Repair and renovation of RI staff quarter building near RI office at Gunupur during 2025-26

Scarping old paint with scrapers, sand papering & washing with soap water or soda including scaffolding charges up to 5m height including all T&P labour. etc. complete as directed by the Engineer in charge.

Removing Old lime or cement plaster including raking out joints 12mm deep and removing the debris within 50m lead with cost of all labour T&Petc. complete as directed by the Engineer in charge.

Dismantling & removing 2.5cm thick A.S. Flooring including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Dismantling G.C.I. Sheet or A.C. Sheet roofing after carefully removing nuts & bolts including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Earth work in foundation in hard soil or gravelly soil within 50m intial lead and lifts 1.5 M intial lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.

Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials, cost of all labour and T&P etc. complete in all respect as per direction by the Engineer in charge.

Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties,EMF,DMF and aditinal chargesof all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

Fly ash brick masonry in superstructure with cement mortar (1:6) using bricks of 23cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

R.C.C. work of M.20 in Roof slab using 12 mm size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 12 mm thick C.P. with C.M. (1:6) on outside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance and EMF,DMF and aditinal charges of all materials and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.

Providing and laying PCC (1:2:4) in all floors using 12mm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

Supplying, fitting, fixing of all types of MS Door / Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge

Supplying, Fitting & Fixing GCI Sheet of 0.4mm thick in Roofing including cost, conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge .

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Painting two coats with distemper over one coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Painting two coats with approved enamel paints of approved colour, shade Iron / work including sand papering, polishing the surface, cost, conveyances,EMF,DMF and aditinal charges of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Providing & laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25kg/sqm & 2mm thichness consisting of layers having center core of 20 micron thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.30 kg/sqm providing a coat of hot blown bitumen of 1.32 kg/sqm, applying & laying plastic felt membrane with 10 cm overlap adhered to blown bitumen of 85/25 or 90/15 grade & covered with a layer of hot blown bitumen @ 1.2 kg/sqm etc. complete.as per specification & direction of Engineer-in-charge.

Please Enable Macros to View BoQ information