Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC SHOP NO 2 JANKI PLAZA BHAGWAN MAHAVIR PATH KOPARGAON AHMEDNAGAR MAHARASHTRA 423 601 | KOPARGAON | AHMEDNAGAR | MAHARASHTRA | 423601 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹38.9 L+₹22,311 (0.58%)Rejected-Finance FLAT NO 02 RUTUPARNA APARTMENT PLOT NO 36 S NO 324 2A NEAR G D SAWANT COLLEGE PATHARDI NASIK 422 010 | NASHIK | MAHARASHTRA | 422010 | L2 | Rejected-Finance Not Lowest |
Tender Value
₹39.7 L
EMD Value
₹79,500
Closing Date
26 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As per Tender documents
2023_MES_616156_1
GE/NRC/8603/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹79,500
Yes
1 Dec 2023
29 Aug 2023
28 Sept 2023
29 Aug 2023
26 Sept 2023
12 Sept 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Surface dressing n exc 15 cm deep complete all as specified and as directed.
Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard soil complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m but not exc 3.0 m in depth and getting out in hard soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and directed
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed
Removing excavated material to a distance exc 250m but n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L moorum filling under floors or paving laid in layers n.exc 15cm thick, spread , levelled and rammed including watering complete all as specified and directed by Engr-in-Charge
M&L hardcore broken stone or boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to true surface complete all as specified and directed.
M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)
M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete and sub base of floor complete all as specified and directed.
M&L for RCC M-25 design mix (using 20mm graded stone agg) lintel beams, roof beams, cantilevers ,chajjas bressumers, lintels over 1.5m span complete all as specified and directed.
M&L for Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for fly ash brick work using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.
M&L for 18 to 20mm thick Granite (Telephonic black/Ruby red) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick. all as specified and directed.
M&L for form work to sides of concrete foundations,footings bases of coloumns raft and raft beams,sides and soffits (if any) of foundation and plinth beams, and similar work,vertical or to batter for rough finished surface of concrete complete all as specified and directed.
M&L for form work to edges of rough finished surfaces of concrete flats, treads, breaks in floors, windows cills,concrete railing, openings in concrete walls floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20 cm wide complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n. exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for form work to chajjas including edges or to batter for rough finished surface of concrete complete all as specified and directed.
M&L for form work to sides of pillars, posts,struts,piers,columns etc or to batter for rough finished surface of concrete complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20 mm graded stone agg) lintel beams, roof beams, cantilevers bressumers, lintels over 1.5m span complete all as specified and directed
M&L for RCC 1:2:4 type B1 (using 20 mm graded stone agg) slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20 mm graded stone agg) as in chajjas complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20 mm graded stone agg) as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC M-25 design mix (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases fo columns, etc,basement slabs, under-reamed piles and mass concretecomplete all as specified and directed.
M&L for RCC M-25 design mix (using 20mm graded stone agg) as in columns, pillars piers, posts and struts complete all as specified and directed.
Deformed steel bars TMT 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confiring to Fe-410 complete all as specified and directed.
All as per item No. 33.00 but 5mm dia and over upto and incuding 10mm dia in stirrups tie, spacers and binder complete all as specified and directed.
S&F framed work as in plates (plain or chequred) channels, square cut or notched with fabriction and erection of FE 410-W (Gde E-250) auality A (ordinary and counter sunk) forming holes over and including anchor bolts of required sizes complete all as shown in drgs.
S&F Steel work in tubular trusses,purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete fabrication and erection at site as per drgs. Make as per PS for structural steel.
M&L for Aluminium (minimum 50 micron powder coated) frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for damp proof course 50 mm thick B0 1:2:4 including form work and water proofing compound complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps,cooking platform and other similar work.
M&L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregates) laid in panels using formwork and finished even and fair to receive the topping layers as in sub base of floors complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 typce D-2(using 40 mmm graded stone aggregate) as in sub base to floors complete all as specified and as directed.
M&L for 15 mm thick cement screed bed in CM 1 : 6 for fixing of tiles complete all as specified and directed.
M&L Non Skid glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors set and jointed in cement slurry and pointed in coloured cement complete all as specified and directed.
M&L for 10mm thick backing coat in cement mortar (1:4) on vertical surfaces for fixing of tiles complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface (300 x 200) x 5 to 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
M&L for Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Over and including 20 mm thick screed bed in CM 1:6 for laying floor finishes and set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Note: Vitrified tile shall be double charged. shade of tile as approved by GE based on manufacturing companies catalogue.)
M&L for vitrified tile 8-10 mm thick as in skirting/riser of steps including 10 mm thick back coat in CM 1:4 complete all as specified and as directed. (Note : Vitrified tile shall be double charged.shade of tile as approved by GE based on manufacturing companies catlogue).
M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope of 1 : 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels finishing exposed edges fair or rounding or chamfering of exposed edges where directed and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete all as specified and directed.
M&L for rendering 15mm thick in CM 1 : 4 on roof surfaces finished even and smooth with extra cement complete all as specified and directed using waterproofing compound @ 3% by weight of cement complete all as specified.
Supply only integral waterproofing compound
M&L for Waterproofing on roof including flashing and junctions of parapet,kerb, wall etc.as under :- (a) Cleaning of plasetered roof,parapet,facia surface and applying one coat hot blown bitumen 85 / 25 @1.20 Kg/Sqm (b) Laying a layer of APP based polymeric membrane,3 mm thick(minimum),weighing not less than 3.60 kg/Sqm prefabricated fire layer waterproofing membrane reinforced with polyester non woven fabric(weighing not less than 160 gms/sqm) shall be applied over compatible primer at 0.40 litre/Sqm of density at 25 degree Centigrade 0.87-0.89 Kg /Litre and viscosity 70-160cps or cold sticker, application of APP modified membrance shall be by torch application. The overlaps shall be minimum 150mm on the transverse direction and 100 mm on the longitudinal direction. (c) Painting the exposed APP membrane surface with bitumastic aluminium paint @ 0.15Kg/Sqm. (d) APP membrance,Primer and bitumastic aluminium paint shall be of same brand. (e) For vertical surfaces i.e. parapets,wall etc. app membrane shall be tucked into groove and sealed with silicon sealant i.e. "Dowsil 789 weatherproofing silicon sealant" using gun.
M&L for 10mm thick cement plaster in cm1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and directed.
M&L for 15mm thick cement plaster in cm 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) complete all as specified and as directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:4 concrete surfaces of ceiling, chajjas etc. complete all as specified and directed.
M&L for preparation of new plastered surface and applying two coat of internal emulsion paint over Two coat of primer over 3 mm thick wall care putty in Two coats of approved make on wall surfaces complete all as specified and as directed.
M&L for applying Two or more coats of 100% Premium external emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Make as per Particular Specification.
M&L for preparation of newly plastered surfaces and applying two coat of cement base paint over a coat of primer on wall complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed.
M&L for Preparation of newly plastered or unplastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed.
M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification all as directed.
S&F 12 mm thick toughned glass door over and including all fittings and fixtures i.e. locking arrangements,pivot floor spring complete all as approved by Garrison engineer.
S&F solid PVC frame of size 50 x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube,with necessary arrangement for fixing of glass for lourver type window/ventilator and additional PVC beading around the frame for fixing of wire mesh complete all as specified and shown on drgs.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification all as directed.
S&F solid PVC frame of size 50 mm x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arrangement for fixing of glass for louver type window/ ventilator and additional PVC beading around the frame for fixing of wire mesh, S&F in opening complete all as specified and directed.
S&F 125mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed
S&F for Extruded aluminium alloy handles,150mm fabricated type anodized
S&F Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed
S&F 250mm Aluminium alloy, anodised,sliding door bolt with hasp,stapple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast-aluminium alloy and fixed.
S&F 6mm and thick PVC multiwall 250mm wide (tongue and groove interlocking type) panels, textured on one side (as approved): fixed to framework in ceiling with countersunk screws and inerlocked, including all necessary special fitting accessories such as junction, corner and turning matching to board. (GI framework to be measured and paid separately)
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by engr-in-charge.
M&L for 5.5mm thick sheet glass plain or tinted ordiner quality, fixed in windows.
S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sqm in each pane complete all as specified and directed.
M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple or fixed in alumium frames.
S&F 20mm dia, Brass chromium plated tubular towel rail, D type, 60cm long with flanges
S&F MS work as in hold fast wall ties, hooks for hanging fans, bands, straps, supports or stay rain water pipes, plain angle, cleats and similar small articles quality conforming to Fe-410-0 or Fe-310-0 with and including screws, bolts, nuts, washers all as required complete all as specified and directed.
M&L for counter wash hand basin of size 580x440 mm mounted on grannite and cuddapa with and M&L for granite platform of size 0.90 x 0.55m rested on 30 to 35mm thick cuddapa stone slab and two granite supported on tiled wall support edges rounded and chamferred complete job all as specified and directed by Engr-in-Charge. BIS approved.
M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of aluminium paint over a coat of aluminium primer
M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.
M&L for cutting/drilling existing pipe line & taking branch connection complete incl all necessary GI fiting, jointing materials, earth work etc.
S&F Tubes, 'medium grade', galvanised, with all fitting; supplied and laid in trenches complete size 20mm.
S&F Tubes, 'medium grade', galvanised, with all fitting; supplied and laid in trenches complete size 15mm.
S&F in repair vetreous china wash down water closet pan EWC (pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified.BIS approved.
S&F in plastic seat cover white closed pattern with flat bottom and cover with mild steel chromium plated or alluminium hinging device complete all as specified and directed.
S&F PVC valveless, syphonic action type, flushing cistern of 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets complete including flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cisterns complete all as specified and directed. BIS approved.
M&L for Vitreous China urinals, half stall type (back or corner wall type), white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;including brackets, flush pipe, CP urinal spreader, grating union, , union and cap and discharge pipe; complete all as specified and directed. BIS approved
M&L for PVC Nahani trap with grating including incl joining to waste pipe dia of outlet 75mm fixed in cement concrete type B1, (1:2:4) all as specified and directed
S&F Pillar cock, fancy type,(Swan neck type, long body) chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15 mm bore complete all as specified and as directed by Engineer-in-Charge. Specification as per SSR Part-I.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
M&L 15mm bore fancy type, chromium plated, cast copper alloy, with long shank and cup (Concealed type) stop valves, screwed down high pressure with enitch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.Specification as per SSR Part-I.
M&L for brass CP angle cock heavy duty 15mm dia capstan head complete all as specified and directed.BIS approved.
S&F fancy bib taps 15mm bore chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.specification as per SSR Part-I.
M&L for 15 mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe all as specified and directed.BIS approved.
M&L for 20 mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe all as specified and directed.BIS approved.
M&L for bottle trap brass chromium plated screwed down high pressure screwed both ends for iron pipe of bore 32 mm or for union and fixed Make Jaguar or equivilent all as specified and directed.
S&F GI tubing medium grade with all fittings fixed to walls or laid in floors 15mm bore including cutting chases for concealed water tubing complete all as specified and directed.GI tubing shall be concealed wherever directed by engr-in-charge.
S&F GI tubing medium grade with all fittings fixed to walls or laid in floors 20mm bore including cutting chases for concealed water tubing complete all as specified and directed.GI tubing shall be concealed wherever directed by engr-in-charge.
S&F of rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position over and including 20 mm dia float valve of brass complete all as specified in SSR 2009 Part-I all as specified and directed. Tank shall be BIS approved.
S&F for PVC (SWR) 110mm dia pipes single socketed in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls for 75mm dia pipes complete all as specified and directed.
S&F for PVC (SWR) vent cowl for 110mm bore pipe complete all as specified and directed.
S&F for PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and directed.
S&F PVC (SWR) junction single, (Single T) equal or un equal for 110mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius for 75mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius for 110mm bore complete all as specified and directed.
All as per item No.110.00 provided with acess door .
All as per item No.110.00 provided with acess door .
M&L PVC(SWR) gully trap 125/110mm setting and jointing in solvent cement
S&F PVC (SWR) 150 pipes single socketed in any length with rubber ring joints fixed to walls over and including necessary fixing arrangements to take roof water into rainwater pipe to the entire satifaction of the engr-in-charge.
M&L for reinforced concrete pipe class NP2, laid and joined complete with collars 150mm bore of pipe.
S&F Factory made RCC manhole covers grade designation LD 2.5, clear opening of frame 450X900mm ISI marked (IS 12592:2002).
M&L for point wiring complete with and including single core PVC insulated unsheathed flexible bright multistranded copper conductor cables 1.5 Sqmm, 1100 volts grade FRLS type drawn through & including heavy duty/grade PVC non -metallic PVC conduit and it accessories such as tee elbow, jointer, elbow corner, junction box etcconcealed in walls, columns/beams by means of cadmium plated screws and sunk cup washers along with 1.5 sqmm. PVC copper conductor cable as a earth continuity earth wire & connected to commen earth dolly at one end and metallic bodies at other end including adequate size of PVC boards for mounting switches, sockets fan regulator etc for One light point and one fan point controlled by one, one way swtich all as specified & directed by Engineer-in-Charge.
All as per ser item No. 117.00 herein before but with One 5 Amp 5 pin socket outlet point on independent board with ofter switches including earth wire as specified.
All as per ser item No. 117.00 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.
Supply and fixing switch socket combination 2 in 1, 5 Amp flush type complete all as specified.
Supply and fixng switch socket combination multipurpose flush type 2 in 1 type 3 and 3 pin 5/15 Amps, 230V, AC.
Supply and fixing inveter LED luminaire 600 x 600mm, 36 watt, 220 volts AC recessed/ surface type fittings, epoxy powder coated CRCA sheet housing with electronic driver, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
Supply and fix switch piano flush button type 5 Amps single pole one way .
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing of LED light fitting 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers.
Supply and fixing LED luminaires light fittings 1x 10 Watts polycarbonate LD T8 retrofit tube and MS batten with decorative end cap complete with all accessories such as spring loaded rotor type lamp holder, connector block, LED tube rod etc prewired incl three core copper cable 23/0.0076 from ceiling rose to tube light fittings.
Supply and fixing distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's with bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.
Supply and fixing ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.
Supply and fixing distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.
M&L for submain wiring with two single core PVC insulated unsheathed, FRLS type, multistranded flexible copper conductor 1100Volts grade cables 2 x 2.5 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 2.5 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded, FRLS type flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.
Supply and fixing of MCB TPN 32 Amps, 415 Volts, 50 Hz with 10 KA.
Supply and fixing of MCB SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA. Make - L&T or Legrand/ ABB.
Supply and fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA.
Supply, laying or fixing or passing through pipe commissioning and testing of XLPE insulated, armoured heavy duty, electric power cable with aluminium conductor, 1100 volts grade of cross sectional area 10 sqmm 2 core including suitable size lugs complete all as specified and directed
Supply, fixing and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 2 core 16 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed. Note for item No. 135.00 & 136.00 :- Excavation & earth work, HDPE pipe where required shall be measured & paid separately under relevant items.
M&L for replacement of pole Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.
Abhiraj Enterprises
Bidder Name
sunway associates
Abhiraj Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .