ADDN ALTN TO FLYPROOF OF WINDOWS DOORS KITCHEN SLAB KITCHEN SINK PLATE RACK WASH HAND BASIN FLOOR AND CONNECTED ITEMS IN BLOCK NO P4 S S P 5 S S P 7 S S P 8 S S AT SUBRAMANIAN LINE FODDER LINE IN THE AREA OF AGE BR II UNDER GE WE

Amount

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium three track window, shutter (Size 45X15mm) i.e. two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section confirming section Cat No 20814 (From jindal) and frame (Chowkhat) size 101.60X44.45X1.90mm thick etc including all necessary locking arrangement complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium partly fixed and partly sliding shutter (Size 45X15mm) three track window, two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section confirming section Cat No 20814 (From jindal) complete size of section (92.00X45.5) and frame (Chowkhat) size 101.60X44.45X1.90mm thick etc including all necessary locking arrangement complete all as specified and directed.

M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately against respective items.

S&F powder coated anodised aluminium frame for window with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section, coolers etc complete drilled for fixing of steel sheeting or other covering. confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed. (Butt hinges shall be measured and paid for separately)

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, bed plate, hold fasts etc complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling course complete all as specified and directed.

Raking out joints and flush pointing in cement mortar 1:3 to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and directed.

S&F 35 mm thick glazed skelton shutter IInd class hard wood rebated and prepared to received glass, gauge etc (with sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, comercial type on both sides complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in sqr n exc 0.5 sqm in each pane fixed in bottom two pane in windows etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width or aperture1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on wooden surfaces of girth exc 10CM, including preparation of surfaces. complete all as specified and directed.

S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm, mild steel ordinary rat tail rod pattern springs includng roller and roller plate complete incl necessary welding if required complete all as specified and directed.

S&F butt hinges 100mm long medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F stainless steel kitchen plate rack 0.8 mm thick four shelves made out of stainless steel sheet over all size 600 mm x 750 mm x 250 mm fixed to wall with rawl plug complete all as specificed and directed.

S&F sinks made of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550X400mm including pedestal but excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F 32mm dia CP waste coupling suitable for wash hand basin and kitchen sink complete all as specified and directed.

S&F 32mm dia and 90 cm long PVC waste pipe for WHB and sink complete all as specified and directed.

S&F 15mm dia Pillar taps, cast copper alloy, with capstan heads fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore bib taps standard of CP fancy type long body high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore dia stop valves/angle valve cast copper alloys, screwed down high pressure but fancy type chromium plated with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L Cutting holes into brick walls built in cement mortar superficial area n exc 150 sqcms and making good in CM 1:3 or cement concrete 1:2:4 type B1,complete all as specified and directed.

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

S&F salt glazed stone were gully traps size 150 x 150mm square & round mouthed trap P etc complete all as specified and directed.

M&L for Factory made RCC GT Cover of Size 400mm x 500mmx 50mm thick with 01 No handle and 150mm dia notch at one side of cover at center at 500mm long side.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L for Brick work with sub class B bricks straight or curved on plain to any radius in half brick thick wall built in CM 1:6 etc complete all as specified and directed.

Demolition of reinforced cement concrete as in chajja, kitchen slab, chullah hood, chimney portion, manhole cover and similar work n.exc 15cm thick and removal of rubbish beyond MOD land complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concerete all as specified and directed.

M&L for reinforced cement concrete using type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

M&L for TMT bars 8mm dia and over upto 10mm dia cut to length,bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed of 20mm thick in CM (1:4) including rubbing and polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round (Stone slab shall fixed as in one piece) complete all as specified and directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc on walls and ceiling.

M&L 15 mm thick rendering in cm 1:6 internal face of wall finished fair even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L preparation of surfaces and applying two coat of cement base paint over a coat of primer on external surfaces all as specified and directed.

M&L 5mm thick rendering of ready mix mortar of approved make (having ratio equivalent to CM (1:3) of ceiling surface finished fair even and smooth without using extra cement as whole or in patch including taking down and two coat white wash over a coat complete all as specificed and directed.

S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm PVC pipe in any length with or without ears with connecting joints laid in trenches or in floor from GT to 1st manhole complete all as specified and directed.

S&F 75 mm stack clamp out of 50 mm by 5mm flat iron and 16mm dia round iron stamp incl bolts and nuts and securing ends of stamp to walls or roof.

S&F 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 40mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed.

M&L for Hard core, broken to gauge n exc 63mm using broken stone boulders complete all as specified and directed.

M&L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment over and incl 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 60mm thick coloured & reflective type cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade complete all as specified and as directed.

M&L Glazed ceramic tiles 300 x 600 x7mm vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including rendering 10mm thick backing coat in CM 1:4 including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 400mm x 400mm, 6 to 7mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 600mm x 600mm, 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 79200.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/S Yamin

A V ASSOCIATES

tomar and associates

M/S Ayub Khan

M/s M M BAHL

Chandramauli Engineers Pvt. Ltd.

M/S Parmod Johar

GENIMAA PRIVATE LIMITED