REPAIR TO RCC CHAJJA, ALUMINIUM FITTING, CERTAIN IN PETTY REPAIR, WALL TILES, PLASTERING, FLOORING, JOINERY, PATHWAY ETC IN MD ACCN AT AF STN GURGAON UNDER GE P AF GURGAON

Amount

Schedule-A

Demolition in cement concrete/semi dence bitumen surface in any description and any position not other wise specified and provided as in ground floor and paving nexc. 15 cm thickness ( below above ground floor ) all as directed by Engr-in-Charge.

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc. complete all as specified and as directed by Engr-in-Charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 3 here in before but except bricks Note:- Serviceable bricks obatined from srl item No. 2 shall be re-used in srl item No. 3 after cleaning etc complete all as specified and directed by Engr-in-Charge.

Demolition of RCC as in slab, beam, chajja (other than ground floor) beams staircases,and similar complete all as specified and as directed by Engr-in-Charge.

M&L for Reinforced cement concrete nominal mix 1:1.5:3, type A-1, as in chajjas and similar works complete all as specified and as directed by Engr-in-Charge.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 sqm n exc 4.00 sqm each without taking of shutter from the frame all as specifed and directed by Engr-in-Charge.

Taking down shutter of any discription n.exc 1Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any discription exc 1Sqm and n exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.

M&L for polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl powder coated aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, anodised aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board/ DG grill to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge (Make of aluminium section shall be hindalco/Jindal and equvalent)

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. Make. Anchor/Kitply/Novapan

S&F aluminium anodized grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge.

S&F polyester powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of 16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyster powder coated of any colour podwer coated aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing powder coated anodised aluminium snap beading, screw, powder coated aluminium fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Nos complete all as specified and directed by Engineer-in-Charge.

S&F in repair ISI marked hydraulically regulated door closer die cast body type complete suitable for door shutter width upto 1.50 mtr and weight between 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.

M&L for polyester powder coated aluminium fixed as wall partition medium weight aluminium section as Horizontal members size 63.5x38.10mm at 0.75 Kg/M C/C spacing shall not exceed 900mm Vertical member size 63.5x38.10 mm at 0.75 K/M C/C spacing shall not be more than 900mm. Bottom portion -3' height portion, pre laminated board 12mm thick including necesary clips, rubbers beading aluminium beading and fixing to the adjoining/ existing wall/partition etc with all necessary fitting/ fixtures etc complete all as specified by Engr-in-Charge. Make JINDAL/ HINDAL/ INDALCO Note:- Glass and prelaminated board to be paid and measured separately under appropriate item of sch A)

M&L for polyester powder coated aluminium sliding cupboard shutter panel meduim weight aluminium section as Horizontal members size 63.5x38.10mm at 0.75 Kg/M and verticle member size 63.5x38.10 mm at 0.75Kg/M cupboard panel incluing clips, rubbers beading aluminium beading and sicing to the adjoining/ existing wall/ partition etc with all necessary fitting/ fizture etc complete all as spectified by ENgr-in-Charge incl aluminium frame/ chowkhat for sliding door shutter cupboard of section 101.0x44.44 mm of gauge 16 fixed to masonery/concrete surface (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) including powder coated aluminium fittings such handle (1 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, powder coated aluminium snap beading screw, Steelness steel hinges 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured and paid separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge. Make JINDAL/ HINDAL/ INDALCO

M&L for second class Hardwood 35 mmthickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and as directed by Engr-in-Charge.

S&F factory made 30mm thick solid core Flush door shutter with block board with BWP plywood on both side complete all as specified and as directed by Engr-in-Charge.

M&L second class hardwood 35mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer all as specified and directed by Engineer-in-Charge.

Preparation of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint over one coat of pink wood primer all as specified and directed by Engineer-in-Charge.

S&F stainless steel bright polished bow handle solid type 150mm grip length fency type complete all as specified and directed by Engr -in -charge.

S&F stainless steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified and directed by Engr-in-Charge.

S&F 100mm long medium grade stain less steel but hinges bright polished fix with nut and bolt complete all as specified and directed by Engr-in-Charge.

S&F 300mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt all as specified directed by Engr in Charge.

S&F as in repair 18mm thickness prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by Engr-in-Charge.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed by Engr-in-Charge.

M&L in repair for 2nd class hard wood plain beading rectangular or triangular in section, clean sawn, se-cured with nail not exc 3 Sq cm all as specified directed by Engr in Charge.

M&L for pre cast Kerb stone with plain fair faces 300x150x300 mm depth of PCC 1:1 ½ :3 of shape as approved incl all excavation, embedding in ground and removing surplus spoil upto 50 Mtr distance incl removal of existing completed all as specified and as directed by Engr-in-Charge.

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land complete all as specified and as directed by Engr-in-Charge.

M&L for 18-20 mm thick machine cut Kota stone slab flooring over and including 15mm thick in CM 1:4 cement screed bed and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing mirror type finishes complete all as directed by Engr-in-Charge.

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 600x300x7mm or 450x300x7mm 300x300x7mm size as in walls set and jointed in neat cement slurry over 10mm thick in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting / dado etc all as specified and as directed by Engr-in-Charge.

M&L Chequered cement concrete tiles 300x300x20mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge.

M&L for 60 mm Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strenth not less than M-35 incl 25mm thick sand cushioning complete all as specified and as directed by Engr-in-Charge.

M&L for 60 mm thick outdoor quarry cobble tumbled delhi quartz for parking,lobby and path and similar work etc multi colour and any size and design will be furnished by Engr-in-Charge including 15 mm thick screed bed in cement mortar in 1:4 all as specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete fan cobble arc block/ paver in multicolour machine pressed glazed, set jointed and pointed/groove in near cement slurry in floors with white cement and pigments , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent complete all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick cement concrete type B-2 1:2:4 using 40mm graded crushed stone aggregate as in path/floor finished fair even and smooth without using extra cement, laid in alternate panels of size not exc 4 sqm each complete all as specified and as directed by Engr-in-Charge.

M&L for machine cut broken stone or boulders of gauge not exc 63mm as in hard core N EXC 150mm thick spread and levelled including watering & ramming all as directed by Engr-in-Charge.

M&L, for providing 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick in cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in Plinth protection including 6x10mm grove in every 3Mtr including bitumen mastic filling complete all as specified and directed by Engr-in-Charge.

Taking down cement Plaster, any description on Brick Walls or on concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick in CM (1:4) on brick work or concrete surfaces, finished fair & even w/o using extra cement in patches with water proofing compound(water proofing compound paid sepratelly in item) all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM (1:4) on ceiling or concrete surfaces, finished fair & even w/o using extra cement all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed by Engr-in-Charge.

M&L for preparation of new plaster surface on wall and applying two coat of acrylic emulsion exterior paint over a coat of primer all as directed by Engr-in-Charge.

M&L for Preparation of new plaster surfaces of ceiling, and applying three coat of white wash on ceiling all as directed by Engr-in-Charge.

Dismantling asbestor cement (corugated, semi corrugated etc) sheet in roof covering complete all as specified and directed by Engr-in-Charge.

S&F Asbestos cement 6mm thick corrugated or semi-corrugated sheets in roof firxed with L-type or J-type crenked hook bolts all as directed by Engr-in-Charge.

S&F Asbestos cement 6mm thick in two pieces adjustable plain rich fixed wirth l-type and J-type hook bolts all as directed by Engr-in-Charge.

S&F in repair venetian blinds for windows/door/ventelator of any colour and pattern as approved including connected items ie. rod, hook etc and complete fitting all as specified and as directed by Engineer-in-Charge.

All as per item No 57 here-in-before but verticle bilinds only except top railing complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated brass pillar taps 15mm bore long body cast copper alloy fancy type complete all as specified and as directed by Engr-in-charge. Hindware/Jagaur/ Marc.

S&F in repair chromium plated brass bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed downincluding fixed in repair all as specified. Make : Jagaur/ Marc/Hindware.

S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets . Make prayag/ Skakti/ Hindustan/Cera.

S&F in repair PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair angle/ stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75 mm dia fancy type shower roses brass chromium plated with C P arms of length upto 60 cm for 15mm bore GI pipe. complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

S&F in repair Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

Note The amount of Rs 80630/- against Schedule of Credit on Page No 132 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

NAVREET CONSTRUCTION

M/S ujjwal associates

Phogat Builders