PDG. EPABX SYSTEM IN SESSIONS COURT AND OLD 6 NOS. COURTS BUILDING IN JUDICIAL COMPLEX AT SIRSA

Amount

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. HSR 31.44 (b) 25mm dia (HSR 31.44).

Supply and erection of PVC pipe ISI marked (Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of work. PVC pipe of 32 mm dia HSR No. 31.58

Supply and Laying of multicore Telephone cable conductor size 0.51mm bright annealed copper conductor PVC insulated and shealed in existing pipe / Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer-in- Charge of the work. HSR No. 31.78 (R&M/ Simon/ Molex). 2 Pair

Non Schedule Items: Supply, Erection, testing and commissioning of e-Communication appliance for voice with following features & Specifications :- Make: - Matrix/ Alcatel/ Unify/ Avaya. EPABX system should be configured for: 04 Trunk Lines. 01 Pri. 8Digital Extensions. 96 Analog Extensions for analog push button telephones Expandable upto 128 Ports. System should have Core to IP Switch Welcome message with direct extensions dialing System should have DISA ( Direct inward Station Access ) & DOSA ( Direct outward Station Access) facility without consuming any port of the system. Preference would be given to the manufacturer having DSIR recognized R&D. The System shall have the inbuilt auto-attendant facility. The system should support megnato phones also. The PRI card should be software programmable for TE/NT. The system shall have multiple port interfaces such as analog. The system should have in-skin GSM card so that the multiple SIMs can be inserted on the GSM card plugged on to the PBX platform. Hence the calls on GSM mobile can be routed through this SIMs and contribute in reduction of overall telecom bill. The system shall have multiple port interfaces such as analog extension, IP Extension, GSM/3G, E&M Line, PRI/E1 and VoIP. - The System shall have at least 2 RS232 ports for SMDR/PMS/CAS Interface.- EPABX should have built-in one number of public address port and external music port. - The system shall support flexible 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all. - Routing of calls to only permissible legal networks (Logical Partitioning). Conversation recording should be possible on Analog/Digital/IP as well as Mobile SIP Smartphone (Android/ iPhone). The system shall have security dialer.i.e. EPABX system should have provision to any sensor such as Glass break sensor, fire sensor etc. shall connect directly to the system. When sensor get activated system will dial out the pre-programmed number and deliver prerecorded emergency message as well as request for confirmation. - The system should support walkie talkie interface with EPABX system.

Push Button Telephone Desktop model Telephone instrument without cli make Beetal /Binatone/Panasonic

IP Phone with graphical display.

Plan set (1+1) Beetel/Panasonic Caller ID,speaker Phone

Supply and erection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilities. 20 Pair

S/E/T/C of UTP Cat-6 cable in existing pipe / channel complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work Make R&M/ Simon/ Molex

S/E/T/C of Telephone in/out connector Make: R&M/ Simon/ Molex

S/E/T/C of Face plate (Single / Dual) complete in all respect up 12 to the entire satisfaction of Engineer-in-Charge of the work. Make R&M/ Simon/ Molex

S/E/T/C 09 U rack including power distribution kit, cable Manager complete in all respect. Make: HCL / Comrack.

S/E/T/C of 2 kva online UPS with 2 hours backup. Make Microtec, APC, Elnova.

NB TECHNOLOGIES INDIA

Netromics Engineering Solutions Private Limited