REPAIR/MAINT TO PLUMBING, SANITARY FITTING AND MISC. B/R WORK IN ZONE-06, 9A AND 9B IN TALBEHAT MIL STN

Amount

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for rendering in cement mortar (1:3) 10mm thick as in ceiling surfaces finished even and smooth complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.

M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M&L for preparation of surface 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified and directed

M&L for preparing plastered or unplastered old surfaces on ceiling applying one coat of white wash complete all as specified and directed.

M&L for preparing of surfaces of walls, pilasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of oil bound distemper in any colour complete all as specified and directed.

Description same as per above item but applying subsequent coat of oil bound distemper on walls complete all as specified and directed.

M&L for preparing of surfaces of walls by washing rubbing down & stopping of painted surfaces and applying one coat of cement base paint, in any colour complete all as specified and as directed.

Description same as per above item but applying subsequent coat of cement base paint on walls complete all as specified and as directed.

M&L for preparation of plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed.

M&L for preparation of plastered surfaces of wall and applying Subsequent coat of weather proof exterior emulsion paint all as specified and directed.

M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enamelled complete all as specified and as directed by Engr-in-Charge

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.

M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.

M&L for coloured Glazed ceramic tiles 450 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

M&L for machine cut Kota stone slab of size 550mm x 550mm flooring 20-25mm thick over and incl 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting , grinding rubbing and polishing complete all as specified.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) plaster & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid / bedded and pointed in any mortar.

M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Moulding as In edge of granite platform complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item above but 20 mm bore

All as per srl item above but 25 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item above but 20 mm bore

All as per srl item above but 25 mm bore

M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleaning, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc.

All as per srl item above but 20 mm bore

All as per srl item above but 25 mm bore

M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets, Waste coupling 32mm of PTMT (half or full threaded) (Minimum weight 32mm 45gms),waste pipe complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets with pedestal, CP waste coupling 32mm ,waste pipe complete all as specified and directed.

S&F in repair Oval shape WHB size 560 x 410mm of including brackets, including CP waste coupling 32mm,waste pipe complete all as specified and directed.

S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

S&F in repair Chromium plated jet spray plated, with one meter long flexible pipe complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as spd & directed.

S&F in repairs grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe complete al as spd & directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.

Demolition of cement concrete (unreinforced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

S&F in repair One piece ceramic floor mounted western water closet white with soft close seat cover including flush tank, trap and all fittings complete all as specified and as directed, Note:- The size, colour, design and Make shall be Approved by Eng-in-Charge.

S&F in repair for health faucet chromium plated, with hose &hook Make:- parryware, prayag, Jaquar

S&F Half/quarter turn chromium plated 15 mm bore wall mixture 3 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as spfd & directed , Make:-Parryware, Hindware, Jaqur.Prayag

S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union all as spfd & directed by Engr-in-charge.,Make:- Parryware, Hindware, Jaqur.Prayag

S & F in repair 15mm bore light angular stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Parryware , Hindware ,Prayag, Jaquar

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.Make : Parryware , Hindware ,Prayag, Jaquar

S&F in repairs Chromium plated nipple size 15mm x 50mm for iron pipe and fixed complete all as specified & directed.

S & F in repairs 15 mm bib taps standard of PTMT any colour high pressure screwed for iron pipe ( minimum weight 90 grams) complete all as specified and directed

S & F in repair 15mm bore pillar tap, foam flow with flange, Half Turn/ Quarter turn, fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Make : Parryware , Hindware ,Prayag, Jaquar

S&F Half Turn / Quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with 450 mm flexible hose for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed. Make : Parryware or Hindware , Prayag or Jaquar

S&F in repair brass chromium plated towel rail 20mm dia D type 60cm long between flange all as specified and directed by Engr-in-Charge

S&F in sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed by Engr-in-Charge

S&F in repair chromium plated corner shelf complete all as specified and directed by Engr-in-Charge Make:- Parryware or equivalent in specified makes

S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X330mm x160mm complete al as specified and as directed

M&L32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as spfd and directed.

S&F in repair bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge.

S&F in repair bevelled edge looking mirror 5.5mm thick of any size mounted on mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd and directed by Engr-in-charge.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed

Dismantling water tanks of capacity exc 500Ltr and n.exc 1000Ltr and removing to store

S& F rotational moulded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.

S&F rotational moulded polyethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I complete all as spd & directed.

S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as spd & directed.

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as spd & directed.

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as spd & directed.

S&F in repair tubular depary rod 20mm dia aluminium with including fixing brackets complete all as specified and directed.

S&F decorative type knobs with bracket of MS powder coated fixing at end of pelmet rod complete al as spd & directed.

S&F in repairs Toilet paper holder of chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M & L for 15mm thick plastering in cement mortar 1:3 on the faces of brick work or concrete surfaces with out using extra cement and mixed with liquid water proofing compound in vertical and bottom surface complete all as specified and directed. Note:- Liquid water proofing solution should be provided in 150ml in 50Kg cement by weight and the water proofing solution supplied and paid separate items complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with water proofing compound as per manufactures instruction on bottom up sunken portion with proper slope towards spout/spouts. Complete all as specified and as directed.

M&L of water proofing treatment to sunken floor complete all as specified and as directed with following course of description below: (a) Applying one layer of cement slurry @ 0.688kg/Sqm mixed with acrylic based polymer modified chemical composite compound coating @0.253Kg/Sqm of make of approved in manufactures instruction and the allowed as cure for 4 Hours. (b) Second layer of cement slurry @0.240Kg/Sqm mixed with acrylic based polymer modified chemical composite compound coating @0.120Kg/Sqm and be allowed to a cure for 4 Hours. to following with max curing and testing for leak proof by ponding for 72 hours.

M&L for PCC 1:5:10 type E-2 as in foundation, sub base of floor and mass concrete using 40 mm graded stone aggregate.

M&L for 50mm dia GI pipe as in spout to drain out if any leakage occurs in the sunken portion complete all as specified and as directed

Supply only liquid water proofing compound

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed all as spd & directed.

S&F in repair Stainless steel Magnetic door catcher size 5.08x2.54x2.54 cm with plate completed all as spd & directed.

Hacking out old broken glass and S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden window fixed with wooden bead and pin tacked complete all as specified and directed.

Hacking out old broken glass and S & F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.

S&F 0.9 to 1.5m bottom door seal brown Aluminium frame 38 to 45mm width all as specified and directed

S&F in repairs 18/19mm thick prelaminated particle board, interior, grade prelaminated one side with decorative choice lamination and other side balancing white , including teak wood lipping 19 x 6mm thick fixed with nails in shelves,shelves,cup board shutter and similar works all as specified and directed.

S&F continuous (Piano) hinges, brass finish of when open 30mm width of flaps complete all as specified and as directed

M&L for IInd class H/W Plain , Solid , Straight chowkats and frames sec area n exe 40 sqcm complete and all as specified..

S&F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

S&F 75mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white or colour to make kitchen cabinet/ drawer shutters complete as per specifications and as directed by the engineer - in - charge. Make:-Rajshri or equivalent

S & F in repairs 12 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.

S & F in repairs 6 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.

S & F auto closing hinges 35 mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed Make:- KAFF or equivalent

S & F Ball bearing runners 45 mm (length 20" to 25") Telescopic , full extension load capacity 50 kgs complete all as specified and as directed Make:- KAFF or equivalent

S & F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and as directed.

S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.

Repair to wooden window, Door including necessary riveting, easing drilling and replacement of unserviceable hanging device, and making them in serviceable condition complete all as specified and directed.

Repair to steel window including necessary welding, riveting, easing drilling and replacement of unserviceable hanging device, and making them in serviceable condition complete all as specified and directed.

Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete.

M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc complete all as specified and directed.

M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.

S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc .complete all as specified and directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed.

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.

S&F PVC bend/ shoe of dia. 110mm complete all as specified incl. taking down old unserviceable complete all as specified.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S A.R BUILDERS

HARNAM SINGH ANIL SINGH

M/S Ritu Tandon