COMPREHENSIVE REPAIR WORKS TO FEME FEMT OFFRS MESS JCOS MESS AND VI MESS IN ZONE I AREA UNDER GE MCEME SECUNDERABAD

Amount

Taking down cement plaster from brick or concrete wall surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and as directed.

M&L rendering 15 mm thk on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement.

M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering in cement morter 1:3on ceiling, finished even & fair complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new plastered surfaces of any description and applying two coats of oil emulsion distemper over a coat of wall putty on wall and chalk whiting prepara-tory to distempering and as directed.

M&L preparation of new plastered surfaces of ceiling any description and applying three coats of white wash and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles)and as directed.

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including scread bed or bedding layer 15mm thick in CM 1:6 all as specified.

M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm) and as directed.

M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.36 sqm in Skirting/dado including 10mm thick CM (1:4) backing coat complete all as specified and directed.

M & L non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding .11Sqm but n.exc .18Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:6.and as directed.

M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick joint free in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 etc.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished all as directed

Ditto- all as per item No 15 above but exc 1.5 sqm and n exc 4 sqm each all as directed and as directed.

M&L for powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Sheet glass, 4.80 mm ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as directed

S&F in repair aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed approved by Engr-in-Charge

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty approved by Engr-in-Charge

M&L Disconnecting existing tanks exc 250 and n.exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) and as directed.

do all as Item No. 22 above but exc 500 and n.exc 1000 litres and as directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc capacity exc 250 and n.exc 500 litres all as directed by Engr-in-Charge

do all as per Item No. 24 above but exc 500 and n.exc 1000 litres and as directed.

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity) and as directed.

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap)

S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in postion all as directed by Engg-in-Charge

-Ditto- All as per above but 1000 ltr capacity.and as directed.

S&F in repair CP bib taps 15 mm dia of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and as directed.

S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed and as directed.

S&F in repair WHB mixer 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed and as directed.

S&F in repair stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union.

Ditto- all as per item No 33 above but 20 mm dia.

S&Fin repair vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with integral foot rest and making good to the floor complete.

S&Fin repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete.

S&F in repairs Vitreous china urinals with urinal spreader, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal all as directed back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)etc.

S&F in repairs Vitreous china sensor type urinals with urinal spreader, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing etc all as directed

S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end all as directed

S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long fixed in repairs all as directed

S&F in repair CP grating(with & without hole) for Nahani trap and floor trap of size 100 mm dia all as directed

Cutting chases for concealed water tubing etc and making good in CM cutting exc 10 cm but not exc 20 cm girth in stone, concrete block or slab walls all as directed

S&F in repair CP swivel shower rose with arm 195mm long with bend of 45 degree with flange of any colour all as directed

S&F in repair PVC ball valve 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) and as directed.

--Ditto-- as in item No 46 above but 20mm dia and as directed.

S & F in repair Vitreous china wash down water closet pan(Pedestal pattern), white (EWC)with necessary P/S Trap and fixed in repairs including jet spray and seat cover all as directed

S & F in repair CP brass Towel rail 20mm dia, D type, 60 cm long complete fixed in wall with screws in repairs all as directed

S&F in repairs CP soap dish, any type, fixed to plugs with chromium plated brass screwsall as directed

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)all as directed

S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws all as directed

S&F in repair PVC acrylic shelf for WHB 450 mm long all as directed

S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete and as directed.

S&F in repair bathroom mirror cabinet, all as directed by Engg-in- Charge all as directed

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm dia bore Note-hindware Cat no. F330020 or equivalent and as directed.

S&F in repair two way angle valve for fixing in 15mm dia bore all as specified and directed.

S&F in repair Health Faucet for EWC all as specified and directed Note- Hindware Cat no. F160027 or equivalent all as directed

Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-

(a) 15 mm bore

(b) 20 mm bore

S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-

(a) 15 mm bore

(b) 20 mm bore

Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-

(a) 15 mm bore

(b) 20 mm bore

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Hacking out old broken glass of any thickness size,quality or description from any type of frames and S&F 3mm thick sheet glazing in square n.exc 0.5 sqm ordinary quality with glazing clips and oil putty complete as directed by EIC.

Demoiliton of stone slabs and tiles of any description or thickness in foors, aprons etc and as directed.

M&L Granite (of any type) tile 16 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid on complete all as directed by Engr-in-charge

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and as directed.

M&L for 75 mm thick Cement concrete 1:2:4 Type B1 using 40mm graded stone aggregate as in flooring or mass concrete complete all as specified and as directed by the Engineer in Charge.

M&L for crushed sand filling under floors or in foundations including watered and consolidation complete all as specfied and directed

M&Lfor Machine pressed precast concrete inter locking paver blocks of any shape and size conforming to IS 15658- 2006 of 60 mm thick M-35 grade with grey cement and pigment and including removing the existing paver blocks including removing of debries out side MD land complete all as specified and directed..

VACON INFRASTRUCTURES (BID ID -3305789)

Vara Enterprises (BID ID -3306552)

NEWS CONSTRUCTIONS (BID ID -3306437)

ATUL ENTERPRISES (BID ID -3305040)

PARDEEP AND CO (BID ID -3306381)

Squad 7 Projects and Services Pvt Ltd (BID ID -3303686)