REPAIR TO FLOOR, PLASTER, PLUMBING AND SANITARY FITTINGS, MISC B/R AND E/M WORKS IN TECH BUILDINGS AT AF STN UTARLAI

Amount

M&L for vitrified ceramic double charged light shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm,(size of tile 600x600mm) each in floors etc. set and jointed in neat cement slurry, over 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match including dismantling of old tiles complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles of size (300x300 mm) x7mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed bed in CM 1:6 including dismantling old tiles complete all as specified and directed

M&L for glazed ceramic coloured joint free tiles of size (450x300 mm) x 7mm thick in dados skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM 1:4 including dismantling old tiles complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick (size not less than 550x500mm ) including provided white marble border of 18-20 mm thick and 150mm set and jointed neat cement slurry over and including cement screed base 20mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting and polishing mirror finish type including dismantling of old stone slabs complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick as in window cill skirting treads etc over cement screed base laid over 15mm thick rendering in CM 1:4 and jointed neat cement slurry with grey cement slurry with pigment to match the shade of the slab including rubbing cutting and polishing mirror finish type including dismantling of old stones slabs complete all as specified and directed.

M&L 20mm thick granite (of any type) work (table rubbled and polished ) for urinal partion work fixed in wall jointed together two pieces with stone adhesive including chase pinning in wall edge grinding & polishing including dismantling of old stone slabs complete all as specified and directed.

S&F in repairs WC pedestal pattern wash down type (European type WC), white or coloured superior quality including plastic seat cover and making good to the disturbed surfaces complete all as directed

S&F in repair 10 Ltr capacity PVC valve less, symphonic action type flushing cistern low level white with inlet ball valve float & handle complete all as directed

S&F in repairs WC pedestal pattern Single piece (European type WC), white or coloured superior quality including flushing cistern and plastic seat cover and making good to the disturbed surfaces complete all as directed

S&F in repair vitreous china wash hand basin size 550x400mm including vitreous china pedestal brackets & one No PTMT waste coupling 32 mm size, 1 No PVC connection 600 mm long, 15 mm bore a CP cast copper alloy fancy type pillar tap quarter turn type complete flexible PVC waste pipe of suitable length all as directed at site

S&F as in repairs stainless steel grating doom of 100mm dia with / without central hole set over the existing nahani trap/ floor trap in neat cement & pointed to match the floor finished all as directed

S&F in repairs 15mm bib tap cast copper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs vitreous china urinal, half stall type including suitable size waste coupling and waste pipe complete all as specified and directed

S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe minimum weight 60gms complete all as specified and directed

S&F in repairs for Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete wall surfaces finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed

M&L for 05 mm thick rendering in CM 1:3 on ceiling /concrete surfaces finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on brick/concrete wall surfaces finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed

M&L for preparation on new plaster surface of ceiling & applying three coat of white wash complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying three coat of white wash on walls complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying two coat of oil bound distemper over 3mm thick wall care putty followed by a coat of primer complete all as specified and directed

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of all weather coat paint , over a coat of chalk whiting complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as sub base and foundation of concrete complete all as specified and directed

M&L for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement as in floor hard standing complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement as in plinth protection complete all as specified and directed

S&F in paper roll holder Stainless steel ofstandard size complete all as specified and directed.

S&F in repair 15mm chromium plated health faucet with 1.0 meter long CP flexible pipe complete all as directed

S&F for galvanised iron steel water tubing 15mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete including taking down old tubing all as specified and directed

S&F for galvanised iron steel water tubing 20mm bore midium grade with all fittings and fixed to wall/ceiling or laid in floors complete including taking down old tubing all as specified and directed

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth on stone concrete block or slab wall complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres complete all as specified and directed

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I along with PTMT ball valve of 20 mm bore along with 20 mm bore gun metal globe or gate valve complete including dismantling of old water tank all as specified and directed

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I along with PTMT ball valve of 20 mm bore along with 20 mm bore gun metal globe or gate valve complete including dismantling of old water tank all as specified and directed

M&L for 75mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in water tank plate form including necessary form work to side of concrete complete all as specified and directed

M&L 12mm thick perforated /semi perforated particle board/tiles for insulation and accoustic purposes 60x60cm in size, fixed with staples on snap grid in ceiling including S&F false ceiling anodised aluminium snap grid frame work for false ceiling, grid size 60cmx60cm with the following section for frame work:- (a) wall side angle 24x24x0.43mm (b) Main tee 24x34x0.35mm (c) cross tee 24x25x0.30mm having integral splices at both ends for interlocking complete with suitable hanging arrangement of metalic fastners, holding cleats GI wire suspenders etc along with dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed

S & F factory made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with prelam sheet as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per specification in MES SSR Part - I & II complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section , complete all as specified

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150 mm long Aluminium handles, cast type, anodised , complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and stack clamps as in rain water pipes including demolition and breaking up drain pipe complete all as specified and directed

S&F 110mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed

Taking down shutters of any description, area exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed .

Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0 Sqm each complete all as specified and directed .

S & F anodized aluminum work for partition, door frame & shutter, windows frame with one or more rebates fabricated with tubular and other sections of approved make fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions at top, bottom & sides with required PVC neoprene belt etc. Aluminum sections shall be jointed mechanically where ever required including supply and fixing cleats angles, aluminium snap beading for glazing /panelling, CP brass/stainless steel screws complete all as specified and directed. Note: The aluminum anap beading and rubber gasket for fixing to galss panel should be free for fixing and rate to be included in this items.

S & F anodized aluminum window/ventilator shutter only fixed/sliding type/with or without sash bar of aluminum section weighing not less than 0.25 Kg/m including necessary joining angle cleats, glazing clips, dust guard, roller, anodized aluminum snap beading, steel screw for fixing, anodized aluminum fittings such as peg stay, stainless steel butt hinges, suitable purpose made handle, etc complete accessories required for fixing all as directed and including providing AC/cooler opening arrangement complete all as specified and directed

S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed .

S&F 4mm thick figured (frosted) glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed .

M&L for precast cement concrete block masonary with solid blocks made of PCC (1:3:6) type C-1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 Demolition of brick work or stone/boulder/PCC block masonary complete all as specified and directed

S & F factory made Steel window with side hung shutters including box type hinges with mild steel handle and peg stay complete with glazing bars dovetailed or welded complete all as specified and directed

S&F aluminium door stopper double legged with rubber shoe of size 55 x 70 mm long fixed to door shutters with steel screws complete all as specified and directed .

S & F mild steel mortice lock vertical type size 100mm 4 levers complete all as specified and directed .

S&F door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width of Aluminum body (die cast) weight between 61 to 80 kg complete all as specified and directed .

M&L for preparation of old steel surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture 1.40mm fixed with stainless steel wire staples, complete all as specified and directed

M & L for preparation of old treated wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair 15mm bore cast copper alloy chromium plated angle valve quarter turn fancy type with flange plate complete all as specified and directed

S&F in repair 15mm bore cast copper alloy chromium plated two way angle cock quarter turn fancy type with flange plate complete all as specified and directed

S&F in repair stainless steel towel rail round 200mm dia with round flange of standard quality fixed with steel screw and PVC rawl plug complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for 60 mm thick ISI marked, M-35 Machine pressed precast interlocking paver block any shape and size confirming to IS 15658-2006 fixed with cement and pigment glossy finish coloured as approved by GE fixed on sand cushion 25 mm thick & ends to be closed with PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as site reqd to filing the gaps between tiles and road edges including demolition of old paver blocks complete all as specified and directed.

Taking down carefully to existing copper/Aluminum point wiring (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

M&L for Point wiring concealed type with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified.

One light / Fan point controlled by one way switch 6/5 Amp .

One 3 pin socket outlet 6/5 Amps on the same board with other switches

One 3 pin 6/5 Amp socket outlet controlled by one switch on independent board

M&L Point wiring of Power point concealed type contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl concealed PVC conduit (ISI Mark) of required size with all accessories including providing providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing suitable size mounting plates complete accessories for mounting of modular switch/sockets alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.

S&F in repair switch piano flush modular type (ISI marked), single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed.

S&F in repair switch socket combination 2 in 1, 3 pin, 6/5 Amp piano flush modular type (ISI marked), 240 Volts complete all as specified & directed.

S&F in repair socket 2 in 1, 3 pin, 16/15 Amp piano flush modular type (ISI marked), 240 Volts complete all as specified & directed.

S&F in repair ceiling rose, surface bakelite, three terminals complete all as specified & directed.

S&F in repair stepped type electronic fan regulator flush modular type complete all as specified & directed.

M&L for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces upto entire satifaction of Engineer - in-charge and taking down old unserviceable submain wiring complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good.

S&F in repair MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed.

S&F in repair MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed.

S&F in repair LED tube light fitting 4' long, 20/18 Watt single phase 230 V with illumination efficiency more than 120 Lumen/Watt, 3000K/6000K, IP-66 decorative tuneable white browse through mood changing colour options type slim ultra bright LED polycarbonate tube fixture with extruded heat shrink, environmental friendly energy efficientwith very high efficiency to give glare free light at light source incl integrated electronic driver complete all as specified and directed.

S&F in repair Square shaped surface suspended mounted environment friendly new generation asthetically ultra modern with high brightness LEDs as light source LED Flat panel, 36 watt, 2'x2'size, IP-66 complete with driver and all accessories and including connecting up to with two core copper flexible conductor cable complete all as specified and directed.

S&F in repair LED building security light 25 Watt, 230 V new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with high power LEDs as light source with electronic driver and connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable complete all as specified and directed.

S.K. INFRASTRUCTURE (BID ID -3165932)

Devi Engineeing (BID ID -3170690)

M/s Sati Jasnath Enterprises (BID ID -3162323)

M/s Malinath Electricals (BID ID -3171980)

RAIKA ENTERPRISES (BID ID -3170652)

M/S Tanisha Traders (BID ID -3166148)

AMBEY MAA CONSTRUCTION COMPANY (BID ID -3171587)

DEVARAM CONSTRUCTION COMPANY (BID ID -3166340)