Special repair to bathroom and drainage at Charri Camp , Bharatpur Lines and 33 Mtn Bde camp at Military Station Dharamshala

Amount

M&L for demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed

M&L for Walling of random rubble, uncoursed well bonded, solidly hearted and built in CM 1:4 complete all as specified.

All as per item No 02 above but except stones complete all as specified.

M&L for Walling of random rubble, uncoursed well bonded, solidly hearted and built in CM 1:6 complete all as specified.

All as per item No 04 above but except stones complete all as specified.

Brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 complete all as specified.

Chequered cement concrete tiles machine pressed of size 20cmx 20cmx 25mm thick with grey cement, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 15mm thick screed bed in cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm thick PCC 1:3:6 type-C2 complete, all as specified.

Cleaning/ clearing of manhole including inlet/outlet chambers, etc of any capacity up to 1.50 mtr depth, including disposal of Sludge/ waste up to 50m by manually or technically and burying the same in a pit (including excavation) and covering the sludge pit with soil, complete all as specified and directed by the Engr-in-Charge.

Cleaning of drain pipe of 150mm bore, in horizontal or vertical posotion by rodding from manhole and upto septic tanks, well flushing after taking off existing manhole covers, taking out sludge and other materials causing blocking of the drain pipes, burrying the sludge / night soil waste in earth pits including excavation of pits, carriage and levelling of soil pits after burrying and covering of sludge with minimum 25cm thick compacted layer of soil and removal of surplus soil, to a distance n.exc. 50m,complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick cement plaster in cement mortar (1:4) on stone masonry surfaces of wall and finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in coping / benching etc including necessary formwork / moulds complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified.

M&L for PCC 1:3:6 Type C2 (40 mm graded aggregate) in surface channels and in bed of drains complete all as spd & directed

PCC M-10, nominal mix, typeC-2, using 40 mm graded mechanically crushed stone aggregate as in floor, 75mm thick, finished even and smooth without using extra cement complete all as specified.

Mild steel TMT bars 6 to 8mm dia, cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Demolition of cement concrete (reinforced) if any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20 mm graded agg) in cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but not exc. 4.0 Sqm each all as specified.

Refixing in Chowkats or frames exc 1.5 but not exc 4.0 sqm same opening (without taking off shutters from frames) all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed by Engineer-in-Charge. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent for top rail, lock rail & battom rail on either side & as gap insert for top rail & bottom rail: Panelling of wood grain printed PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on page No. 156 of MES SSR Part-II 2010, all as specified.

S&F 100mm butt hinges cast brass with mild steel hinge pin, bright polished and fixed type B-11 all as specified.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified.

S&F 150mm long aluminium handles, cast type, anodised all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. any description all as specified.

Demolition of stone slabs and tiles of any description or thickness in any position complete.

M&L for rendering 10mm thick cement plaster in cement mortar 1:6 on brick masonry surfaces or surface other than fair face of brickwork and surface finished even and smooth without using extra cement, all as specified

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick masonry surfaces or surface other than fair face of brickwork and surface finished even and smooth without using extra cement, all as specified

Complete removal of existing treatment of walls external /internal i.e complete removal of white wash distemper surfaces etc all as specified and driected by Engr in Charge.

M & L for preparing new plastered suraces of walls and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work /complete removed existing treatment surfaces etc all as specified and directed . Make-:Asian paint:Appcolite premuim emulsion or equivalent as approved by Engeer-in-Charge.

Preparation of surfaces plastered or unplaster washing, rubbing down and stopping of distempered and painted surfaces and Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/lits and UV resistances dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @1.43 ltrs/10sqm over and including priming coat of exterior primer applied @ 0.90ltr/10sqm over new surfaces /completely removed existing treatment surfaces all as specified. Make-:Asian paint:Apex Ultima or Berger weather coat long life-7 or equivalent as approved by Engeer-in-Charge.

M&L for glazed ceramic tiles, Premium class I grade, coloured of size 450x350, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding layer in cement mortar 1:4 on surfaces of walls complete, all as specified.

Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete, all as specified.

M&L for 25mm thick PCC M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in floors, finished even and rough to receive floor finishes, complete, all as specified.

M&L for mat finish (non skid), Premium class I grade, coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

Taking down chowkats with shutters (without taking off shutters from the frames) of any description not exc. 1.5 Sqm each all as specified.

S &F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing withoil putty insquare n. exc 0.50 sqm in each pane complete all as specified and directed.

S&F Vitreous China wash basin, angle back, size 600x480mm white, including cutting for and pinning in ends of brackets or erecting stand including 15mm pillar taps, with 32mm chromium plated waste coupling, waste pipe of bore 32mm, PVC connection pipe 450mm long with brass nuts on both side, fixed in repairs, including bracket,s completed all as specified. Makes : Cat Part No 2071 of CERA or equivalent as approved by Engineer-in- Charge.

S&F bowl type or half pattern basin (355x345x535mm) only including connections to flushing pipe and outgoing pipes fixed in repair completed all as specified. Makes : Cat Part No URS-WHT-13261 or equivalent as approved by Engineer-in- Charge.

Supply & fixing Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, white, with Cast iron ‘P’ or ‘S’ trap, front or back inlet, integral footrest complete all as specified, excluding flushing cistern and flush pipe), etc and making good to floors in repair, all as specified. Makes : Cat Part No 2602 of CERA orequivalent as approved by Engineer-in- Charge.

S&F PVC valve less, crystal white, syphonic action type flushing cistern 10 liter capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450 mm ling PVC connection with CP brass coupling nuts and PVC washers at bothy ends fixed, in repairs, all as specified.

M & L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tenches or in floor all as specified.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in tenches or in floor all as specified.

S & F PVC (SWR) vent cowl all as specified.

S &F PVC (SWR) reducers (110 to 75mm) all as specified.

S & F PVC (SWR) bends 75mm all as specified.

S & F PVC (SWR) Bends 110mm all as specified.

S &F 110mm PVC (SWR) branch pieace double (dobule Y) equal or unequal all as specified.

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store upto 20 mm bore tubing,complete all as specified and directed by Engineer-in charge.

S&F for 15mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

S&F for 20mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

Re fixing only for 15mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

Re fixing only for 20mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall complete all as specified.

S&F 15mm stop valve, cast cooper alloy, screwed shown high pressure with crutch or butterfly handle,fancy type, chromium plated, screwed both ends for iron pipe or for unions and fixed in repairs, all as specified. Makes : Cat Part No 23056 of Jaquar or equivalent as approved by Engineer-in- Charge.

S&F for bib taps, 15mm bore, cast copper alloy, fancy type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair all as specified. Makes : Cat Part No 23037 of Jaquar or equivalent as approved by Engineer-in- Charge.

S&F 150mm size chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Makes : Cat Part No 35495 of Jaquar or equivalent as approved by Engineer-in- Charge.

S&F tubular towel rail, 20mm dia, D type, 60cm long complete all as specified and directed. Makes : Cat Part No 35711 of Jaquar or equivalent as approved by Engineer-in- Charge.

Demolition of cement concrete (Unreinforced) as in roof, floors (other than ground floor), beams, staircases, landing chajjas and similar suspended work, complete all as specified and directed by Engr-in-Charge.

Complete removal of existing roof treatment such as old APP membrane, polythene film, mud phuska and the like, complete all as specified and directed by Engr-in-Charge.

Wire brushing & cleaning top surface of cement concrete including flashings and junction of parapets/ walls, complete all as specified and directed by Engr-in-Charge.

Applying a coat of cement slurry @ 3Kg/ Sqm including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

10mm thick cement plaster in cement mortar 1:4 on concrete surface of roof or terracing surface, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. (NOTE: WPC to be measured and paid separately).

Supply only liquid water proofing compound, complete all as specified and directed by Engr-in-Charge.

Applying one coat of primer conforming to IS: 3384-1986 over plastered surfaces @ 0.40 litres/Sqm of density 0.87-0.89kg/litres at 25°C and viscosity 70-160CPS ( primer shall be of same make as of memebrane), complete all as specified and directed by Engr-in-Charge.

APP (Atactic Poly-propylene polymer) modified membranes, five layered, 3mm thick weighing not less than 3.5 kg/Sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all the over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacture's instructions by authorised applicator as per manufactureres instructions, complete all as specified and directed by Engr-in-Charge.

Disconnection existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position all as specified and directed.

Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylinderical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, all as specified.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed 1100 Volt grade multi – stranded FR copper conductor cable of size 1.5sqmm drawn through and including PVC conduit 20mm dia ISI marked and all accessories totally concealed and 3mm thick new hylum sheet cover the sunken boxes, including 1.5sqmm but in green colour FR copper conductor cable for earth continuity on independant board for one light/fan point controlled by one way switch complete all as specified. Note:- All the disturbed surfaces of wall/ceiling shall be made good to match the existing wall/ceiling finishes and as directed by Engr-in-Charge.

All as per serial item No 72 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts grade 2.5 Sqmm copper conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M & L for point wiring with 2.5 Sqmm PVC insulated unsheathed 1100 Volt grade multi – stranded FRLS copper conductor cable of size 1.5sqmm drawn through and including PVC conduit 20mm dia ISI marked and all accessories totally concealed and 3mm thick new hylum sheet cover the sunken boxes, including 1.5sqmm but in green colour FRLS copper conductor cable for earth continuity on independant board for 5/15 amp switch socket combination complete all as specified. Note:- All the disturbed surfaces of wall/ceiling shall be made good to match the existing wall/ceiling finishes and as directed by Engr-in-Charge.

Taking down the existing unsv main switch /cut out/ DB,s of any type capacity /description as exisiting at site including making good the distrubed surfaces to match with the existing finishes complete all as specified.

M&L for Switch piano flush button 5 Amps complete.

M&L for socket outlet 2 in 1, 3 pin, 5/6 Amp and 15/16 Amp flush type complete.

M&L for Switch piano flush type single pole one way 15/16 Amp complete.

M&L for Switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amp flush type complete.

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply & Fix in replacement of existing unserviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way with double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/ Cooper thimble. ii) The disturbed surface shall be match with existing surface complete.

Supply & Fix in replacement of existing unserviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 4 way with double door type with 200 amp rated bus bar with magnetic locking system. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/ Cooper thimble. ii) The disturbed surface shall be match with existing surface complete.

S&F in replacement of MCB SPN 40Amp breaking capacity 10 KA complete all specified all as directed.

M&L 6 to 32 Amps MCB SP (ISI Marked) 10 KA complete all as specified.

M&L for 32 Amps MCB SP (ISI Marked) 10 KA complete all as specified.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy ultra bright LED tubelight with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing T5 or T8 tubelight with G5 lamp holders to give glare free light of capacity 18W 865 1148mm LED including neccessary electric conection with batten complete all as specified. Make: Havells Model : Crystal Glass LED Tubelight (Double Side Connection) CRYSTAL 1213T8DSTL18WLED865SGLASS or equivalent in Bajaj /WIPRO

Supply & fix in replacement of existing unserviceable batten with BOX TYPE Pre-coated CRCA body, heavy duty regaL Batten for LED tube universal batten for G13 T5 or T8 lamps including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified. Make: Havells Cat part No: REGALBATTENT5UPTO1X18DSBSWH or equivalent in Bajaj/WIPRO

S & F 1X30 watt LED Security light fitting with lamp pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses with GI pipe 1.5mtr length, clamps, nuts, bolts complete all as specified and directed by Engr-in-Charge. Make.Havells or equivalent as approved by Engineer-in-Charge

Supply & fixing metalic exhaust fans 300 mm sweep on wall with fixing metalic louvers (Iron shutter) in outer side of wall with suitable size anchor bolt. Making hole in wall, groutng and making good the disturbed surface including plaster work for exhaust fan shall be part of job at no extra cost with specially designed metal blade and making connection of exhaust fan to ceiling rose by copper flexible wire complete all as specified and as directed by the Engr-in-charge.

S&F LED lights fitting 1x18W ,220V ,AC decorative box type with driver ,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilling rose all as specified and directed.

S&F LED lights fitting mirror type with high output diffuser 2 feet ,10 watt 220 V AC decorative type with driver holder with LED lamp connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F electric water heater ,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltr ,BEE 5 star rated complete with accessories such as safety valve, thermostate ,NRV, connection piece etc complete all as specified and as directed by the Engr-in-charge.

M & L earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR part-I connected to earthing point of DBs all as all as specified or indicated including testing on completion.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular single stranded conductor size 10 Sqmm complete all as directed by Engr-in-charge.

Suply and fix house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia meduim grade, two Nos 90 degree bends. M.S. hook etc complete all as specified and directed by the Engr-in-charge.

M/s Thakur Engineers