CLEANING TO SEWAGE LINE, MANHOLES AND CERTAIN REPAIR/ MAINT TO DRAINS, SEWAGE LINE, MANHOLES, APPROACH PATH, AND OTHER MISC MAINT TO OFFRS MD ACCN AND OTM AT URBAN VILLAGE, CASSEL ROAD, MANEKSHAW MARG IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CAN

Demolition and breaking up 150 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

Demolition and breaking up 200 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

Demolition and breaking up 300 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes sewage line etc not exc. 10 Sqm on plan and getting out complete all as specified and directed.

Description all as per item No 4 have in before but depth exceeding 1.5mts and not exc 3 mtr all as specified and directed.

Returning, filling in, trenches with soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) bedding for sewage lines of 150mm dia incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Description all as per sl item No 8 above but for bed of sewage line of 200mm dia all as specified and directed.

M& L for PCC 1:4:8 type D2 (using 40 mm grade stone aggregate) as in bed to drain pipe 300 mm bore including forming cradles complete all as specified and directed.

M & L for 200 mm bore of RCC hume pipe class NP2 laid and and jointed complete with colleres and laid in trenches with laying pipes level and tested complete all as specified and as directed.

S&F DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

S&F DWCPE (SN8) nominal size 200 mm (internal dia) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

M&L for PCC (1:3:6) type D-2 (using 40mm graded stone aggregate) as in foundation etc, complete all as specified & directed

S & F for wall cladding tiles of size 300mm x 600mmx 8-12mm thick on vertical surfaces of wall , such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:4 and as per sample approved by GE complete all as specified and as directed.

M&L for brick work with sub-class 'B' bricks (old size)straight or curved on plan exceeding 6 mtrs mean readius built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm in cement mortar 1:4 mixed with WPC @ 3% by weight of cement or as per manufacturer's instructions(whicherver may be higher)to fair faces of brick or conrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (WPC sall be measured & paid for speparately )

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement

M&L for applying two coats of cement base paint over a coat of cement primer on newly plastered surfaces of wall complete all as specified and directed.

S&F Precast Plastic fibre reinforced concrete manhole cover medium duty of size 1000mm x 500mm x 70mm confoming to IS- 12592 incl dimolition of old RCC work , complete all as specified and directed.

S&F in repairs oval access doors suitable for bend/branches pieces for 75mm bore CI pipe. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls or laid in floors/trenches complete all as specified and directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls or laid in floors/trenches complete all as specified and directed NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S & F Sand cast iron soil waste and vent pipes 100mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F Sand cast iron soil waste and vent pipes75 mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

Description all as per above item No 23 except bricks. (By using brick obtained from srl. item No. 22)

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises.

M&L for glazed coloured ceremic tiles sizes 600x300x 7mm thk tiles on vertical surfaces, such as skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10 mm thick backing/ screed in CM 1:4 complete all as specified and directed.

M & L for mild steel work , Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including erection in ground complete all as specified and directed.

Expanded metal not exc 4 kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified.

S&F for Mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including cutting etc complete all as specified.

Supply & fixing Chain link MS galvanisd fencing any size or type (approved by GE) including line wires, any mesh, size and type to any of standards, rails, staining bolts, etc including provision of bindings wire complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, incl taking out embedded portion & making good disturbed ground,post embedded in concrete, brick work, masonary etc.

M & L for Machine pressed rubber moulded vibro compacted precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment over 25 mm thick sand coushioning complete all as specified.

M & L for OUT DOOR coloured ceramic chequered tiles 8 to 9 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in wh

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor Finishing fair and even without using extra cement complete.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in floors, plinth protection, Path etc (finished even and fair) laid in panels including joints filled with sealing compound grade 'A' complete all as directed by Engr-in-Charge

M & L for applying one coat of synthetic enamel ordinary tint paint on old steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described incl preparation of steel surfaces complete all as specified.

Each Job

S & F Aluminium Composite panel (ACP Sheets colour as approved by GE) of 4 mm thick joint with cilicon/ adhesive as per manufacturer instruction including necessary aluminium framed work as required shape and size by welding etc fixing to wall/ ceiling/ RCC column/ boarding/ Gates/ Name Plates on gates with necessary fixing arrangements upto a height of 10 Mtrs including dismantling of existing sheets of any type complete all as specified and as directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling existing sheet, complete all as specified.

M&L PCC (1:2:4) type B-1 (20mm graded aggtt) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, necessary form work, as directed complete