SPL REPAIR OF BLDG NO P-134/01 TO 12 OR MD ACCN AT MORAR CANTT GWALIOR UNDER GE GWALIOR

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed.

Demolition of Reinforced Cement Concrete (Existing RCC water tank) of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for cement concrete type E2 1:5:10 (using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed.

M&L for non - skid ceramic tile coloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match, including 15mm thick screed bed complete all as specified and directed.

M&L for non - skid ceramic tile coloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including rendering 10 mm thick on fair faces brick work or concrete surface in cement plaster 1:4 complete all as specified and directed.

M&L for non - skid ceramic tile coloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement plaster 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/ 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, aid over and including rendering 10 mm thick on fair faces brick work or concrete surface in cement plaster 1:4 complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement plaster 1:6, complete all as specified and directed.

M&L for machine cut kota stone flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4, finished even and smooth complete all as specified and directed.

M&L for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointedcomplete all as specified and directed.

M&L Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6, finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 5 mm thick on faces or brick work ,concrete surfaces, in ceiling & in cm 1:3, finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC , finished even and smooth (without using extra lime or cement) complete all as specified and directed. Note:- WPC shall be measured & paid seperately.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Material & Labour for new plastered surfaces applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for new plasterd surface applying two coats of distemper oil emulsion white or tinted over and including a layer of 3mm thick wall care putty on wall complete all as specified and directed.

M&L for complete removal of exiting treatment from external walls (any no of layers ) by scrapping with steel scrappers or any other means, preparation of old surfaces complete applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and as directed.

M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying two coat of oil emulsion distemper white or tinted complete all as specified and directed.

M&L for preparation of old surface and applying one coat of white wash (lime) on walls inl cornices plastered or un-plastered surfaces complete all as specified and directed.

M&L for preparation of old surface and applying one coat of white wash (lime) on ceiling inl cornices plastered or un-plastered surfaces complete all as specified and directed.

Taking down steel tubing and connection 15m bore incl cleaning for refixing or removing from site complete all as specified and directed.

All as per Ser item No 30 above but 20 mm dia pipe complete all as specified and directed.

M&L for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and floor complete all as specified and directed.

All as per Ser item No 32 above but 20 mm dia pipe complete all as specified and directed.

S&F in replacement PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed 75mm dia outlet complete all as specified and directed.

S&F in replacement 15mm bore bib taps, fancy type chromium plated cast copper alloy with capaston head handle, screwed down screwed iron pipe or for brass ferule fixed, complete all as specified and directed.

S&F, in replacement15mm Angle stop valve of CP brass any colour high pressure screwed for iron pipe or for union fixed complete all as specified and directed.

S&F in replacement PVC connection 15mm size with PTMT nuts on both ends of length 450 mm complete all as specified and directed.

S&F in replacement swivel shower of brass chromium plated of size 125mm for fixing with 15mm bore pipe complete all as specified and directed.

S&F in replacement tabular towel rail brass chromium plated, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in replacement for Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F in replacement Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in replacement Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed.

S&F in replacement grating 100/125 mm dia of PTMT, fixed to Nahani trap complete all as specified and directed.

S&F in replacement stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 900x750 mm including screws and wt not less than 5.00 Kg complete all as specified and directed.

S&F kitchen sinks with drainage board made of stainless steel 1mm thick with kitchen or laboratory with plug, washers, wastes, including fixing (cantilever brackets and connecting union to pipe overall size 915mm x 460mm boul size 410mm x 330mm x 160mm) complete all as specified and directed.

S&F in replacement wash hand basin vitreous china (flat back) of size 550 x 400 mm excluding pillar taps, waste pipe, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete complete all as specified and directed.

S&F in replacement 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly -nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in replacement Brass CP mixer for basin mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F, in replacement 15 mm bore, cast copper alloy chromium plated fancy type wall mixer tap with telephonic shower(3-in-1 system) for cold & hot water wall mixer complete all as specified and as directed

S&F in replacement vitreous china squatting pan "(Orrissa" pattern) size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed.

S&F in replacement PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.

S&F in repair for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres white colour hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed

S&F, 25mm stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore, complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore, complete all as specified and directed.

S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.

S&F in replacement for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in replacement for PVC (SWR) 'P' or 'S' trap 110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in replacement for PVC (SWR) floor trap/ Nahani trap 75mm, plain with greating including setting and jointing with solvent cement complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed.

S&F for pressed steel frame of size 125 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate, etc, complete, as specified, complete all as specified and directed.

S&F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs,hinges, lock strike plate, etc, complete, as specified, complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 30 mm thick Flush shutters, solid core construction with block board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping /frame to match complete all as specified and directed.

S&F for 35 mm thick skeleton shutters of 2nd class Hard Wood for door, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed.

S&F anodized powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, widows, ventilators, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F anodized powder coated aluminium windows, ventilators shutters, sliding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, anodized aluminium snap beading screws, locking latches etc complete all as specified and directed.

S&F MS framed work as in grill or framed guard bars with end of bars welded or riveted into spikes conforming to Fe- 290 Gde E-165 complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and directed.

S&F for 100 mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws, solvent cement/adehesive complete all as specified and directed.

S&F for continous (piano) hinges , mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed.

S&F for mild steel Easy- slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed.

S&F for 12 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified .

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed.

S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed.

S&F figured glass, pin head type 4mm thick and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed.

M&L for cutting out cracks to V section in existing walls, roofing or terrace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

S&F curtain rod of stainless steel 23-25 mm dia pipe thickness not less than 0.8 mm of pipe with fixing bracket, side nobes etc fixed on walls with screws with PVC rawl plugs etc complete all as specified and directed.

M&L for providing cement concrete type C1 1:3:6 ( using 20 mm graded aggregate) as filling inside pressed steel frame complete all as specified and directed.

M&L for preparing old painted wood and wood based surfaces exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Removing existing water proofing treatment (Brick tile terracing), roughning of concrete surfaces, cleaning of concrete surfaces with water and removing debries/rubbish off materials out side of Ministry of defence (MOD) land complete all as specified and directed.

M&L, 10mm thick screed bed or cement mortar 1: 4 on concrete surfaces mixed with WPC, surface finished even and smooth W/O using extra cement complete all as specified and as directed. Note : WPC shall be measured & paid seperately.

M&L, bitumenous based primer conforming to IS-3384-1965 @ 0.40 Kg / Sqm including preparation of roof surface complete all as specified and as directed.

M&L, for APP based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified.

M&L, for precast cement concrete tiles of size 250mm x 250mm x 22mm as in roof top ,confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM 1:6 and set, jointed and pointed in neat cement slurry in floors, and cut & polished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the Engr-in-charge complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggrtegate as in plinth protection/path and the like including finsihing even & fair complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed.

M&L for 60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid over 50mm thick sand cushioning complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 40mm graded stone aggregate in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe size of 150mm bore complete all as specified and directed.

M&L for 150 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including form work and finishing fair and smooth using extra cement (forming fair finished channel shall be measured and paid for separately) complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone agg) as in cover slabs for man holes and set in CM 1:6 including necessary from work all as specified. Note: Reinforcement and form work shall be measured paid separately)

M&L PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in coping and grove cutting every 1.5m length including necessary form work complete all as specified and directed.

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed.

Cutting into existing manholes for connecting new drains of internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed.

Taking down unserviceable TPN DB with MCB's of any make/capacity, complete all as specified and directed.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One Bell/Buzzer point controlled by one way 5 Amp push button switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

For one light point controlled by 2- two way switch

All as per Ser item No 126 above but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. One for Inverter connection complete all as specified and directed.

S&F Modular switch 1 way 6A,1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.

S&F Modular switch 1 way 16A,1 module 15 Amp complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Socket 15/25A - 2/3 pin combined 2 module complete all as specified and directed. (For Inverter)

S&F Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F modular bell push flush type, 5 Amps complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed.

S&F LED Lamp 09/10, efficiency > 130 lumen/wattwatt complete with 5 star rating complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade confirming to IS 14930 (Part-I) 2001,(ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 25 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting ,Efficiency >100 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

Supply and fixing BLDG LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

M&L for bending & shaping of 40 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary clamps, brackets and bolts mtr etc to fixed on wall/pole as per site requirement including fixing on pole with light fittings all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm all as specified and directed.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including self closing locking arrangement and comprising for following fittings incl taking down existing MCB DB TPN 4 way:- (i) MCCB TPN, 100 Amps, 16 KA - 01 No (For incoming) including required SPN/SP (ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts) - 01 No (iv) Indicator Lamp set of three R,Y,B -01 Set (v) ASS & VSS with CTs -02 Nos (01 Each) (vi) MCB SP 63 Amps, 230 volts - 04 Nos (For outgoing) (vii) Nutral bus bar link mounted on insulator. (viii) Place for fixing the energy meter. - 04 Nos NOTE :-(i) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter. (ii) Cable entry gland made of polycarbonate of appropriated size shall be provided in each cable / wire entry as per IS standered. (iii) All internal wiring inside the panel used for metering

S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and directed.

M&L for sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for INDOOR joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specifies and directed.

All as per Ser item No 158 above but of size 20 mm dia complete all as specified and directed.

M & L for GI pipe Med grade of 25mm dia alongwith all fittings and fixtures complete laid in trenches all as specified and directed.

S&F tube Medium' grade galvanised with all fitting fixed to wall/floor, of 20 mm dia complete all as specified and directed.

S&F including replacement gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 25 mm dia complete all as specified and directed.

S&F including replacement gun metal gate valves with iron wheel head screwed at both ends for iron pipes of 20 mm dia complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

S&F for modular plate and provising of new modular plate of different size including fixing ,the existing modular switchs , modular socket ,modulare regulator and refixing them in new board complete all as specified and directed. Note : replacement of any switches ,sockets ,fan regulator will be measured under separated items

White cover plate with frame but 2/3/4 module

White cover plate with frame but 6 module

White cover plate with frame but 8/12 module

M/s Himgiri construction (BID ID -3055903)

Arkay Instrumentation (BID ID -3055194)

M/s NILAY ENGINEERS (BID ID -3056334)

M/S YOGANSH CONSTRUCTION CO. (BID ID -3056209)

Lall Electronics (BID ID -3056113)

M/s Gulshan and Brothers (BID ID -3056731)

ASHISH SHARMA (BID ID -3056503)