Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-Finance | ₹4.6 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹4.7 L+₹2,580 (0.56%)Accepted-Finance | ₹4.7 L+₹2,580 (0.56%) | L2 | Accepted-Finance Accepted |
| 3 | L3₹4.8 L+₹14,370 (3.09%)Accepted-Finance | ₹4.8 L+₹14,370 (3.09%) | L3 | Accepted-Finance Accepted |
| 4 | L4₹5.1 L+₹43,120 (9.28%)Accepted-Finance VALLUVAR NAGAR BAMBOOFLAT SOUTH ANDAMAN | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | ₹5.1 L+₹43,120 (9.28%) | L4 | Accepted-Finance Accepted |
| 5 | L5₹5.8 L+₹1.2 L (25.1%)Accepted-Finance | ₹5.8 L+₹1.2 L (25.1%) | L5 | Accepted-Finance Accepted |
Tender Value
₹4.5 L
EMD Value
₹8,937
Closing Date
21 Mar 2024, 3:00 pmClosed
Executive Engineer, RCD, APWD, Wimberly Gunj
Executive Engineer, RCD, APWD, Wimberly Gunj
AR MO Non Residential Building under Bambooflat Sub Division, RCD, APWD, Wimberly Gunj during 2023 24. S.W Providing of Assured Minimum Facilities under Bambooflat Jurisdiction for Parliamentary Election 2024
2024_APWD_13866_1
NIT No.95/EE/RCD/APWD/WG/2023-24
Open Tender
Civil Works - Buildings
Item Rate
15 days
RCD, APWD, Wimberly Gunj
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹8,937
22 Mar 2024
7 Mar 2024
22 Mar 2024
8 Mar 2024
21 Mar 2024
11 Mar 2024
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift
Cement mortar 1:4 (1 cement : 4 fine sand).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form work for:
Foundations, footings, bases for columns
Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete :
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378)
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend 87.5' 110 mm bend
Providing and fixing white vitreous china water closet squatting pan (Indian type) :
Long pattern W.C. pan of size 580 mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
20 mm nominal dia Pipes
Providing and fixing pre painted galvanised(PPGL) steel profile sheets AZ-150 of brand TATA Bluescope steel, Everest Industries Ltd,JSW Steel Ltd, Jindal India Ltd or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing 12 mm thick marine plywood (BWR) confirming to relevant specification to wooden frame backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastners of required dis & length (hold fast lugs or dash faster shall be paid for seperately). a)Superior Hardwood Cat-II(B)
Supplying empty Plastic Barrel of superior quality 200 ltr capacity at Polling Station.
Shri V R Subramani
B BAU RAO
SHIVA
M Mohammed Aslam
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .