Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 CrAccepted-Finance | ₹14.3 Cr | L1 | Accepted-Finance OK |
| 2 | L2₹17.2 CrAccepted-Finance | ₹17.2 Cr | L2 | Accepted-Finance OK |
| 3 | L3₹27.6 CrAccepted-Finance 13TH FLOOR DN18 SALTEE TECH PARK SECTOR V SALT LAKE BIDHAN NAGAR KOLKATA 700091 | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | ₹27.6 Cr | L3 | Accepted-Finance OK |
Tender Value
Refer Docs
EMD Value
₹18.3 L
Closing Date
17 Feb 2021, 5:00 pmClosed
SE ETC NOIDA
220 KV SUB STATION SECTOR-20 NOIDA
Construction of 220kV LILO line on ACSR Zebra conductor including designing, prototype testing, type testing, manufacturing, supply and erection of 220kV DC NBT and 2X400kV plus 2X220kV MC NBT for 220kV SS Jewar under ETD-II Noida
2020_UPTCL_541575_1
E-T-48/ETCN/2020-21
Open Tender
Electrical Works
150 days
NOIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹29,500
EE ETD NOIDA
₹18.3 L
24 Feb 2021
28 Dec 2020
18 Feb 2021
28 Dec 2020
17 Feb 2021
28 Dec 2020
28 Dec 2020 - 8 Feb 2021
Amount
Part-A (Design and Type Test for Wind Zone-5)
Design and Engineering (as per IS/IEC) of 220 kV Double Circuit Narrow Base Towers and respective foundations along with all tower accessories suitable for single ACSR Zebra conductor along with all extensions covered under this tender (Base of each towers shall be maximum 5 meter x 5 meter, Bottom cross arm of each towers shall be 19 meter) (complete in all respect) for Wind Zone-5 duly approved from CPRI / IIT (Mumbai, Delhi, Roorkee, Khadagpur, Chennai, Kanpur)
DA(0-2 Degree) Tower, +3 meter Extension DB(2-30 Degree) Tower, +3 meter Extension DC(30-60 Degree) Tower, +3 meter Extension DD(60-90 Degree) Tower, +3 meter Extension
Type Testing (as per IS/IEC) of 220 kV Double Circuit Narrow Base Towers suitable for single ACSR Zebra conductor along with extension covered under this tender (complete in all respect) for Wind Zone-5 as per design at sl. no. 1.1 above
DA(0-2 Degree) Tower with +3 meter Extension
DB(2-30 Degree) Tower with +3 meter Extension
DC(30-60 Degree) Tower with +3 meter Extension
DD(60-90 Degree) Tower with +3 meter Extension
Design and Engineering (as per IS/IEC) of 2x400 kV (on twin HTLS whose current carrying capacity equivalent to ACSR Quad Moose) + 2X220 kV (on single ACSR Zebra) Multi Circuit Narrow Base Towers and respective foundations along with all tower accessories along with all extensions covered under this tender (Base of each towers shall be maximum 7 meter x 7 meter, Bottom cross arm of each towers shall be 19 meter) (complete in all respect) for Wind Zone-5 duly approved from CPRI / IIT (Mumbai, Delhi, Roorkee, Khadagpur, Chennai, Kanpur)
MB(2-15 Degree) Tower MC(15-30 Degree) Tower MD(30-60 Degree) Tower
Type Testing (as per IS/IEC) of 2x400 kV (on twin HTLS whose current carrying capacity equivalent to ACSR Quad Moose) + 2X220 kV (on single ACSR Zebra) Multi Circuit Narrow Base Towers along with extension covered under this tender (complete in all respect) for Wind Zone-5 as per design at sl. no. 1.3 above
MB(2-15 Degree) Tower
MC(15-30 Degree) Tower
MD(30-60 Degree) Tower
Part-B (Supply)
Fabrication, galvanizing, inspection and supply of 220 kV Double Circuit Narrow Base Towers (HT & MS Structure) (suitable for single ACSR Zebra conductor) including stubs, extension and stub-setting templates, hot dip galvanized, hexagon round hexagon head transmission tower bolts nuts, washers, spring washer, step solts etc. as per designs, drawings & BOM at sl. no. 1.1 above
DA(0-2 Degree) Tower with +3 meter Extension
DB(2-30 Degree) Tower
DB(2-30 Degree) Tower with +3 meter Extension
DC(30-60 Degree) Tower
DC(30-60 Degree) Tower with +3 meter Extension
DD(60-90 Degree) Tower with +3 meter Extension
Fabrication, galvanizing, inspection and supply of 2x400 kV (on twin HTLS whose current carrying capacity equivalent to ACSR Quad Moose) + 2X220 kV (on single ACSR Zebra) Multi Circuit Narrow Base Towers (HT & MS Structure) including stubs, extension and stub-setting templates, hot dip galvanized, hexagon round hexagon head transmission tower bolts nuts, washers, spring washer, step solts etc. as per designs, drawings & BOM at sl. no. 1.3 above
MB(2-15 Degree) Tower
MC(15-30 Degree) Tower
MD(30-60 Degree) Tower
Fabrication, galvanizing, inspection and supply of gantry structure including bolts nuts, washers etc. complete as per UPPTCL duly adopted designs, drawings & BOM
MS Structure (each set consist of 3 colums and 2 beams)
TOWER ACCESSORIES
Number Plate
Danger Plate
Phase Plate in sets of Red, Blue and Yellow for Tension towers
Bird Guard
Pipe type earthing material
INSULATOR
120 KN Polymer Strings
160 KN Polymer Strings
HARDWARES SUITABLE FOR SINGLE ZEBRA ACSR
Single Suspension Fitting
Single Tension Fitting
Single Suspension Pilot Fitting
Double Suspension Fitting
Double Tension Fitting
48 Fibre OPGW
48 Fibre (DWSM) OPGW Fibre Optic Cable
Supply & Installation of Hardware set for 48 Fibre OPGW*
Joint Box (48 Fibre)
FODP 96F
48 Fibre Optic Approach Cable
Fibre Optic Approach Cable for 48 F OPGW
Supply & Installation of hardware’ set for 48 Fibre (DWSM, G.652D) Fibre Optic Approach Cable*
Part-C (Work)
Survey including preparation of schedule of materials, marking of locations (Route length), GPS Survey of line with co-ordinates of each tower(The length of line shall be authenticated by GPS Survey)
Check survey
Foundation of 220 kV Double Circuit Narrow Base Towers including cost of excavation of tower foundation pits including all earth work, backfilling, levelling etc., setting of stubs including all foundation work, cost of concreting with cost of cement, dewatering, shoring and shuttering, forming, curing, cost of reinforcement bars, installation of steel reinforcement bars with cutting, bending, placing, binding etc. to compete the work in all respect as per designs, drawings & BOM at sl. no. 1.1 above
DA(0-2 Degree) Tower with +3 meter Extension
DB(2-30 Degree) Tower
DB(2-30 Degree) Tower with +3 meter Extension
DC(30-60 Degree) Tower
DC(30-60 Degree) Tower with +3 meter Extension
DD(60-90 Degree) Tower with +3 meter Extension
Foundation of 2x400 kV (on twin HTLS whose current carrying capacity equivalent to ACSR Quad Moose) + 2X220 kV (on single ACSR Zebra) Multi Circuit Narrow Base Towers including cost of excavation of tower foundation pits including all earth work, backfilling, levelling etc., setting of stubs including all foundation work, cost of concreting with cost of cement, dewatering, shoring and shuttering, forming, curing, cost of reinforcement bars, installation of steel reinforcement bars with cutting, bending, placing, binding etc. to compete the work in all respect as per designs, drawings & BOM at sl. no. 1.3 above
MB(2-15 Degree) Tower
MC(15-30 Degree) Tower
MD(30-60 Degree) Tower
Erection of Superstructure of 220 kV Double Circuit Narrow Base Towers (HT & MS Structure) and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger number, phase plates, bird guard with fixing & punching etc. as per designs, drawings & BOM at sl. no. 1.1 above
DA(0-2 Degree) Tower with +3 meter Extension
DB(2-30 Degree) Tower
DB(2-30 Degree) Tower with +3 meter Extension
DC(30-60 Degree) Tower
DC(30-60 Degree) Tower with +3 meter Extension
DD(60-90 Degree) Tower with +3 meter Extension
Erection of Superstructure of 2x400 kV + 2X220 kV Multi Circuit Narrow Base Towers (HT & MS Structure) and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger number, phase plates, bird guard with fixing & punching etc. as per designs, drawings & BOM at sl. no. 1.3 above
MB(2-15 Degree) Tower
MC(15-30 Degree) Tower
MD(30-60 Degree) Tower
Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200 seperatiion of minimum 10 mm thickness with 10mm/12 mm electrode & application of Zinc rich Aluminium paint on the affected surface including cost of all material including tack welding of Anchor towers.
Laying, stringing, tensioning clamping, jointing etc of Single ‘ZEBRA’ ACSR conductor including hoisting of insulators, fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dampers etc.on all Six phases of 220 KV DC lines
Laying, stringing, tensioning, clamping, jointing, including fittings of all necessary hardware and accessories of OPGW & OFAC, termaination at S/s, end to end connectivity & testing etc on 220 KV lines
Grounding work including earth work etc for pipe type grounding including cost of coke & salt.
Construction of ramps & preparation of base plateform with morum/stone dust/earth for work of foundation and erection
Preparation of documents for the approval of PTCC as per final survey and approved route of 220 kV LILO line. The scope of work also includes getting PTCC approval from the competant authority before charging of line .
SALASAR TECHNO ENGINEERING LIMITED
Bajaj Electricals Limited
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid