Civil Works

Amount

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Kiln seasoned and chemically treated hollock wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Kiln seasoned and chemically treated hollock wood.

Ply wood 5 ply, 9 mm thick Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading

Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.8 mm thick float glass panes fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Kiln seasoned and chemically treated hollock wood 30 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Refixing old glass panes with putty and nails .

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 3.80 mm of approved brand.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

20 mm dia (heavy type)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge.

Providing & fixing anodised aluminum sheet with nail, screws etc where ever required as per direction of engineer-in-charge.

Credit of wooden door/ windows shutter i/c fittings obtained by dismantling etc. and disposal of unserviceable material within 50 m lead etc. of area up to 2.50sqm.

Credit of MS fittings for doors & windows like SDB, TB, Handle, Hinges etc

Credit of Aluminium fittings for doors & windows like SDB, TB, Handle, hinges etc.

Supply of Box type hinges/window fastener for steel windows (50x50 mm) at site all complete.

Repairing of steel windows shutters etc by welding with Electric plant / gas plant including transportation of welding plant at site & other required T&P is to be arranged by Agency. MS sections shall be paid for separately.

Providing / supplying wooden boards in shelves, counters, drawers, wall panelling etc with nail, screws, adhessive, lipping as directedby Engineer in charge etc where ever required but excluding labour cost.

18 mm thick block board (BWP type ISI marked) including lipping and beading on exposed face.

SAI CONSTRUCTION CO