Construction of Material Recovery Centre (MRF) at Chhuriapada, Jharianair in W. No. - 09.

Amount

Earth Work excavation in hard soil including moorum stony earth and earth mixed with boulder within 50 m initial lead and 1.5 m initial lift including dressing and breaking clods levelling the bed up to required depth and depositing the excavated materials with all leads and lifts T and P etc. complete as per direction of Engineer-in-charge.

Conveying the excavated earth by mechanical means within 5 km lead with loading and unloading etc. complete.

Supplying and filling F&P with river sand with well watering and ramming etc. complete.

Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 4 cm size CBHG metal etc. complete.

Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&P etc. complete.

Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&P etc. complete.

Supplying all materials, labour, T&P and providing Cement Concrete (1:2:4) using 12mm to 20mm size CBHG chips etc. complete.

Supplying all materials, labour, T&P and providing Reinforced Cement Concrete/ CC (M20) using 12mm to 20mm size CBHG chips etc. complete.

Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) inSuperstructure etc. complete.

Providing 12 mm thick CP(1:6) to out side smooth surface etc. complete.

Providing 16 mm thick CP(1:6) to in side smmoth surface etc. complete.

Providing 12 mm thick CP(1:4) to out side smooth surface etc. complete.

Two coat cement wash to inside and out side smooth surface with all cost of labour, T&P , materials etc. complete.

Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base plates made out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete.

Supplying all materials, labour, T&P for providing Mild Steel tubular or rectangular purlins with runners bracing for tubular trusses made out of ERW tubes of O.D.76.1 mm and 3.15 mm thick Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete.

Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.)

Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete.

Supplying Fitting & fixing of MS Shutter with frame with MS angle frame of 35x35x6 mm and shutter section of 30x30x5mm MS angle with welding of 25x6 mm flat and welding of 16 gauge CR sheet with arrangement of clamp fitting of 3 nos of 4" hinges 1 no 2" hinges and 300mmx16 mm Aldrop with8" Tower bolt including cost of all material etc complete

M.S. Grill gate made out of M.S.flat conforming to IS:2062/2006, painted with red oxide primer as per the design approved .

M.S.Panneled Window double leaved shutter with M.S.frame & Grill overall size including frame:- 1220mm (H) x 910mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 35x35x6mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 1.0mm C.R.Sheet. Panel stiffener covering width of each leaf :- 19x5mm M.S.Flat 2nos on each leaf. Hinges size :- 100mm 4nos (2nos each side) bought out as per ISS. Hold fast :- 35 x 35x 6mm M.S.Angle 100mm length bifurcated at the tip 2nos one each side. Handle :- 19x5mm M.S.Flat fabricated (inside) 2nos. Tower bolt :- 4nos bought out as per ISS.

Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm to 20mmsize BHGCB chips including centering and shuttering etc. complete. For lintel

Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm to 20mmsize BHGCB chips including centering and shuttering etc. complete. For Plinth Beam

Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete.

Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.

Supplying all materials, labour, T&P for painting two coats over iron work with any approved SE paint including all cost , labour, T&P etc. complete.

Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Fire Line Gypsum Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Supplying ,fitting & fixing of Orissa pan ,100mm.dia. H.C.I.,P-trap & jointing materials etc all complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, T&P and cutting grooves in pucca floor or Brick wall and mending good the damages for taking G.I. pipes complete as per P.H. specification.

Supplying all materials, labour, T&P and cutting holes in brick or stone masonry wall for taking G.I. pipes, HCI pipes, and mending good the damages 375mm thick wall.

Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. 20mm dia UPVC pipe

Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. 25mm dia UPVC pipe

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) 15mm dia C.P. concealed stop cock (plazza / Zigma / Mousami)

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) C.P. soap disc.

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) 15mm dia C.P. short body Bib cock (plazza / Zigma / Mousami)

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) 15mm dia C.P. long body Bib cock (plazza / Zigma / Mousami

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma)C.P. Towel ring

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) C.P. Towel 450mmx25mm

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) Bevelled edge mirror (600mm 450mm)

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) 12.50 ltrs capacity LL flushing with complete fittings

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) 40 mm brass / gmfw valve (ISI)

Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaze/Ciser/Zigma) Flat back standing Urinal (Medium)

Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110mm dia PVC SWR pipe S/S

Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110mm dia PVC single junction

Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110 mm Plain Bend 45 degree

Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110mm dia P.V.C. SWR Cowl

Fixing Vertified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete

Fixing ceramic tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete

Supplying fitting and fixing of PVC framed with shutter for Doors etc. complete.

Add for internal electrification.

ROBIN PANDEY