REPAIR TO FLOORING, ALUMINIUM PARTITION, ROLLING SHUTTERS AT 58SU CHIMNEY HILLS

Amount

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of mortar 1:4.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but n exc 0.38 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer of mortar 1:4.

M&L for glazed ceramic coloured tiles (premium quality) 450x350 or 350x250 x6-7mm thick coloured on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 10 mm thick cement plaster in CM 1 :4 complete all as specified and directed.

Taking down chowkhats or frames with shutters of size exc. 1.5 Sqm but not exc 4 sqm each and removing to store (without taking off shutters from the frames) complete.

Providing & Fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 90mm x 45 mm ( Moulded ) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 850 kg/ cbm having good screw holding capacity of Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 with property of being termite / borer proof , water / Moisture Proof & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, , all as per specifications drawings as directed by the Engineer-In-Charge.

Providing & Fixing Factory Made 30 mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated / Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850N/mm2 with Property of being Termite/ Borer Free, Water/ Moisture Proof & fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron)door shutters, aliuminium section weighing 0..55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2Nos in each door, hinges anodised aluminium snap bedding screws etc complete

S&F in repair Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete.

Supply and fixing in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of perature 1.00mm and fixed with screws or GI staples all as specified and directed.

Taking down hood covers of gear operated rolling shutters of opening width exc 4.00 m and height exc 5.00 m, keeping shutter for repair, cleaning old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels, complete lightening of shutter, strips and other parts, greasing/oiling of all moving components incl springs, minor welding works if required and replacement of worn out/unserviceability or rolling shutter for proper functioning.applying one coat of synthetic enamal paint incl preparation old treared sur face complete all as specified and as directed.

All as per SI item no 11 here-in-before but width n exc 4.00 m and height n exc 5.00 m.

Repair to collapsible steel gates n exc 9 sqm, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners position and securing runners with hold fast and brackets, complete greasing and oiling to movable position and replacing old runners if required. and applying one coat of synthetic enamel paint incl preparation old treared surface complete all as specified and as directed.

Hacking out old broken glass ( any thicknes, size, qualityor description) from metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete.

S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete.

S&F sheet glass 5.0 to 5.5mm thick, ordinary quality fixed with necessary glazing clips and oil putty in square n exc 0.5 sqm in each pane complete.

M&L in repairs for 12mm thick prelaminated plywood interior grade prelaminated on one side with decorative choice lamination and on other side with white fixed to aluminium/wooden frame work, including necessary clips, washers, beading etc complete.

Taking down cement plaster on any description including scrubbing down with water and prepare to receive new plastering.

M&L cement plaster (1:4) 15 mm thick on fair faces of brick work or concrete surfaces even and fair without using extra cement.

M&L preparation of new plastered surface and applying 2 coat cement base paint over a coat of primer complete all as specified.

M&L preparation of old decorated surfaces of wall and applying one coat of white wash complete

All as per item here in before but on ceiling complete.

M&L preparation of old decorated surfaces of wall including cornices and applying one coat of oil emulsion distemper complete.

All as per item here in before but on ceiling complete.

M&L preparation of old decorated surfaces of wall including cornices and applying one coat of cement base paint complete.

M&L for preparation of old painted wooden surfaces and wood based material over 10cm in width or girth of any description and applying one coat of synthetic enamel paint complete.

M&L for preparation of old painted steel surfaces and iron work over 10cm in width or girth of any description and applying one coat of synthetic enamel paint complete.

chowdeshwariconstructionco (BID ID -3239611)

P K CONSTRUCTIONS (BID ID -3243101)

M/S AMRITHESH ENTERPRISES (BID ID -3243119)

LAKSHMI CONSTRUCTIONS (BID ID -3242624)

ANAND REFRIGERATION (BID ID -3243019)

JM Engineering (BID ID -3243285)

Aditya Associates (BID ID -3243757)

s v m construction building & engineers (BID ID -3243228)