Sr.no/B6/sambalpur mandi/00-00/25-26/8805/raipur/26.02.2026

Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).

Excavation for all types and sizes of foundations, trenches and drains orfor any other purpose including disposal of excavated stuff upto 1.5 m liftand lead upto 50m (at least 5m away from the excavatedarea),includingdressing and leveling of pits.1.1.1 In all types of soils.

1.6 Extra for every additional lift of 1.5 m or part thereof. 1.6.1 All types of soils

Providing and laying nominal mix plain cement concrete with crushedstone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mmnominal size).

Providing and laying nominal mix reinforced cement concrete with crushedstone aggregate using concrete mixer in all works upto plinth levelexcluding cost of form work.3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mmnominal size)..

Extra for laying PCC/RCC of any grade in superstructure above plinthlevel for every floor or part thereof in addition to rate for foundation and plinth:

Providing and placing in position reinforcement for R.C.C. work includingstraightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:3.12.1 Thermo-Mechanically treated bars FE 415

Providing and filling in plinth with sand/ Crusher dust and hard moorumunder floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc.complete.

3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work.

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for:2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in anyshape and size and all type of wall below plinth level.

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for2.1.8 Beams, lintels, cantilevers & walls

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for2.2.1.13 Weather shade, chhajja, Cornices and mouldings

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming toIS:12894-2002 of class designation 4.0 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor orpart thereof in addition to rate for foundation and plinth:

Providing and making 6mm thick cement plaster of mix:11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand)

Providing and making 12mm thick cement plaster of mix:11.2.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

total qty/2

Providing and making 15mm thick cement plaster on the rough side ofsingle or half brick wall of mix::11.3.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

14.10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. 14.10.1 On new work (two or more coats)

14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

12.12 Providing and laying vitrified floor tiles with soluble salt printing, of size 600x600mm with water absorption less than 0.5% and conforming to IS : 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

Supplying and fixing rolling shutter of approved makes made of M.S. lathsinterlocked together through their entire length and jointed together at theend by end locks, mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and out side locking with pushand pull arrangement complete but excluding the cost of top cover andspring.9.27.1 80x1.25mm M.S. Laths

Providing and fixing 27.5cm long wire spring for rolling shutters

Providing and fixing M.S. sheet top cover for rolling shutter9.29.1 1.25mm thick

Providing and fixing ball bearing for rolling shutters.

Painting on new work (two or more coats) to give an even shade with:14.22.1 Satin synthetic enamel paint

Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).

Excavation for all types and sizes of foundations, trenches and drains orfor any other purpose including disposal of excavated stuff upto 1.5 m liftand lead upto 50m (at least 5m away from the excavatedarea),includingdressing and leveling of pits.1.1.1 In all types of soils.

1.6 Extra for every additional lift of 1.5 m or part thereof. 1.6.1 All types of soils

Providing and laying nominal mix plain cement concrete with crushedstone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mmnominal size).

Providing and laying nominal mix reinforced cement concrete with crushedstone aggregate using concrete mixer in all works upto plinth levelexcluding cost of form work.3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mmnominal size)..

Extra for laying PCC/RCC of any grade in superstructure above plinthlevel for every floor or part thereof in addition to rate for foundation and plinth:

Providing and placing in position reinforcement for R.C.C. work includingstraightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:3.12.1 Thermo-Mechanically treated bars FE 415

Providing and filling in plinth with sand/ Crusher dust and hard moorumunder floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc.complete.

3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work.

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for:2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in anyshape and size and all type of wall below plinth level.

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for2.1.8 Beams, lintels, cantilevers & walls

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for2.2.1.13 Weather shade, chhajja, Cornices and mouldings

Providing and fixing form work including centring, shuttering, strutting,staging, propping bracing etc. complete and including its removal at alllevels, for 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming toIS:12894-2002 of class designation 4.0 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand) Extra for brick work in superstructure above plinth level for every floor orpart thereof in addition to rate for foundation and plinth:

Providing and making 6mm thick cement plaster of mix:11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand)

Providing and making 12mm thick cement plaster of mix:11.2.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

total qty/2

Providing and making 15mm thick cement plaster on the rough side ofsingle or half brick wall of mix::11.3.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

14.10 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. 14.10.1 On new work (two or more coats)

14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

12.12 Providing and laying vitrified floor tiles with soluble salt printing, of size 600x600mm with water absorption less than 0.5% and conforming to IS : 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

Supplying and fixing rolling shutter of approved makes made of M.S. lathsinterlocked together through their entire length and jointed together at theend by end locks, mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and out side locking with pushand pull arrangement complete but excluding the cost of top cover andspring.9.27.1 80x1.25mm M.S. Laths

Providing and fixing 27.5cm long wire spring for rolling shutters

Providing and fixing M.S. sheet top cover for rolling shutter9.29.1 1.25mm thick

Providing and fixing ball bearing for rolling shutters.

Painting on new work (two or more coats) to give an even shade with:14.22.1 Satin synthetic enamel paint

Asstt-Engineer

Description of items

16.17 Dismantling G.I. sheet roofing including ridges hips, valleys and gutters etc. and stacking the material with 50 m lead.

16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 Metres lead.

16.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. 16.3.3 In cement mortar.

16.42 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead..

16.43 Demolishing cement concrete including disposal of material within 50 metre lead. 16.43.1 1:4:8 or leaner mix

16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.

16.28 Taking out door shutters (steel or wood) including stacking within 50 metres lead.

16.29 Taking out window shutters (steel or wood) including stacking within 50 metres lead.

10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in240mpa steel grade, 5-7 microns epoxy primer on both side of the sheetand polyester top coat 15-18 microns. Sheet should have protective guard Film of 25 microns minimum to avoid scratches while transportation andshould be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

10.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

10.10 Extra for providing and fixing wind ties of 40x6mm flat iron section.0

7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand)7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

11.2 Providing and making 12mm thick cement plaster of mix:11.2.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).

3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

12.25 Extra for providing and fixing 4mm thick glass strip in joints of Terrazo floor/ cement concrete floor or like. 12.25.2 40 mm wide

11.5 Neat Cement punning.

9.27 Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring. 9.27.1 80x1.25mm M.S. Laths

9.28 Providing and fixing 27.5cm long wire spring for rolling shutters.

9.30 Providing and fixing ball bearing for rolling shutters..

9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.

3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: 3.12.1 Thermo-Mechanically treated bars FE 415

2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

11.1 Providing and making 6mm thick cement plaster of mix:11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand)

14.44 Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.

14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: 14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

14.14 Finishing walls with water proofing cement paint of required shade to give an even shade. 14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm)

14.21 Applying priming coat on steel work with red oxide zinc chromate primer.

14.22 Painting on new work (two or more coats) to give an even shade with: 14.22.1 Satin synthetic enamel paint

16.17 Dismantling G.I. sheet roofing including ridges hips, valleys and gutters etc. and stacking the material with 50 m lead.

16.30 Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 Metres lead.

10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

10.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

10.10 Extra for providing and fixing wind ties of 40x6mm flat iron section.0

7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand)

17.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead : 17.1.1 Thickness upto 15mm

14.44 Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.

14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and ecorative finish including cleaning washing of surface etc. complete with: 4.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

9.3 Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 9.3.1 Electric resistance or induction butt welded tubes Grade-250

16.43 Demolishing cement concrete including disposal of material within 50 metre lead. 16.43.1 1:4:8 or leaner mix

1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc.complete.

3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).

3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

12.25 Extra for providing and fixing 4mm thick glass strip in joints of Terrazo floor / cement concrete floor or like. 12.25.2 40 mm wide

11.5 Neat Cement punning.

14.21 Applying priming coat on steel work with red oxide zinc chromate primer.

14.22 Painting on new work (two or more coats) to give an even shade with: 14.22.1 Satin synthetic enamel paint

Asstt-Engineer