ADDITION ALTERATION OF BLDG NO P 12 MANGO LODGE AND ADDN ALTN TO FLOOR FOR PROVIDING KOTA STONE IN LIVING OF BLDG NO P34 P20 P5 and P18 AT J and B SUB AREA SIG COY UNDER GE DANAPUR CANTT

Amount

Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundn etc n. exc 10sqm on plan and n. exc 1.5m in depth all as spd.

M&L for RCC (Nominal mix) Type B1 1:2:4 (usisng 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC (Nominal mix) Type B1 1:2:4 (usisng 20 mm graded stone aggregate) in columns pillars post etc .

M&L for RCC (Nominal mix) Type B1 1:2:4 (usisng 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, Lintels over 1.5 m span etc complete.

M&L for RCC (Nominal mix) Type B1 1:2:4 (usisng 20 mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete.

M&L for RCC (Nominal mix) Type B1 1:2:4 (usisng 20 mm graded stone aggregate) as in chajja and like complete.

Use & waste of form work to sides of rough finished surfaces of concrete foundations, footings, bases of columns, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete all as specified and as directed

Use & waste of Form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete all as specified and as directed

Use & waste of form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete all as specified and as directed

Use & waste of form work to rough finished flat surfaces as in soffits of suspended slabs such as roof slabs, landing and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm widerrough finished surface

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with & including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

Mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns , hooking ends & binding with & including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed

M&L hard core of broken bricks of gauge n. exc 63mm deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 mm in soft/loose soil complete all as specified and as directed

Removing excavated material not exceeding 50 m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises all as specified.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in vertical surface such as skirtings, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick plaster in CM 1:4 complete all as specified and as directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match including 15mm thick screed bed in CM 1:6 for laynig in floor tiles complete.

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.

M&L for glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick plaster im CM 1:4 complete all as specified and as directed

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete & cinder concrete etc. complete.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc all complete.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.

Supply only water proofing compound (liquid), ISI marked.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each all as spd.

All as per above item No 33 but exc 1.5 Sqm but n.exc. 4 Sqm each.

Taking down shutter of any description exc 1 sq. m and n exc 2 sqm each and removing to store.

Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded.

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete.

S&F for Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.

S & F for pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

S & F for pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete.

M & L for plain cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar workd including necessary form work as required complete.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid supplying & fixing in opening as per specified & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd.. Make approved by GE.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as spd.

S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 all as spd.

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as spd.

S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as spd.

S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete & S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair 18/19 mm thick Block baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F in repair continuous (piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finish complete all as specified and directed.

S&F of Ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete.

S&F in repair stainless steel designer curtain rod fancy type curten rod 20 mm dia as approved incl S&F stainless steel Brackets with knobs fancy type for stainless steel designer curtain rod 20 mm dia as approved complete.

Taking up or down steel tubing and connections including S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia including cutting /chasing in walls etc. complete all as specified and directed.

S&F in repair cast copper alloy chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete.

S&F in repair cast copper alloy chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete.

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including MS brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) Rimless single piece of size 385 X 720 X 710 mm with UF soft close slimseat cover, hinges, Duel flush cistern fitting, fixing accessories and S trap 300mm complete all as specified and directed Make : Parryware, Jaquar or equivalent

S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete. Make : Jaquar or equivalent

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete.

S&F in repair bib tap 15 mm bore cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44)

S&F in repair of stainless steel soap dish, of standard size and shape complete.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, & waste pipe incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160 mm complete.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

S&F in repair chromium plated toilet paper holder with flap complete. Make- Prayag or equivalent (Cat No BA-08)

M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI marked) complete all as specified and directed

Dismantling water tanks and removing to store of capacity exc 250 and n exc 500 ltrs all as spd.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as spd.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity all as spd.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity all as spd.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete.

S&F PVC (SWR) pipe 110mm bore single socket in any length with rubber ring joint laid in floors, trenches complete

M&L PVC (SWR) bend of 110mm dia complete all as specified

M&L PVC (SWR) vent cowl of 110mm dia complete all as specified

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete.

M&L two coat of oil bond distemper over a coat of primer on newly plastered surfaces of wall including pillars any description including preparation of surfaces etc.Complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of exterior emulsion paint white or tinted complete all as specified as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. Exc 15 cm thickness (below or above ground level)& removal of rubbish material complete all as directed by Engineer-in-charge and all as specified.

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in Sub base of floors etc. finished even & fair complete all as spd and directed.

M&L For PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate).25mm thick, as in Sub base finished even & fair complete all as directed by Engineer in charge.

M & L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6 for laying of kota stone laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

M&L Kota stone slab 20-25mm thickin riser of steps, skirting, dadoand pillar laid over cementscreed and jointed with ditto asper item including Rendering 10mm thick in cement mortar (1:4) on fair faces of brickwork or concrete sur faces

M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of wall finished. the surfaces even & smooth without using extra cement Complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling and paneling on this PVC conduit/casing caping on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes/ pressed steel box 1:6mm thick with zink coated for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

All as per item no 116 above but one bell point controlled by one bell Push

All as per item no 116 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item no 116 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item no 116 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

Supply and fixing in repair white finished single mounting modular plates with inner & outer cover suitable for housing modular accessories suitable for one module box complete all as specified and directed

All as per item no 127 above but suitable for 2 modules

All as per item no 127 above but suitable for 3 modules

All as per item no 127 above but suitable for 6 modules

All as per item no 127 above but suitable for 8 modules

S&F sheet metal boxes concealed in wall suitable for housing modular accessories for 1 or 2 modules complete all as specified and directed.

S&F sheet metal boxes concealed in wall suitable for housing modular accessories for 3 modules complete all as specified and directed.

S&F sheet metal boxes concealed in wall suitable for housing modular accessories for 6/8 modules complete all as specified and directed.

S & F for Modular blanker in suitable size as per site requirement complete all as specified and as directed.

Supply and fixing for batten/angular fittings complete all as specified and directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply and fixing Bell, AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing LED tube light batten box type with decorative end caps with single tube 1x 18/20 watt type complete internally pre wired and fixed to wall/ceiling incl fittings accessories connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells/ Bajaj/Philips/ CG/Eveready.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj /Wipro, Philips/Eveready.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Crompton/Bajaj/Havells/ Eveready.

Supply and fixing Wall light fixture lantern made up of polycarbonate ; suitable for LED 9 watt, spiral B-22 base holder including LED bulb 9 Watt with connection with all necessary accessories complete all as specified and directed. Make:- Havells, Cat No.LHDLO2160099 / PHILIPS / BAJAJ/Eveready

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 35 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket complete all as specified and directed. Make: Havells /CG/PHILIPS/BAJAJ

M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.

Taking down fan, ceiling fan and dismantling blades and removing fan and blades to store and after cleaning refixing the same with replacement of multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal complete all as specified and as directed.

Supply and fix exhaust fan, Plastic body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper wire upto ceiling rose complete all as specified and directed . Make: Crompton/ Bajaj/Havells/Usha/CG.

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into including size of PVC non metallic rigid heavy duty PVC conduit 20mm bore of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable,one run of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4.0 Sqmm size with multistranded copper conductor, drawn in including non metallic rigid PVC conduit 20mm bore including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete (single phase sub mains) .