Se/GC/TIN/C55/2019-20

Amount

Supplying ,fabrication and placing in position of MS/GI angle size 65x65x6mm for rafter post and 50x50x6mm angle for roof support of including cutting bending dying, and drilling the holes as directed by the site including transportation ,labour, lead, lift,etc, complete.

Supplying and fixing of Asbestos cement fully corrugated sheet-6mm thick for roofing and side covering including cost of all materials, lapping, "J" or "L" Bolt Nuts & Washer, Transporting safety arrangement lead,lift, scaffolding charges etc, complete.

Paving the approved quality of virtified tiles size 600X600x8 mm over a base layer of Cement mortor 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including of all materials, labour, lead, lift, etc complete as per the direction of Engineer at site.

Supply and run of 4 of 6 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD-70)

Supply and run of 4 of 6Sqmm(84/0.3) PVC insulated SC unsheathed cu.conductor of 1100V on 7/20GI bearer wire for service connection mains.(SD.68)

Supply and fixing of TNEB meter Board suitable for 32A single Phase service connection with 1 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.(SD-125)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connection on suitable angle iron frame work with earth connection only.(SD:174)

Supply and fixing of 8 way single pole and neutral MCB Sheet steel enclosure distribution board 1 No 32 Amps DB MCB as incoming and 6Nos and 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make)(SD-167)

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator) (SD-17)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box (SD-133)

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39)

Supply and fixing of single box type 4'x40 W flu fitting complete with copper choke and condensor,with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD-88)

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clampwith approved ISI quality including all cost of material, labour, etc complete. (SD- 111)

Supply and fixing of 375mm(12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD:114)

Supply and fixing of louvers shutters arrangement for 375mm (15") sweep light duty AC Exhaust fan complte.(SD:121)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent with 12W LED. (SD-80)

Supplying and fixing of 230mm SL Bracket with ISI fancy shade approved by Engineer at site with 1 No. 12 W LED bulb. (SD 82)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD-228)

Supplying and fixing in position of 15/12mm dia brass screw down bib cock of best quality including cost of materials lead lift labour etc complete.

Supplying and laying 25 mm dia PVC pipe 10Kg/m² of approved quality and best make [Finolex or equivalent] including fixing GI specials, including the cost of all materials, labour, lead,lift, T&P etc complete.- 1 RM

Supplying and fixing Stainless steel sink of Size 600mmx 450mm x 200mm with 32mm dia 'B' class GI waste water pipe & 32mm dia C.P waste coupling including cost of materials lead lift labour etc complete.

Colour Washing Two coats using emulsion over one coat of primer after applying putty and through scrapping including the cost of all materials, labour, lead, lift, T&P etc complete.

White Washing one coat with shell based white cement including the cost of all materials, labour, lead, lift, T&P etc complete.

Painting 2 coats of approved quality of enamal paint over a primary coat for new / old steel doors & windows and grill etc including cost of all materials , scrapping, labour, lead,lift etc complete.

Supplying and providing 6 lever best quality lock (Godrej) with keys

GST 12% as per Govt. Norms

MOHIDEEN ENTERPRISES

V NARAYANAN CONTRACTOR

Sp Constructions