Dismantling of One No. Surveyed Off I.R. Make Feeder Breaker S. No. 21 and Installation, Commissioning, Testing and Trial Run of one no. new Black Diamond make Feeder Breaker at CHP of Bellora-Naigaon Deep OCM, Wani Area.

Amount

The bidder to quote rates excluding GST and including PF. The bidders may note this while bidding for this tender.

Dismantling of existing one no. IR Make Feeder Breaker complete with all accessories. (Material+Labour) (DSR Item No. 15.18)

Dismantling of One no. IR Make Feeder Breaker Platform, Discharge Chute, Feeding Hopper and Tippping Shed. (Material+Labour) (DSR Item No. 15.18)

Fabrication of One no. new Feeder Breaker Platform including Feeding Hopper, Discharge Chute, Tipping Shed etc. And applying approved coat of steel primer. (Materia+Labour) (DSR Item No. 10.2)

Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade. (Material+Labour) (DSR Item No. 13.61.1)

Complete Supply and installation of Control Cables (12 Core x 1.5 sq.mm) from Control Pannel to Operator Cabin (Material+Labour)

Earth work in Excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m . All kinds of soil. (Materia+Labour) (DSR Item No. 2.8.1)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Materia+Labour) (DSR Item No. 2.27)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources). (Material+Labour) (DSR Item No. 4.1.5)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering , shuttering, ifnishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Material+Labour) (DSR Item No. 5.1.2)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (Material+Labour) (DSR Item No. 5.2.2)

Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete. (Material+Labour) (DSR Item No. 5.9.1)

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts (Material+Labour) (DSR Item No. 5.9.6)

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilaster, butteresses, plinth and string courses etc.(Material+Labour) (DSR Item No. 5.9.2)

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. (Material+Labour) (DSR Item No. 10.19)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.(Material+Labour)) (DSR Item No. 5.22.6)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Material+Labour) (DSR Item No. 2.25)

Carriage of Earth by Mechanical means including loading /unloading & stacking at places directed by Engg incharge upto lead of 1.00km (Material+Labour) (DSR Item No. 1.0)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (Material+Labour) (DSR Item No. 15.3)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bituminous and G.I. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), including the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m². (Material+Labour) (DSR Item No. 12.1.3)

Installation, Commissioning Testing and Trail run of One No. New Black Diamond Make Feeder Breaker complete with all accessories. (Material+Labour)

Total impact of GST for the purpose of CTC

BLACK DIAMOND TRACK PARTS PVT LTD

UTKAL INNOVATIVES