REPAIR/RENOVATION OF BUILDING AT GHS PATTA BOHRI ZONE JAMMU DISTRICT JAMMU

Amount

Demolishing Brick tiles covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.

Demolishing of mud phaska in terracing and disposal of material with in 50 metre lead.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size Crushed. Including all leads lifts and carriages

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) Including all leads lifts and carriages

6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) Including all leads lifts and carriages

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete.with residuallype petroleum bitumen of penetration 80'100

Providing & laying Tar sheet roof complete job as per direction of engineer incharge at site

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thickmud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobrileaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat with Hand moulded F.P.S brick tiles.Including all leads lifts and carriages

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : in 75x75 mm deep chase.Including all leads lifts and carriages

Making khurras 45*45cm with average minimum thickness of 5 cm cemnt concrete 1:2:4(1 cement 2 coarse sand 4 graded stone agg. Of 20mm nominal size) over pvc sheet 1m*1m*400 micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete Including all leads lifts and carriages

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed Including all leads lifts and carriages

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4coarse sand) including grouting the joints with white cement and macthing pigments etc. complete size tile 60x60 cm.Including all leads lifts and carriages

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge). 35mm Thick Second class kail wood.

Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutter for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick Marine plywood conforming to IS: 710

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Finishing walls with water proofing cement paint of required shade old work (two or more coats) applied @3.84 kg/10sqm

Engagement of painter for writing name of school/making logo of Smagra Shiksha on wall through painter.complete job

Providing and fixing electic point complete in all respects as per directions of Engineer incharge

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

Jai Singh Manhas

m/s vinay sharma

Rakesh Kumar

Ravi Kant

M/S ONKAR SINGH

M/s Romesh Chander Contractor