AIC/AED/NIeT-10(2nd Call)/26-27/Gr_2

Supply of 6 Mtrs internally and extemally Hot dip galvanised Octagonal pole made up of 3 mm thick HT Steel sheet Conforming to grade S355JO, E 350 .The pole shaft shall be continuously tapered one section with single longitudinal welding. Top A/F of the shaft is 70 mm and bottom A/F is 130 mm. Base plate of 200 with pole shaft. Four (4) no.M 20.X 600 mm long "J" mm. X 200 mm. X 12mm (thk) shall be welded (inside & outside) pole bolts with accessories are included in supply for fixing of pole with foundation using 4 nos. existing holes on base plate. Poles shall be supplied with weather proof & vandal resistant ant inbuilt flash door including locking arrangement with Alan key. Arrangement shall be provided for fixing circuit board with cable termination facility and MC

Making RCC foundation of grade M20 (1:1.5:3)of size 400 mm dia 1500 mm out of which 1200 mm below the ground level (FGL) using 4 nos 12 mm dia steel reinforcement of grade Fe-415 with 50 mm clear cover to reinforcement and stirup using 8 mm dia steel reinforceent@150 c/c using shuttering along with supply and installation of 2 nos 63 mm dia PVC pipe for cable entry and exit 4 nos M24x750 J type founsdation bolt shall be anchored in the foundation (PCD 240 mm ) in such way that 125 mm length of bolt is projected above the foundation It includes water currrming as required and soil excavation & back filling. Base 1200mmx1200 mmx 250mm using 10 mm dia steel reinforcement @ 125 CC.It includes water currrrring as required and soil excavation & back filling. It also include supply of all material and Labour including errection of foundation at site As per soil bearing capacity & direction of EIC.

Distribution wiring for steel light on pole for outdoor fluorescent/SV/MV light fitting with 2x1/1.40 PVC insulated and sheathed wire (single core) in 15 mm dia Gl Pipe (ISI-Medium), without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia GI Pipe bracket of lengh 1.05 mts, on pole incl. S&F sutable MS flat clamps with bolts, nuts etc. as required and painting

S&F GI earth spike (1830x20) with 6 SWG Gi wire

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 16 sqmm cable

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core upto 16 sqmm

Supply OF ALUMINIUM ARMOURED CABLE OF FOLLOWING SIZE :Core/Size 2x4 sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supply, Fitting & Fixing 100 Watt LED High Power Light New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source.

Supply & Fixing Citizen display