Construction of control room building ,providing foundation concrete structure and equipment plinth ,fencing ,road and other related civil works for upgradation of existing Palayamkottai 33 kV SS into 110 kV SS

Amount

Civil works

Clearing scrub jungles and disposed from the site as per the direction of site engineer including cost of all labour ,lead, liftetc complete .

Site grading and levelling and sectioning by earth moving machineries as per the direction of site engineer including cost of all labour ,lead, lift etc complete

Collection, supplying, stacking and spreading & filling of red gravel including compaction,cost of all materials lead lift labour etc complete as per the direction of site engineer.

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5lit of water etc. complete.

Supplying and filling of M. sand in foundation and basement with well water and consolidation as per specn.incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out form work including cost of all labour ,materials,water charges , lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 20mm ( M 20 ) (machine crushed) metal for raft foundation without formwork including cost of all materials,water charges, labour lead, litf, etc., complete.

RCC 1:1.5:3 using 20mm ( M 20 ) (machine crushed) metal for column concrete with formwork including cost of all materials, water charges labour lead, litf, etc., complete. But excliding cost fo steel reinforcement (by using mixer machine).

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) with formwork including cost of all labour, materials, water charges, lead, lift, etc, complete. But excluding cost fo steel reinforcement (by using mixer machine).

RCC 1:1.5:3 using 20mm ( M 20 ) HBS metal(machine crushed) for Grade beam /plinth beam with formwork including cost of all labour, materials, water charges, lead, lift, etc, complete. But excluding cost fo steel reinforcement (by using mixer machine).

RCC RCC 1:1.5:3 using 20mm ( M 20 ) HBS metal (machine crushed) for contineous lintel with formwork including cost of all materials, water charges ,lead, lift, etc., complete.(by using mixer machine).

RCC 1:1.5:3 using 20mm ( M 20 ) HBS metal (machine crushed) for Sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, water charges , labour, leas, lift, etc., complete. (by using mixer machine).

RCC 1:1.5:3 using 20mm ( M 20 ) (machine crushed) metal for " T " beam, bed block with centering shuttering including cost of all material, water charges ,lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1:1.5:3 using 20mm ( M 20 ) (machine crushed) for roof slab concrete of 130 mm thick with formwork including cost of all materials, water charges, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

RCC 1:1.5:3 using 20mm including cost of all materials, form work, centering, curing, all labour charges, water charges , lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone with steel mould, including cost of all materials, form work, water charges ,centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For culvert deck slab concrete with 230mm thick.

Providing concrete road with R.C.C 1:2:4,150 mm thick using 12 to 20 mm metal by using paving machinery with compaction including cost of materials leads and lifts etc.complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, water charges , labour, lead, lift, curing, etc., complete. By using II class Champer Burnt bricks

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour materials, curing, lead,water charges, lift, etc., complete.

PCC 1:2:4 using 20mm HBG metal foundation without form work including cost of cement, all materials,water charges, labour, lead, lift, etc. complete.

PCC 1:2:4using 20mm HBG metal foundation with form work including cost of cement, all materials,water charges , labour, lead, lift, etc. complete.

Labour charges for transporting from casting yard to curing tank,curing tank cable duct , aligning and fixing of RCC pre cast cover slab as directed by the site engineer including all labour lead lifts etc complete

supply,Fabrication, Transport & fixing of GI angles for cable duct with anchorage and placing in position as directed by the engineer at site including cost of angles,cutting and all labour, lead, lift, etc. Complete

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour charges,water charges,, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, water charges, lift, etc., complete.

Supply ,Labour charges for fabrication, fixing in position of MS rail with proper anchorage by using welding and cutting to the required size and length anf fixing over transformer plinth as per departmental specifications including cost of labour, transport, placing in position, lead,lift etc complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, water charges, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, water charges, lead, lift, watering, curing, etc., complete.

Supply and spreading of quarry dust inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Supply and apreading of 20mm of HB stone inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Providing weathering course with good quality of readymade cooling tiles laying over cm 1:3, and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., water charges ,and including cost of material and labour for applying water proof component over the terrace etc., complete.

Providing two coats of white cement based wall putty over the plastered surface including removal of all loosly adhering materials from the wall surface with the help of emery stone,putty blade or wire brush and making the surface in just wet condition as per the specification and approved by the site engineer including cost of all materials, labour, transport,lead etc complete.

Painting two coats with approved quantity White distember over a priming coat, for ceiling surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. Complete

Colour washing two coats with approved qulity of colour pigments over one coat of white cement including cost of all materials , labour lead and lift etc complete.

Painting the inside walls with two coats of interior emulison of approved colour over a primer coat of all materials, etc., complete.

Painting the outside walls with two coats of ''ULTIMA" paint over a white cement primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Supplying and fixing of two side polished 20/30mm tk.cuddapah slab for cupboard, ., including cost of all materials, labour, lead, lift, etc., complete

Providing shoring and shuttering in foundation using wooden planks and scantling including cost of all materials, lead,lifts, labour, etc , complete.

Dewatering charges per hour including hire charges for 3/5 HP Diesel motor with Pump

Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all lead, lift, etc., complete.

Providing inspection chamber for sufficient intervels throughout the line 0.45x0.45m. Size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. cover at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM1:3 12mm thick and all lead, water charges ,lift etc.complete. 0.45x0.45m size to a depth of 0.45m

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Supplying and fixing CI.man hole cover of size for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete 0.45x0.45m CI Man hole cover

Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of pvc pipe coupling lbour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of 110mm dia slotted pvc pipe for dispersion trench with covering with roof pantiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and filling 40mm HBS metal for dispersion trench per standard specification including cost of all materials, lead lift etc. complete.

Supplying and fixing of 110 mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, lead, lift etc. Complete.

Finishing the floor with 20mm thick cement concrete using 3 to 10mm stone chippings (Ellis pattern first sort -no sand to be used) including cost of all materials, labour, lead, lift etc. complete.

Flooring with approved ceramic non-slippery tiles 300x300mm size of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges ,labour, lead, lift, etc. complete

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete.

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -12 mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, water charges labour, lead, lift, etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc including cost of all materials, water charges labour, lead, lift, etc. complete. ( Battery Room )

M&F in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m

M&F in position of anodised aluminiuum fully glazed door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg / M with everite / pioneer, floor gear rubber beedings, hinges, handle & 5mm thick sun cool glass including cost of materials, labour, lead, lift, etc., complete door size 1.50 x 2.10 m single leaf.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work cost of all materials , lead, lift , etc. complete, as per standard specification

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 8mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed or Pin headed/Fluted/Figured glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer befoe use on work and as per specications

Supply and fixing of solid UPVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. .

Providing and fixing sanitary fitting consisting of Neycer/parryware of oriya patten Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.Europian water closet

Supply and fixing of wash basin of size 560x410mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc. complete.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Supplying and fixing of digital wall clock 1 No, floor coir mat 2000x600 for Entrance 1000x500 - 2 No.,towel rod, floor trap, soap tray for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Supply and fixing of 50 Sq.mm PVC COATED GI Chain link fencing of 10 gauge with standard width of 1.80m height including cost of all material, labour for fixing, transportion, lead, lift, etc., complete.

Supply & Fabrication and fixing in position GI/MS angle 75x75X6 mm for corner and intermediate and Supply of MS flat 65X10 mm (angle both side )& GI bolt & nut including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of GI 175x16mm size bolt, nut and washers of required sizes for holding chain link fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Site Engineer.

providing water mixed macadam 1;1 proportion using quarry dust and 40mm metalmixed with machine adding required water for road and bell mouth including cost of allmaterials ,labour,well consolidation with power roller lead,lift,etc complete

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 32 mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete.25mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete.20mmdia.

Supplying and fixing in position of MS grill gate including cost of all materials lead, lift, etc. as per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of enamel paint over with one coat of red oxide.

painting and writing the name of substation in the wing wall both in English & Tamil with artist painter including cost of all material, labour for fixing, transportion, lead, lift, etc., complete.

Providing groutpocket holes includig cost of all labour charges, lead and lift etc., complete.

Supplying and fixing of PVC end cap of 20mm size of approved quality cost of all materials, labour for laying and making holes, lead, lift, etc., complete for water supply arrangements to earth pit.

Supplying and laying 50 mm Dia GI pipe with ISI make including cost of GI pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing inposition of heavy duty wheel valve of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements.. 32mm dia

Supplying and fixing inposition of heavy duty wheel valve of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements.. 25mm dia

Supplying and fixing inposition of heavy duty wheel valve of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements..20mm dia

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.32 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete25 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete20 mm dia GM Gate valve

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead lift, etc. Complete

Wiring with 2x1.5 sq.mm PVC insulated multistrand unsheathed copper conductor cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete.of approved quality (For Electronic regulator)

Supply and run of 2 x 1.5 sqmm (22/0.3) PVC insulated multistrand unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulatedmultistrand unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

wiring with 2 x 2.5 sqmm (56x0.3) PVC insulated multistrand unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x63 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. Complete with PWD earthing

Supply and fixing of 20 W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and fixing of 4'40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for 9 W LED bulb with guard

Supply and fixing of fancy glass shade and 40 W LED bulb for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450 mm.

Supply and fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of RCCB safe trip of appd LEGRAND ,ISI make 25 amps with suitable box including cost of all materials labour,lead, lift, etc complete as per stnd specification .

supply and fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet steel enclosure with40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.The MCBDB and MCB's should be with ISI mark)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and laying of 4 core 6 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Drilling of 150 mm dia borewell from GL in all classification of soils including hard rocks using Power RIG/Hamer RIG, charges for transporting the power Rig to site , operation charges all lead, lifts , labour, etc, complete.

Supplying and fixing 165 mm dia Pvc casing pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of Pvc casing pipe, labour, lead, lifts, etc, complete..

Supplying and fixing 165 mm dia Pvc slotted pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of Pvc slotted pipe, labour, lead, lifts, cost of pebbles and backing of pebbles as per instruction of site engineer etc, complete..

Supplying and fixing of 50 mm dia outer HDPE Hose fine tee, flow tee of ISI make with connecting sepcieals for suction including cost of all materials ,labour, lead, lifts, etc, complete.

Supplying and fixing of 25 mm dia outer HDPE Hose fine tee, flow tee of ISI make with all connecting sepcieals for air pipe including cost of all materials, labour, lead, lifts, etc, complete.

Supplying and fixing and erection of 50 mm dia GI pipe 'B' Class in suction and delivery pipe from the Bore including cost of pipe coupling,bend, labour for cutting , threading & fixing wherever necessary.

Provision of conducting Geological survey for bore well by the Government agencies. including transport,labour etc complete

S&F of 3 phase 5 HP Submersiable pump with accessories of approved make of Texmo or ELG Iincluding cost of all materials,labour transport,lead,lift etc with mounting platform & foot valve arrangement and 3 phase 15 amphs L& T starter arragements etc complete

painting and writing the name of substation in the wing wall both in English & Tamil with artist painter including cost of all material, labour for fixing, transportion, lead, lift, etc., complete.

Supplying and fixing of 15mm high quality brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. S Type chair with nylon seated

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., completeSteel side rack open type

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete.Steel half bench

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete steel stool

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete.SC table

Supply of furnitures any other ISI mark including cost of all materials, labour, lead and lift etc., complete PVC armed Chair of reputed make

SGST & CGST (If applicable quote the value, if not enter '0')

IGST (If applicable quote the value, if not enter '0')

K Rajkumar (BID ID -1474930)