Renovation of toilets and other miscellaneous civil works etc. at Anushaktinagar, Mumbai.

Amount

ABSTRACT SHEET

PART - I

Description of Work / Item(s)

Amount

PART - I

Earth work excavation (Only Manual) in foundation pits, trenches, walls, etc. in all soils other than soft and hard rock depths mentioned below including shoring if necessary, dressing the sides, trimming, ramming and preparing the bed for foundation and re-filling around the foundation and in plinth with excavated earth, in layers not exceeding 150mm thick and disposing of the surplus earth within a distance of 500 m including spreading and levelling with all lifts etc. complete as per specifications, drawings and as directed by the Engineer-in-charge.

Depth not exceeding 1.50m from ground level.

Depth exceeding 1.5m & upto 3 m from ground level

Depth not exceeding 1.5 m from ground level

Depth exceeding 1.5m & upto 3 m from ground level

Providing and laying dry rubble stone hard core soling of following consolidated thickness in subbase to floor and below foundation to required levels and lines with first quality rubble, handset, well packed including providing and filling the interstices with smaller stone chips, of approved quality supplying & finishing / blinding the surfaces with approved blinding quality murrum/stone dust including watering, consolidation etc. all complete as per specification drawings & as directed by Engineering Charge. Note:- The smaller stones for filling interstices and murrum/stone dust shall be supplied by the contractor.

150 mm consolidated thickness.

230 mm consolidated thickness.

Cement Concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm maximum size including machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete all as per specifications, drawings & as directed by the Engineer in Charge.

Concrete of Mix 1 : 3 : 6

Concrete of Mix 1 : 2 : 4

Concrete of Mix 1 : 1.5 : 3

TMT bars Reinforcement including supplying steel bars of various diameters as required at site of work including loading, unloading, transporting, decoiling, straightening, cutting, bending placing in position and binding with 18 gauge, soft drawn annealed steel binding wire including carrying out various tests as required etc. all as per specifications, drawings & as directed by the Engineer in charge. Note:- Cost of binding wire shall be borne by the contractor & shall not be measured for payment.

Providing, erecting, fixing in position striking /removing and cleaning steel / timber shuttering & centering for form work in foundation, plinth or tie beams, lift pits, cable trenches, electrical pits etc. at all locations for all geometrical shapes in plan, curved surfaces of structural / RCC elements including chamfers, splays, keys, wedges, props, rails, bracings, brackets, cutting holes for pipes etc., providing & applying approved form oil on all surfaces of form work coming in contact with concrete including close hacking of all exposed concrete work after removal of form work, all materials, labour etc. complete as per specifications drawings and as directed by the Engineer-in-charge. Notes :- a) Area of form work in contact with concrete shall only be measured for payment & stop boards for construction joints etc. will not be measured for payment. b) The rate for formwork shall include all type of structural/ RCC elements and all geometrical shapes including circular and any other curved surfaces. c) For double/ multi stage shuttering design calculations and details / drawings for scaffolding shall be submitted by the contractor well in advance. Prior written approval of form work shall be obtained from Engineer in Charge, before commencement of work. d) Nothing Extra Shall be entertained for revision in drawings.

Brick masonry work for wall including foundation work using well burnt bricks from approved lot, of class designation 3.5 (classification as per IS1077-1992 and min. average compression strength not less than 3.5 N/mm2 ) in C.M 1: 6 to correct line, level and plumb including raking out joints / simultaneous flush pointing with cement mortar 1:4, curing etc. Complete as per specifications, drawings and as directed by Engineer in charge. Notes for brick masonry:- i) The rate shall include cost of making the brick masonry to all geometrical shapes and sizes without any extra cost to the Department. ii)The contractor shall get approved the samples of bricks from the Engineer-In- Charge before procurement on large scale and shall maintain the same for the entire work iii) Necessary openings, nitches, cut-outs, wherever required as per drawings and asked for by the Engineer-In-Charge, shall be provided by the contractor without any extra cost.

Sand faced external/ internal cement plaster as specified below in Ready Mix Mortar 1:4 using RMM at all heights and locations including scaffolding, preparing the surfaces, finishing and rendering with sponge to correct line, level and plumb, curing including making grooves, vatas, plaster fluting (plaster in steps) etc. where ever required complete as per specification and drawings and as directed by the Engineer in Charge.

20 mm thick in two coats for brick/concrete surfaces (external / internal) (backcoat and finishing coat of 10 mm. thick each)with water proofing agent @ 2% by weight of cement.

Making various moulds / bands (projections from plaster) of sizes upto 100 mm wide and 20/25mm thick in curve/square shapes around circular/rectangular columns in C.M. 1:3 as specified below, in proper line, level, shape and design as shown in the drawings and as directed by the Engineer-in-Charge. Note : The cost of GI wire mesh used here will not be paid seperately.

12 mm thick in Single coat

Painting plastered / concrete surfaces with two coats of exterior grade acrylic emulsion paint of approved colour and shade over a coat of approved cement primer including all as per manufacturer's recommendations and as per the approved sample including providing necessary scaffolding, cleaning the surface with water to remove all coating, dust, filling up cracks & crevices with approved putty, curing the surface etc. complete as per specifications and as directed by Engineer in Charge

Providing, laying and fixing in position at all floors and levels machine cut, machine polished natural granite stone of approved colour of 18mm thick granite stones of approved quality and of Black/Red Multicolour/White or any other approved shade for flooring, skirting, cladding, treads , risers, tree guard top etc. on brick/ concrete surface etc., with polished granite stone of required sizes fixed with MYK Latricrete-335 multipurpose adhesive or equivalent over the necessary mortar bedding/ backing coat, close jointed and grouted with matching cement slurry mixed with suitable pigments including fixing approved stainless steel cramps / pins at suitable intervals and approved adhesive such as araldite to ensure fixing of stone securely including making necessary recess in the granite to accommodate the hold for cramps / pins and approved quality adhesives to ensure the fixing of stone securely grouting the joints with approved pigments, curing, cleaning, rounding of edges, wastage and final hand polishing etc. complete all as per specifications, drawings and as directed by Engineer in Charge.

Providing, laying and fixing in position 20 mm thick machine cut, Factory Dressed natural ROCK face tile cladding in required sizes, shade, shape and pattern in plain/curved or any geometric shape of approved quality & colour in wall cladding at all location fixed with MYK Laticrete 335- Multipurpose adhersive or equivalent over 12 mm thick cement mortar backing of mix 1:3 (1 cement : 3 coarse sand) including providing and fixing with required stainless steel pins / clamps / dowels,drilling holes, making notches etc. for securely fixing with cram / pins to wall including grey cement slurry/paste and grouting the joints matching colour including rounding the (edges in semicircle) exposed edges, wastage ,polishing all exposed faces etc.complete.as per specifications and drawings and directed by Engineer-in-charge.

20 mm thick machine cut, Factory Dressed natural ROCK face tile cladding in approved pattern, size & shade

Providing & fixing in position following size Weep holes wherever required in RCC /Masonry walls including cutting to required shape & size all as per specifications, drawings & as directed by the Engineer incharge, all complete.

75 mm dia PVC pipes

Fixing of mineral stones as per approved pattern with M/s MYK laticrete-335 multipurpose adhesive on granite surface or equivalent and applying colourless protective weatherproof coating on stone complete all including local transportation, cleaning, lifting, dressing, washing etc complete all as directed by EIC.

Designing, providing, applying Artistic Writing work using approved acrylic paints over the plastered surface/ stones including all as per approved text / Design including application of colourless protective weatherproof coating, necessary scaffolding, base coat of acrylic water proof paint, cleaning the surface, filling up cracks & crevices with approved putty, curing the surface etc. complete as per specifications , drawings and as directed by Engineer in Charge

Providing and applying synthetic plaster finish paint "Renovo/Durashield/RUF & TUF of Sherwin Williams[BJN Paints]/ Chemtex or approved equivalent paint over plastered surface by applying one coat of approved coat of ASP as per manufacturer's specification by trowel and applying Two coats finish of approved colour and shade on specified locations internal /external surface in plane, curved / any geometric shape as recommended by approved manufacturer, to perfect line, level, plumb including finishing with sharp edge at corners, nitches etc. all as per manufacturer's recommendations and specification or as directed by EIC, including all labour materials, scaffolding, double height staging, if required & surface preparation etc. all complete at all heights, leads, location and lifts as specified in drawing and as directed by the EIC.

Providing and fixing Inauguration stone of required size made out of Jet black granite stone including fixing in position with MYK Latricrete-335 multipurpose adhesive or equivalent & engraving of golden letters as per approved text complete all as per specifications, drawings and as directed by Engineer in Charge.

Providing and fixing Hydraulically pressed factory made Kerb stones from approved manufacturer's M/s.Super Tiles or Other equivalent , made up of Cement Concrete of grade not less than M:30, and having size 500 x 325 x 125 mm, of approved design, fixing with ready mix CM 1:3, jointing and pointing in ready mix CM 1:3 etc. including 250 mm wide and 75 mm thick PCC 1:2:4 and painting with approved shade & colour synthetic enamel paint coat over a coat of primer etc.,complete as per specification and as directed by EIC.

Providing random rubble masonry with rough dressed hard stone below plinth in foundation, plinth, retaining wall, tree guards, sitting etc. in cement mortar 1:6 including through stone, header stone, bond stone, quoins etc. well packed including filling the interstices with smaller stone chips, striking, raking out joints & finishing the joints, including scaffolding, curing etc. all complete as per specifications, drawings and as directed by the Engineer in Charge.

Structural steel work in frames, covers, using angles, tees, flats, bars , chequered plates,inserts fabricated out of mild steel bars, ISMC,ISMB, ,angles, pipes , plates and diaphram plates for expansion joints etc. of all shapes, sizes including supplying, cutting, fabricating, welding, erecting, making holes/chases wherever required and fixing/embedding in position in concrete/brick work with necessary hold fasts/ screws & rawl plugs and finishing the concrete/ brick work after fixing /embedding including painting two coats of anticorrosive bitumastic paint on all unexposed surfaces and two coats of synthetic enamel paint of approved make and colour on all exposed surfaces over a coat of approved steel primer etc. complete as per specifications, drawings and as directed by the Engineer in charge.

Painting over the existing/old structural steel frame, cover ,fencing etc. with two coats of synthetic enamel paint in black/gold/other approved colour of approved make over a coat of approved steel primer etc complete as per specification, drawings and as directed by EIC

Supplying, staking and spreading good quality red garden soil of approved lot free from stones, pebbles, etc. required for plants, lawn etc. at the site including all leads, mechanical trasportation etc. completed as directed by Engineer-in-charge Note :- Measurement will be as per truck body dimensions without any deduction of any voids.

Providing and laying in position Grossy reflective finish precast hydraulically pressed Heavy Duty smooth finish concrete designer tiles of 30 mm thick of M/s. Super Tiles or M/S Basant beton of requird size, pattern & colour(s) in flooring, ramps/ footpath laying of tiles overand including 20 mm thick cement mortar bedding of 1:4 mix, close jointed,grouting/double grouting of joints with matching cement slurry, finished to level, slope & plumb as required, curing including cutting of tiles as required, wastage etc. including finishing top with two coats of lacquer finish etc. complete all as per specifications, drawingsand as directed by the Engineer in Charge.

Providing and fixing 60 mm thick (min) factory made Grossy reflective finished interlocking paver blocks (grade of cement concrete M- 35) of approved colour, shade, size & shape including supplying & laying stone dust evenly spread over the sub base of required thick including consolidation of sub base, properly vibrating with the surface vibrater, finishing to line, level and slope, finally filling the joints with fine clean sand and cleaning the surface and including removing existing Shahabad stone / paver block and storing serviceable material and disposing off debris and unserviceable materials outside colony etc complete all as per specifications and as directed by the Engineer in charge.

Providing and fixing 80 mm thick factory made Grossy reflective finished interlocking paver blocks of approved make, colour, shape laid in pattern manufactured with cement concrete grade not less than M-40, including supplying & laying 50 mm thick stone dust evenly spread over the sub base including preparation & consolidation of sub base, and vibrating the paver block surface with surface vibrator, finished in line, level and filling the joints with fine sand and removal of excess sand, cleaning the surface complete all as per specifications and as directed by the EIC.

Providing and laying Heavy duty outdoor/exteriro grade Vitrified tiles of approx size of 400 mm X 400 mm of first quality of M/S H&R JHONSON (INDIA) Ltd or M/s Kajaria or other equivalent approved make of approved colour, shade, pattern and of 12mm thickness or as per manufacturer's specifications, fixed over 20 mm thick backing using ready mix cement mortar 1:3, close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage and final cleaning of surfaces as required, curing etc. complete all as per specification, relevent IS code & as directed by the EIC.

Providing & laying flooring / skirting with antiskid Vitrified tiles of first quality Endura of M/S H&R JOHNSON (INDIA) Ltd or M/s. Pavit or as approved equivalant of size 600 X 1200/600 x 600 x 10mm & 15/16mm thick in required pattern and combination of series & Colour or as per manufacturer's specifications, laid directly over tile using polymer cum cement based adhesive manufactured by Roffe construction – NSA (non skid adhesive) or M/s Ardex Endura chemicals– Gold star or other approved equivalent make/removing existing flooring and fixing new flooring using 20 mm thick c.m. bedding with necessary cement slurry of required consistency under and over cement mortar bedding in respect of flooring and fixed over 12 mm thick backing cement mortar 1:4 (Using factory made Ready Mix Mortar only) in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out wherever necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing, etc. complete all as per specification, drawings,relevent IS code & as directed by the Engineer-in-charge. Note: 1. Pattern and design of flooring/skirting/dado shall be approved by the Engineer-in-charge before commencement of work. 2. Major flooring will removing exsting and laying of new flooring on beddeing mortar, no extra payment shall be consider for additional thickness of beding moratar due to unevenness of existing floor.

a)In flooring with 10mm thick or as specified

b)In dado / Skirting Tiles of size as specified in 10mm thick including removing existing entire paint, plaster upto the brick work/concrete surfaces and new replastering in CM 1:4 (using factory made ready mix mortar only) and fixing of dado tile with polymer cum cement based adhesive as mentioned above.

c)In flooring with 15/16mm thick or as specified

d)In dado / Skirting Tiles of size as specified in 15/16mm thick

Providing 3 mm thick and 8/10/16 mm deep grout line using PVC spacers for creating true alignment and gap between vitrified tile flooring & Skirting at a specified places as per drawings / as directed and grouting the joints with matching cementitous tile grout mixed with approve tile additive of M/s. Roff Construction or approved equivalent including cleaning the surface etc complete all as per specifications and as directed by the Engineer-In-Charge.

Providing & laying at all floors & levels first quality ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JOHNSON (INDIA) Ltd. or equivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc.and including removing existing flooring / dado and disposing of debris inside Anushaktinagar colony at the location identified by EIC complete all as per specifications, relevant IS code & as directed by the EIC.

a) In flooring with anti skid tiles of size 300 x 300 mm x 12 mm th ( approx size) Checkered Ivory of Endura tiles of M/s H& R Johnson or approved equivalent with 20 mm thick 1:4 Cement mortar bedding (Using factory made Ready Mix Mortar only)

b) In dado / Skirting with tiles of 300X450mm (Approx size) of Digital HD Series of M/s H&R johnson (India) Limited or approved equivalent fixed over 12 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) backing / fixed directly over existing tile with polymer cum cement based tile adhesive manufactured by M/s. Roffe construction (Non-Skid Ahhesive, NSA) or M/s Ardex Endura (Gold Star) or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivit joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) of Deluxe domal series or equivalent or as directed by EIC , including for making exhaust fan frame work, handles of specified size etc, of approved manufacutres for following types with extruded sections of required series as per drawing of Jindal / Indal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters(including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC.

Providing and fixing following thickness of clear float/ frosted / Bajara sheet glass of M/S Triveni/ shree vallabh/ IAG/Modi guard/ Saint Gobin or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way EDPM gasketing to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by Engineer in Charge

a) 5 mm thick clear float glass

b) 5 mm thick Bajra sheet glas

c) 3 mm thick Bajra sheet glass for louvers

Providing & laying machine cut machine polished natural stones as mentioned for the followings for kitchen platform topping and facia over and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs, wastages, making cut outs wherever required etc all as per specifications and as directed by the Engineer in charge. Note : 1)Top exposed surface on plan & exposed vertical finished face shall be measured for payment in sqm. 2)Verticals,shelves,platform shall be embedded minimum 25 mm in wall/flooring.

a) For platform top, upto 750mm wide and upto 1800 mm length in single piece consisting machine cut machine polished on one side 30 mm thick cuddappa stone at bottom and mirror polished machine cut 18 mm thick Jet black Granite stone at top fixed with 52 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only), between two stone slabs (Double stone slab sandwitch type) including providing cut out if any, moulding and polishing the edges etc complete .

b) For platform horizontal facia upto 100 mm wide machine cut machine polished on one side 18mm thick Jet black Granite stone fixed with epoxy resin base (Araldite adhesive or equivalent) including round moulding and polishing the edges etc complete.

c) For vertical support of Counter/ platform, consisting of 2 nos 30 mm thick machine cut machine polished on one side cuddapah stone slabs sandwiched between the stones with 20 mm thick CM 1:4 (Using factory made Ready Mix Mortar only) including providing exposed front face upto 100 mm wide vertical facia of mirror polished 18mm thick jet black granite stone on exposed sides with epoxy resin base (Araldite or equivalent) including rubbing and polishing of cut edges etc complete all in line, level, plumb etc.

d) 18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete.

e) 18 mm thick machine cut and single side machine polished Baroda green marble stone for window jamb & bottom of lintel in single piece laid over 20 mm thick 1:4 cement mortar (Using factory made Ready Mix Mortar only) including half round moulding & polishing of exposed face etc complete.

Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:4 (Using factory made Ready Mix Mortar only), 20mm backing & overlapping of 20mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc.and depositing the same at dept store etc. complete all as per specifications, drawings & as directed by the EIC. Note:- 1) All finished natural stones except for floorings shall be applied with araldite or equivalent stone adhesive on back surface ,spreading/splashing of sand particles on adhesive applied surface before a day of fixing of stones. 2) Window jamb, cill & lintel bottom with granite / gren marble shal be mitred / partly mitred joint as directed by Eingineer-In-Charge. 3)Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc shall not be measured.

a) Jet Black Granite Stone

Supplying & fixing 25 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) / M/s. Rajashree plastiwood or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 2 Nos. 100 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent etc complete all as per specification and as directed by the EIC. Note:- 1) The entire door shall be jointless shutter. 2) The sizes shall be approximately 650 mm x 2000mm, however exact dimensions shall be measured at site before manufacturing.

Supplying & fixing in position the following type solid core block board flush door shutters with commercial ply / teak veneer as specified below conforming to IS 2202-latest, with 20 mm thick teak wood lipping alround, fixing shutters in position to existing door frames at all floors by cutting/ planing if necessary including the labour for removing & refixing old fittings & fixtures and for fixing of the fittings & fixtures with wooden packing pieces if necessary with screws, including one coat of approved primer on commercial ply surface etc.including removing existing damaged shutter,fittings and depositing at dept. stores etc. complete all as per specification & as directed by EIC.

a) For Door 38 mm thick commercial ply on both sides

Repairs to damaged RCC structural members at all locations/ floors using polymer modified cementatious mortar, for strengthening the existing RCC structural members using acrylic based polymer and comprising the following operations: 1. Breaking cracked / spalled concrete members along the cracks with plaster, including removing and stacking of all unserviceable material at site,simultaneous transportation and disposed at a location in Anushaktinagar as identified by EIC. complete all as per specifications and as directed by the Engineer-in Charge. 2. Exposing and cleaning the reinforcement thoroughly by light tapping / wire brushing of using strong emery paper and finally by acetone /rust remover of Dr. Fixit / Anuvi chemicals / Fosroc or other eqivalent. 3. Applying a coat of polymer and cement slurry in the ratio 1:1 by volume to the reinforcement bars. 4. Polymer required for the work shall be procured by the Agency from approved Manufacturers Like M/s Astra , M/s Anuvi, M/s Apcotex or other approved equivalent manufacturer confirming to technical requirements as below and the invoices/challans etc to be submitted to EIC for record. Appearance: Milky white Ph- value : 9-10 Specific gravity : 1.055+/-0.005 Solid contents(%w/w)-: 44+/-1 Viscocity at 25 degree C temperature (in sec): 15-20 Testing of the material as per relevant codes at NABL approved third party Lab. is to be done by the Agency for every batch/lot of supply. 5. Bond coat should be applied @ 0.37 ltr./layer/sq.m. 6. Minimum FM of silica sand should be 2.10

Building up with polymer modified cementatious mortar for RCC structural members etc. in layers not exceeding 20 mm in a day (proportion – cement 50 Kg. : Silica sand 125 Kg. : polymer liquid 10 ltrs.) with necessary bond coat (polymer : Cement = 1:1 by volume) for tack coat and also for subsequent layers using polymer including curing, covering the flooring /window with tarpaulins or equivalent covering material to avoid deposition of polymer mortar and cleaning of floor / windows thoroughly on completion of repair work etc. complete all as per specifications and as directed by the Engineer-in-charge. Polymer used for this work in KG shall be measured for payment.

Repainting of old painted surfaces with two coats of acrylic emulsion paint of approved make & shade over two coats ofapproved primer (alkali resistant) consist of thoroughly scrapping oil bound distemper /acrylic emulsion / white wash surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound , applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer carrying out full stucco puttywork , apply two coats of acrylic emulsion paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris inside Anushaktinagar colony at the location identified by EIC etc. complete all as directed by the Engineer-in-Charge.

Repainting of old painted surfaces with two coats synthetic oil bound distemper of approved shade and make over one coat of approved cement primer, including thoroughly scrapping, removal of old paint if any, sand papering & preparing the surfaces, applying approved stucco putty to entire surface to fill up crevices mild depression etc. scaffolding including cleaning of floors, doors & windows etc.& disposing of debris inside Anushaktinagar colony at the location identified by EIC etc. all as per specifications and as directed by the Engineer-in-Charge.

Repainting of old painted wooden/steel surfaces with two coats of synthetic enamel paint using first quality synthetic enamel paint of approved make and shade over one coat of approved wood/steel primer including preparing surfaces, filling with putty scaffolding and cleaning etc. including removing old paint by scrapping, blowlamp etc.complete all as directed by the EIC.

Providing and fixing fly proof stainless steel 304 grade wire mesh of 28 gauge (made out of 28 gauge wire) in the aluminium sliding door / window and clear story window, using wire gauge with average width of aperture 1.4 mm in both directions including providing and fixing of stainless steel screws and washer at maximum distance of 300 mm complete all as directed by Engineer-In-Charge.

Providing and fixing following thickness of clear float/ frosted / Bajara sheet glass/Toughened glass of M/S Triveni/ shree vallabh/ IAG/Modi guard/ Saint Gobin or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way EPDM gasketing to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by Engineer in Charge

a) 8mm thick Toughened Glass

Supplying and fixing heavy duty superior quality fittings , fixtures and fasteners along with necessary CP screws, bolts, nuts, washers etc. as per approved samples. etc. complete all as directed by the E-I-C.,

a) Providing and Fixing Door sliding channel of M/s. Hafale Make including all related fitting Note:- Top & Bottom measure jointly

b) Providing and fixing Cup-board lock of M/s. Victory make

c) Providing and fixing ovel socket

d) Providing and fixing box hinges of M/s Hafale

Providing and fixing 1.0 mm thick decorative laminated sheet of plain /wood grain in gloss / matt finish of approved make with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality,removing and refixing door shutter, cutting, including cutting the shutters at bottom portion as per site condition ,wastage including disposal of debris outside colony etc complete all as per specifications and as directed by the EIC.

Providing and fixing EWC closet suit comprising : a)European water closet with 'P' or 'S' trap similar to Model- Slick of M/s Hindware (Cat No. 20011) make Sanitary ware in white glazed vitreous chinaware b) Solid plastic heavy quality seat with lid similar to M/s. Hindware or approved equivalent and including cost of removing the existing one & disposing of debris inside Anushaktinagar colony at the location identified by EIC etc complete all as per specification and as directed by the EIC.

Providing & fixing approved WHITE Orissa pattern W.C. of M/s. Hindware make model no 20042 (ECO)/20070 (COMFORT) or approved equivalent with 'P' or 'S' trap in white glazed vitreous china ware of size 580 mm x 440 mm conforming to IS, including the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete to the existing finish & disposing of debris inside Anushaktinagar colony at the location identified by EIC etc complete all as per specifications and as directed by the EIC. NOTE: In case of non availibility, other approved make as mentioned in 'Specification for Public Health Engineering Works' may be considered.

Providing & fixing approved quality wash basin of M/s Hindware or other approved equivalant in white glazed vitreous chinaware supported on suitable wall brackets and of size mentioned below, including providing & fixing Jaquar Cat No. 705/709 CP brass waste coupling, including cost of removing the existing wash basin and fittings such as piller cock, inlet connection, stop cock, waste coupling, bottle trap etc.depositing serviceable material at dept store & disposing of debrisinside Anushaktinagar colony at the location identified by EIC etc complete all as per specifications and as directed by the Engineer-in-Charge.

i) 550 mm x 400 mm ( Approx Size ) MARIO Cat No. 10087

ii) Under counter oval shape wash basin of size 560X410 approx.

Providing & fixing approved heavy quality 15 mm dia inlet connection with unions at the ends plastic pipes with brass unions including the cost of removing the existing one etc complete all as per specifications and as directed by the Engineer-in-Charge.

a) size 600 mm long

b) size 450 mm long

Providing and fixing approved quality 10 Ltrs. capacity PVC flushing cistern of Hindware Sleek Fresh with odorizer slot having single flush white colour or approved equivalent with all internal non ferrous fittings, pull chain including P&F inlet PVC connectors of approved make and quality and outlet connections and wall mounted on brackets, including providing and fixing PVC flush pipe Everlas or equivalent of 32 / 40 mm dia. to a length 1.00 M (approximate) and connecting to the flush tank with proper check nut and connecting to the W.C. pan and making leak proof joints etc., including cost of making chases in the wall, floors, removing the existing one depositing to deptt. Stores etc.complete all as directed by the Engineer-in-Charge.

Providing & fixing in position best quality bevelled edge plate Glass Mirror of size 500x350 mm & 6mm thick with marine ply wood back 6 mm thick conforming to IS-710, CP brass cup screws and caps, washers etc. including providing & fixing rawl plug in wall, wooden packing behind the mirror if necessary, reinstating the damages to its original condition etc. and painting the ply with 2 coats of Synthetic enamel paint over a coat of wood primer etc. complete all as directed by the Engineer-in-Charge.

Providing & fixing in position approved quality CP brass Bib tap / Sink tap etc. of 15 mm nominal dia. with IS mark / approved make of following type including providing & fixing GI specials ,wall flanges and fixing to concealed / exposed CPVC / G.I.pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints, rectifying the leaky joints, if any, including cleaning etc. complete all as per specifications and as directed by Engineer- in- Charge.

a) C.P brass Bib tap with wall flange, .similar to 'Continental series ' of ' JAQUAR' Cat. No. 047

b) C.P brass long body Bib tap 2 in 1 similar to . FLORENTINE Series' of ' JAQUAR' cat. No. 5041 including providing and 'fixing Health faucet with 1.0 mt long flexible tube and wall hook( JAQUAR make Cat. No. 573)

Providing & fixing in position 15 mm diameter CP brass Stop Cock / Angle cock confirming to IS / approved make fixing the cock in position with white zinc and spun yarn, testing the joints for leakage etc. all complete as per specifications and as directed by EIC

i) Angular Stop Cock with wall Flang similar to 'FLORENTINE Series' of ' JAQUAR' cat. No. 5053

Providing & fixing in position following size Bottle Trap of Jaquar Cat. No. 769 with C.P brass extension piece to wall C.P brass wall flanges etc.

a) size 32 mm

Providing & fixing in position 15 mm diameter CP brass Pillar Cock conforming to IS/approved make fixing the cock in position with inlet connection using white zinc and spun yarn testing the joints for leakage etc. complete all as per specifications and as directed by EIC.

a) C.P brass Pillar Cock 15 mm size having similar to 'Florentine' of 'JAQUAR' cat. No. 5011

Providing & fixing in position PTMT fittings of approved quality, make & colour, complete all as per specifications and as directed by the Engineer-in-Charge.

PTMT - Bib cock

PTMT - Stop cock

PTMT - Pillar cock

PTMT - Bottle Trap

PTMT - Urinal Spreader

PTMT - Waste Coupling

Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUPREME / PRINCE/ M/s. Jain Irrigation/M/s. Ajay pipes or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed or concealed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparartion, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prince, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc complete. ( Mode of measurement :- The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded saperately for fittings etc. ) SDR 11 Pipes and Fittings

a) 15 mm n.b

b) 32 mm n.b

c) 50 mm n.b

Providing & fixing SWR PVC Nahani trap of self cleaning design with 75 mm outlet having a minimum water seal of 50 mm with S.S. Grating on top including necessary 1:2:4 cement concrete for embedding the trap etc. complete conforming to relevent I.S. including removing the existing one & depositing to Dept. stores etc. complete all as per specifications and as directed by the Engineer in charge.

Providing & fixing 125 mm dia S.S. grating for Nahani trap with necessary cement mortar 1:4 & matching cement and including removing existing grating, disposal of debris inside Anushaktinagar colony at the location identified by EIC etc complete all as per specifications and as directed by the Engineer in charge.

Providing and fixing Universal water closet suit comprising : a)Universal water closet with 'P' or 'S' trap similar to Model- Slick of M/s Hindware (Cat No. 20012) make Sanitary ware in white glazed vitreous chinaware b) Solid plastic heavy quality seat with lid similar to M/s. Hindware or approved equivalent and including cost of removing the existing one & disposing of debris inside Anushaktinagar colony at the location identified by EIC etc complete all as per specification and as directed by the EIC.

Providing & fixing CPVC Ball Valves of 'SUPREME' make suitable for hot & coldwater conforming to the pipe pressure class,making water proof joints, including the cost of jointing material and CPVC specials if required & testing the joints along with thepipe line etc. complete as per directions of engineer-in-charge.

Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes andfittings ( SWR ) for soil, waste, vent,antisyphonege, HVAC waste pipe and rain waterpipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil /waste pipe as per IS:13592 and IS:14735 Grade-Blaid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clampswith rubber seal of Supreme make Cat. No.SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top ofsoil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to properslope and gradient for making connections of soil /waste water pipe line with inspection chamber orManhole, including the cost of cement mortar,cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement &Rubber ring gasket with making holes in walls /floor grooving and redoing the same and bricksupport etc. Giving water-tightness test for thepipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required lengthincluding short pieces, fittings with & withoutdoor, assorted fittings such as plugs, tees,couplers, reducers, cross tees, reducing tees,elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors etc. For Soil & waste and Vent pipe lines

50 mm dia.

75 mm dia.

110 mm dia.

160 mm dia.

Providing uPVC Gully Trap of 150 X 100 mm size with 100 mm outlet with Grating of approved Make, placing at correct position, embedding in cement concrete 1:2:4, 100 mm thick alround complete.

Constructing brick masonry Gully Trap chamber of following size and upto 600 mm initial depth including providing and fixing gully trap, consisting following items of work:- i) Providing square mouth uPVC gully trap of size150 X 150 mm with 110 mm outlet of ApprovedMake embedding in position in cement concrete1:2:4 inside the chamber.150 X 150 mm with 110 mm outlet of ApprovedMake embedding in position in cement concrete1:2:4 inside the chamber. ii) 230 mm thick brick masonry in 1:4 cementmortar over 150 mm thick cement concrete 1:2:4 iii) 15 mm thick plaster in cement mortar 1:3 oninternal and external surfaces, internal surfacesand top finished with a floating coat of neatcement. iv) Providing and fixing precast EVERLASTComposite (FRP/GRP) Manhole covers & frame ofsize 300mm x 300mm as approved by E.I.C havingpoint loading capacity not less than 0.3 tonne approved, including cost of necessary hardwareand cement concrete / mortar for fixing theframe.

Construction of 300 X 300 mm size Gully Trap chamber including Providing & fixing Gully Trap with frame & cover all complete.

Providing & laying UPVC under ground drainage pipes & Fittings of Approved make for storm water drains & Sewer lines of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with cement solvent /welded joints / as per manufacturer'srequirement, encasing the pipe alround usingcement concrete 1:3:6 complete all as per requirement, encasing the pipe alround using cement concrete 1:3:6 complete all as per specifictions, drawing and as directed by the E.I.C.item includes Providing and fixing UPVC fittingssuch as Bendes, Tees & Y, Reducers, BlankingPlugs, Couplers, Adaptors etc item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc For Sewer line and Storm water Drains

110 mm DN (SN 8kN/m²-SDR34)

160 mm DN (SN 8kN/m²-SDR34)

Constructing brick masonry Inspection chambers of internal sizes 900 X 600mm atbottom and 900 X 450mm at top for an initialdepth of 600mm consisting following items ofwork.i) 230 mm thick brick masonry in cementmortar 1:2 over 150 mm thick bed in cementconcrete of grade 1:2:4 with 150 mm offsetalround, tapering the longitudinal walls to aheight of 450 mm from top of chamber cover toobtain an internal dimension of 900 X 450mmii) 20 mm thick plaster in cement mortar 1:1mixed with water proofing compound @ 2% byweight of cement on internal and externalsurfaces, internal surfaces and top finished witha floating coat of neat iii) Making benching and haunching in cementconcreteof grade 1:2:4 and finishing withfloating coat of neat cement.iv) Fixing frame and cover at top using cement concreteof grade 1:2:4 (for bed block / bearing course andcapping) and cast iron steps / foot rests, all as perspecification and as directed by E-in-C.Making ramp, connecting incoming & outgoingsewers & U-channel (Upto initial depth of 600 mmbetween the inverts of incoming & outgoingsewers) of height and width not less than thebranch pipe dia. in CC 1:2:4, plastering 20 mmthick in CM 1:3, finished smooth with a floatingcoat of neat cement all complete. NOTE:-Providing & fixing foot-rests / steps and CI / RCC /Composite frame & cover, CC of grade 1:2:4, plastering in C.M 1:2 on exposed surfaces of bed block & capping,making smooth cement finish etc. will be paid under relevant item. NOTE FOR INSPECTION CHAMBER & MANHOLE i) Depth of Manhole / chamber shall be thevertical distance from the top of the frame &cover of manhole / chamber to the outgoinginvert of the main drain channel. ii) The internal diameter of sizes mentioned inthe item shall be measured from finishedplastered surfaces.iii) 1:2:3 grade concrete for fixing frame & cover the item shall be measured from finished plastered surfaces. iii) 1:2:3 grade concrete for fixing frame & cover( ie., for capping & bed block or bearing course )and CM 1:2 for plastering & fixing shall be paidseparately in relevant item. iv) Slope of 1:6 for benching shall be startedfrom channel of depth equal of the outgoingsewer diameter. v) The slope of conical wall of manhole andlongitudinal walls of rectangular InspectionChamber starts from the vertical height of200mm from top of frame and cover. vi) While making payment for extra over initialdepth, the thickness of RCC frame & cover andthe thickness of cement concrete bed block (bearing course) shall not be deducted from the depth of manhole or chamber.

Inspection chamber of internal sizes 900 mm X 600 mm at bottom and 900 mm X 450 mm at top for an initial depth of 600mm.

Extra over above item for depth beyond 600 mm initial depth & upto a depth of 1800 mm. all as per specification and as directed.

Providing & fixing GRP/FRP Composite frame withCovers / Gratings of M/s Everlast or approvedmake, tested for load designation as per IS:1726 including the cost of 1:2:4 grade concrete for fixing frame, bed block (bearing course) and capping including necessary form work and C.M 1:2 mortarfor fixing the frame & for plastering exposed surfaces of concrete bed block and capping finished smooth floating coat of neat cement etc., complete as perspecifications, drawings and as directed by theE.I.C.

Circular Heavy duty (Grade HD-20 load Designation as per IS:1726) frame and cover clear internal dia. 530mm

Square Heavy duty (Grade HD - 20 load designation as per IS:1726) frame and cover suitable for 300 x 300mm (Clear) valve chambers / Gully trap chambers / drop cleaning chambers etc. Shade and Colour and design pattern to be get approved from Engineer-in-Charge.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with all necessary fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required.

Supplying & fixing of retro reflective sign board of required size using retro reflective sheeting letters written (single side) in white colour, to be pasted on 3mm thick ACP sheet complete all as directed by EIC