sqm area for main hole with at least 5 cm bearing each side complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforcement cement concrete (1:2:4) type B-1 using 20mm graded aggregate in man holes covers slabs/ Shelves as in slabs supported on walls, beams and columns, in floors, roofs, landings, deck slabs and in shelves and like including necessary form work, complete all as specified and directed by Engr-in-Charge.all as specified.
M/L for TMT mild steel bars of 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.
S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and directed.
S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and directed.
S&F in repair 5mm thick glass sheet front shelf 12 mm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.
S&F in repair 5 mm thick glass corner with 12" dia with steel railing and fixed with CP screw & cup washer on wall complete all as specified and directed.
Material and labour for removal of existing treatment completely on walls an preparing the surface for applying 2mm thick Birla white putty on entire surfaces to obtain/ achieve smooth even surfaces with using sand paper and applying one coat of primer and applying Two or more coats of 100% Premium acrylic emulsion paint (Make-Asian Royale shyne paint) complete all as specified and directed by Einginner-in-charge
M&L complete removal and scraping of existing treatment of walls and applying one coats of oil bound distemper over a coat of primer all as specified and directed
M&L complete removal and scraping of existing treatment on ceilling and applying one coats of oil bound distemper over a coat of primer all as specified and directed
M & L complete removal and scraping of existing treatment of walls and applying two coats of exterior weather proof emulsion paint complete.
M & L complete removal and scraping of existing treatment, as preparation of old decorated surface of walls and applying two coats of cement based paint complete.
M&L preparation of old plastered surface of walls/ceiling and applying 1 mm thick wall care putty complete.
M & L for preparation of old painted wooden/steel/concrete surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete.
Demolition of RCC precast jalli of any thickness, complete all as specified.
M&L for providing precast cement concrete louvers and jallies , 35 mm thick including all mouldings type B-0 1:2:4 ( 12.5 mm graded stone aggregate) set in CM 1: 6 complete all as specified and directed.
M & L for PCC 1 : 2 : 4 type B - 1 (Using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges coping benching etc including like weathering, slightly rounded or chamfered angles and throating complete.
M&L in repair 18-20mm thick granite ( of any type) work (table rubbed and polished ) in cooking plateform, shelves and the like, over and including 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including taking out the old broken stone complete all as specified and directed.
S&F in repairs Wash basins, vitreous china, white, Ovel type/flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets complete all as specified and directed.
Supply and fix in repair Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), including connection to wate pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed by Engineer - in -Charge.
S&F in repairs Plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.
S&F in repairs CP paper holder. complete all as specified and directed.
S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
S & F in repair Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore complete.
S & F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified.
S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.
S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs Chromium plated brass shower rose 125 mm sizewith or witout swivel joints including fxing with 15 mm bore pipe, fixed in repairs, complete all as specified.
Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each complete all as specified and directed.
Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description not exc. 1.50 Sqm each complete all as specified and directed.
Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size 105x60mm incl frame backfilling with PCC 1:3:6 complete all as specified and directed
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., , size 165x60mm incl frame backfilling with PCC 1:3:6 complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed.
S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture .18mm complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification & drawing complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Chennel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gep insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete as specified and as directed.
S&F Butt hinges, medium wt, cold rolled, mild steel of size 100mm complete all as specified and as directed.
S&F 125 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 mm size aluminium handle, cast type anodized complete all as specified and as directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.
S& F in repair Aluminium door cill strip Approx length 1m; colour black, shape rectangular, brush type polypropylene, water resistant to seal the gap between door and floor fixed with screw/nail, complete all as specified and directed .
Dismantling un serviceable water tanks any description exc 500 but not exc 1000 Litres complete all as specified and as directed by the Engineer-in-Charge
All as per item No 84 above but 250 but not exc 500 Litres.
S&F for 1000 Litres capacity rotational moulded polyethylene water storage tanks, triple layers (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by the Engineer-in-Charge
All as per item No 86 above but 250 but not exc 500 Litres capacity.
Taking down aluminium door shutter of any size upto 4 Sqm each and replacement of defecting pivot with new pivot & refixing in position complete all as specified and directed by Engineer-in-Charge.
Taking down aluminium door shutters of any size upto 4 Sqm each replacement of defecting floor spring with new floor spring
S&F in repair dead lock 6 lever brass for aluminium door shutter complete all as specified and directed by Engineer-in-Charge.
Taking down old broken prelaminated board/glass from aluminium door, window or partition panel by removing glass clips and fixed prelaminated board/Glass in any size and refixing the glass clips in position after replacing rubber gasket complete all as specified and directed by Engineer-in-Charge. Note :- Glass and pre laminated board will be measured and paid separately.
S&F 12 mm thick prelaminated board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work complete.all as specified and directed by Engineer - in - Charge .
S&F in repair Hydraulic door closer for aluminium door shutter complete all as specified and directed by Engineer-in-Charge.
Taking down old steel /wooden windows with hold fast & making good surface and S&F windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series).complete all as specified and as directed. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only.
MAHABIR SINGH
shakti construction
JAIPAL AND BROTHERS
J D ENTERPRISES
Ashish Sehgal and Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .