Structure making, pole erection, earthpit making and OH line work for installation work of 100 KVA 11KV/440V transformer at old Sub-station of G.M. unit, Dhori Area.

Amount

Supplying of channel iron 75mm x 40mm x 6mm (7.14kg per metre) cross arm for two 11KV overhead line conductors complete with 50mm x 50mm x 6mm (angle iron bracket welded to the channel iron and complete with 50mm x 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc. (as per drawing) and painting with primer and finish paint as required.

Erection of RCC/PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and re-filling etc. as required. : Above 8.0 metre and upto 11.0 metre

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60 cm), 7/4.00 mm dia G.I. stay wire and strain wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of a set of cross bracing FRLS same work for 11KV overhead line double pole structure having four members fabricated out of 50mm x 50mm x 6mm angle iron to form a rectangle of minimum size 1400mm width x 2500mm height, complete with 50mm x 6mm M.S. flat iron clamps, bolts and nuts etc. (as per drawing) and painting with primer and finish paint as required.

Supplying and erection of 11KV pin Insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of 11KV disc insulator for 11KLV overhead lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc. as required.

Erection of ACSR conductor of 7/2.11mm to 7/3.00mm diameter including binding etc as required.

Erection of G.I. wire no. 8 SWG including binding etc. as required.

Erection of cradle guard as required.

Supply of G.I. wire 8 SWG.

Making of horn gap.

Providing of 11KV 400A vertical type GOS

Fixing of 11KV 400A vertical type GOS

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and laying 25 mm x 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and re-filling the trench etc. as required. Upto 120 sq. mm

Supplying and erection of three piece non linear resistor type lightning arrestor suitable for 3 wire, 11KV overhead lines with rated voltage 9KV (rms) with a nominal discharge current rating of 5KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc. as required.

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6 mm thick sheet steel enclosure duly painted with powder coating on existing rising main complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. : 200 amps TPN

Supply of timer switch 100A

Fixing of timer switch 100A

Applying priming coat : With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood (+) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works.

Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified size and shape including form work, plastering if specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/pipe not to be deducted)

Dismantling of pole/street light standard/strut embedded in brick ballast foundation etc. as required.

Dismantling of overhead lines comprising of copper/aluminium overhead conductor, G.I. wire cross arms, insulators etc. as required.

Clearing jungle including uprooting of rank vegetation, grass, Brush wood, trees and saplings of girth upto 30cm measured at a height of 1M above ground level and removal of rubbish upto a distance of 50M outside the periphery of the area cleared.

Clearing grass and removal of the rubbish up to a distance of 50m outside the periphery of the area cleared.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 4 x 16 sq.mm + 2 x 16 sq.mm earth wire.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES (BID ID -1118204)