Special repair works to the existing old Special Camp Building at Cheyyar in Thiruvannamalai District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

24 : Manufacturing & supply of steel windows (Weight basis)

30 : Ellispattern

39 : M.s Grills

41 : Painting - New "iron work"

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

Electrical arrangements 69 : 15 Amp. Power plug

73.2 : 4 way - D.B.

74 : Charges for fixing of "Fan"

ANNEXURE-I 2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

6.5.1 : Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement

9.5.1 : Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 3/4" x 4 1/4"x 2 3/4") (using crushed stone sand) with admixture b. In First Floor

18.1 : Formwork using M.S.Sheet c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxing, fin projection and other similar works.

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) with plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) with plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) with plasticizer

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

53.5 : Wash Hand Basin of size 550 x 400 mm

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

87.1 : Supplying and delivery of Three phase ELCB/RCCB

ANNEXURE - II A1: Supplying and fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

A2: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A3: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A4: Supplying and fixing of water tight bulk head fitting with guard suitable for 60/100 watts including necessary connections, cost of materials etc., all complete and as directed by the departmental officers.

A5: White washing two coats for old walls/ceiling using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding, thorough scrapping and washing with soap, soda water etc., all complete.

A6: Painting the old walls with two coat of approved best oil bound distemper paint int over cement plastered wall surfaces and ceiling including cost of cement paints, putty, brushes, watering, curing, etc., all complete as directed by the departmental officers (paints and its shade shall be got approved from the Executive Engineer before using)

A7: Painting two coats for old walls with ready mixed plastic emulson paint of first class quality paint of approved colour and shade over a priming coat, including thorough scrapping, clean removal of dirt and dust etc., complete including cost of necessary brushes, labour charges, patty etc., (paints and its shade shall be got approved from the Executive Engineer before using)

A8: Painting the old wood work with two coats of approved Ist class synthetic enamel paint including clean removal of old paint using sand paper as required by the departmental officers including cost of material, labour for painting, etc all complete (paints and its shade shall be got approved from the Executive Engineer before using)

A9: Painting the old Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, with relevant Standard specifications. (paints and its shade shall be got approved from the Executive Engineer before using)

A10: Dewatering and cleaning the sludge from septic tank using required skilled labour and hydraulic pumpset and cleaning away from the site etc., all complete and as directed by the depatmental officers.

A11: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

A12: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to ISI 694/1990 for Fan Point controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., all complete. (open wiring)

A13: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

A14: Supply and laying of 3.5 core 35 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

A15: Fabricating, supplying, sectioning of PPGI sheet for the specifications. The materials should be PPGI file profile with a blue colour or any other approved design 0.56mm thick 24 gauge having width 1050mm.

A16: Pointing the top of roof for hydraulic pressed tiles as pointed neatly with the cement mortar 1:3 (One of cement and three of crushed stone sand) mixed with Water proofing compound as per standard specifications etc., all complete and as directed by the departmental officers.

A17: Supplying and fixing 3 Nos. 63Amps 500 volts porcelain fuse unit

A18: Supplying and fixing of stainless steel mosquito net with aluminium frame with necessary tools and labour etc., all complete and as directed by the departmental officers.

A19: Rectification of window grills, grill doors with necessary materials including tools and labour charges etc., all complete and as directed by the departmental officers.

A20: Supply and delivery 3 HP Submersible pumpset suitable for 150mm dia borewell as per IS 8034/2022 etc., lpm x m - 50 x 60 etc., all complete and as directed by the departmental officers.

A21: Supplying and delivery 5 HP MODEL CSM 4 openwell submersible motor for the existing well with necessary materials etc., all complete and as directed by the departmental officers.

A22: Labour charges for the erection of submersible pumpset inside borewell/open well for including fixing and jointing submersible cable with proper clamps upto starter to required depth. Upto 5HP

A23: Supplying and fixing of 3 Phase panel board including labour charges, fixing and jointing submersible cable with proper clamps etc., all complete and as directed by the departmental officers.

A24: Supply and delivery of 3 core 4.0 sqmm 1100V grade copper UG flat cable of best and approved quality having ISI mark etc., all complete as directed by the departmental officers.

A25: Drilling of 6" dia (150mm) vertical bore well in Overburden soil including labour charges for insertion of casing pipe in the scheme area to required depth and as directed by the departmental officers .

A26: Drilling of 6" dia (150mm) vertical bore in hard rock areas anywhere in Tamil Nadu including transportation to the work site in hard rock areas and developing the borewells and as directed by the departmental officers. i) Upto 150m

ii) 151m to 180m

iii) 181m to 210m

iv) 211m to 240m

A27: Supply, delivery and fixing of 160mm dia outer dia PVC casing pipe of 6kg/cm.Sq of approved quality with ISI mark.

A28: Supplying and fixing of 160mm dia PVC end cap for borewell of approved quality with ISI mark.

A29: Supplying and delivery of 32mm dia UPVC Column pipe cristal coupler type, screen pipe of best approved quality to suitable for suction, air pipe for the borewell including necessary threaded couplers etc., as directed by the departmental officers.

A30: Clearing the light jungle including removal of rubbish outside the periphery of the area cleared including machines, tools and labour charges etc, complete and as directed by the departmental officers.

R.SURESH BABU

arivumani constructions

SSV DEVELOPERS