Special repair to Offrs Accn Bldg No. P-119 to P-122 under GE (West) Jalandhar Cantt

Amount

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.

M & L for roughning old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc. complete all as specified

M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces over bitumen primer @0.30kg/sqm complete all as specified

M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid on primed surface by forced application complete all as specified.

M&L for 40mm thick brick tiles laid in cement mortar 1:3, 15mm thick and joints grouted flush with cement mortar 1:3 mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified.

All as per item No. 7 above but except tiles.

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

All as per item No. 10 above but area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.

S/F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, and fixing in opening as per manufacturer's instructions.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with particle core board,with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm thick moulded prelam PVC sheet on back face, and fixing in frame at site as per specification & manufacturer's instructions.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate of size 105x60mm etc, complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate of size 125x60 mm complete all as specified and directed.

M&L for PCC type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similar articles complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one side & decorative face veneer with lipping/frame to match one side complete all as specified and directed

S&F glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, wire cloth, grills & painting shall be measured & paid for separately.

All as per srl item No. 19 here in before but of gauged shutter. Note for item No. 19 & 20 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

S&F mild steel work as in grills, gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

M&L for 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F MS 40mm dia cup board knobs fixed with nut , screw and washer of brass polished complete all as specified by Engineer in charge.

M&L for hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F continuous piano hinges mild steel bright finish of flap width 40mm complete all as specified and directed.

S&F magic eye of brass body standard size, fixed to door shutter with screws complete all as specified.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified.

M&L for preparation of old wood and wood based surfaces of any description over 10CM width or girth and applying two coat of synthetic enamel paint including removal of existing finish complete all as specified.

M&L for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1:18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

Supply & fix extruded aluminium alloy handles, cast type, anodised, oval type, 150 mm size, all as specified and directed.

Supply & fix 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminum alloy anodised sliding door bolt 300mm long with hasp, staple (bolt type and fixing of clips of sheet, fixing bolts etc.) complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Demolition of reinforced cement Concrete above ground level n. exc 15 cm thick complete all as specified and directed.

M&L for Cement Concrete nominal mix type A1-1:1.5:3 (20mm graded aggregate) as in slab supported on walls, beam and columns in floor, roof etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exc 200mm thick (Horzontal or sloping) flat rough finished surface of concrete complete all as specified and directed.

M & L for PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed.

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring complete all as specified and directed.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed bed in CM 1:3 admixed with integrated water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor complete all as specified and directed.

S&F 32mm dia GI pipe bevelled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for 100mm thick cement concrete type D2, 1:4:8 using 40mm graded aggregate as in subbase complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material & labour for 20-25mm thick machine cut kota stone slab laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbing and polishing over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed. Note - Kota stone for step shall be in single piece.

All as per item No. 54 above but in skirting over and incl 15mm thick screed in cm 1:4 and taking down cement mortar. Complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in benching or similar artciles Complete all as specified.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove incl brushing neat cement slurry with 3.00kg of cement per sqm Complete all as specified.

S&F granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and cut oval type in one end for WHB including 15mm thick screed bed CM 1:4 as per directed by EIC.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), remoing serviceable tiles to store and rubbish off the premises Complete all as specified.

Material & labour for 60mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment over sand cushioning complete all as specified and directed. The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified.

M&L for PCC 1:3:6 Type B1 (using 20 mm graded aggregate as ) as in roof curves, mud stops rounded or chamfered on edge complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 sqm , in floors and scantling etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed cement mortar 1:4 complete all as specified and as directed

All as per ser item No 62 above but as in vertical surface over and including cement mortar rendering screeding 1:4, 10 mm thick complete all as specified and directed.

M&L for non skid ceramic coloured tiles of size not less than 400 x 400mm & 7 to 8 mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including screed bed or beading layer of morter 15mm thick in cement mortar (1:6) for laying in floor finishes , complete all as specified and directed.

All as per ser item No 64 above but as in vertical surface over and including cement mortar rendering screeding 1:4, 10 mm thick complete all as specified and directed.

M&L for coloured glazed digital ceramic tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 10mm thick CM 1:4 complete all as specified

Taking up cast iron 80 mm bore (including all fittings) pipe, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified & directed.

Taking up cast iron 100 mm bore (including all fittings) complete all as specified & directed, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified & directed.

Material and labour for 100mm bore sand cast iron soil, waste and vent pipe, any length with or without ears ,with cement joints fixed to walls or in floors complete all as specified & directed.

Material and labour for 75 mm bore sand cast iron soil, waste and vent pipe , any length with or without ears ,with cement joints fixed to walls or in floors complete all as specified & directed.

Material & labour for cast iron bends (any radius), diminishing pieces or tapers of size 75mm complete all as specified and directed.

Material & labour for cast iron bends (any radius), diminishing pieces or tapers of size 100mm complete all as specified and directed.

S&F CI traps 'P' or 'S' 100mm bore complete all as specified and directed.

S&F CI vent cowl 100mm bore complete all as specified and directed.

M&L for 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Material and labour for branch pieces 100 mm,single( equal or unequal) ordinary or inverted (spigot or socket type) or parallel branches including inspection eye (Tikki) complete all as specified and directed.

All as per item no. 77 above but double100 mm complete all as specified and directed.

Material and labour for branch pieces 75 mm ,single( equal or unequal) ordinary or inverted (spigot or socket type ) or parallel branches including inspection eye (Tikki) complete all as specified and directed.

All as per item No. 79 above but double 75 mm complete all as specified and directed.

Material & labour for salt-glazed stoneware gully traps, square or round mouthed, type 'P' of size 150 mm x 150 mm complete all as specified and directed.

Material and labour for 100 mm CI socket (double ) collers complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

Taking down or up steel tubing and connections inculding cleaning for refixing or removal to store 15mm bore complete all as specified and directed.

Taking down or up steel tubing and connection inculding cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layid in floors all as specified and directed

S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or laid in floors all as specified and directed

S & F 1000 litre rotational moulded polyethylene water storage tank double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified fixed in repairs.

S&F ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed.

S&F in repair stop valve cast copper alloy fancy type CP, screwed down high pressure with capstan head, screwed both ends for iron pipes or for union & fixed in 20 mm bore pipe complete all as specified and directed.

S&F stop cock fancy type chromium plated with long shank and cup(Concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed 15mm bore fixed in repair complete all as specified and directed.

S&F stop cock/angle cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore.

S&F brass CP wall mixer 2 in one with telephonic shower for mixing hot & cold water screwed down for iron pipe and fixed for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs pillar mixer, cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore complete all as specified and directed.

S&F PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets 10 ltr capacity in repair complete all as specified and directed.

S&F plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aluminized hinging device fixed in repair complete all as specified and directed.

S & F in repairs Viterous china wash down water closet pan(pedestal pattern) white (excluding fixing bolts, flushing cistern and floor pipe) complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back size 550x400mm excluding taps, waste chain and plug and proclain stopper but including bracket complete all as specified and directed.

Supply & fix CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed

S&F CP/Brass peg set of six fancy type complete all as specified and directed

S&F 32mm dia waste pipe for WHB complete all as specified and directed

S & F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.

S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/woodencabinet and repairing the disturbed surfaces to match with existing complete all as specified and directed

Supply & fixing in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plugs, washer and wastes pipe , cast iron cantilever brackets and connecting union over all size 915 x 460 mm with bowl size 410 mmx 330 mmx 160 mm complete all as specified and directed

S&F in repairs chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed

S & F in repair pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and directed

S&F bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified and directed

All as per item No 111 above but fancy type and chromium plated long body complete all as specified and directed

Material & labour for 25mm dia mild steel pipe curtain rod, powder coated fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), curtain rings (minimum 5 Nos rings per running mtr of curtain rod) shade as approve complete all as specified and directed.

S&F 4mm thick superior quality shelves (corner), made of transparent acrylic sheet, set of three, size 30x30cm, 25x25cm, 20x20cm complete all as specified and as directed.

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied.

S&F stainless steel soap dish complete all as specified

Taking down cement plaster on wall built in cement or cement lime mortar incl raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement. (Ceiling) complete all as specified and directed

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for preparing new plastered surfaces of wall and applying 2 coats of cement based paint over a coat of cement primer complete all as specified and directed

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash complete all as specified and directed

M&L for preparation of new surface of wall with Birla putty filling on plastering surface and applying two coats of oil emulsion distemper white or tinted on walls complete all as specified and directed

M&L for complete removal of existing treatment on wall and applying two coats of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on wall and applying two coats of cement base paint on one coat of putty filling over a coat of primer on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces of ceiling including complete removal scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying three coats of white (lime) wash complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down U/S submain wiring of two single core PVC cable, PVC insulated 4/6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc as directed by Engr-in-charge.

Taking down main switch/DB of any size and making good distrub surface of wall/floor complete all as specified and directed

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 130 here-in-before but 3 pin socket outlet, 5 Amp on same board complete all as specified and as directed

All as per srl item No 130 here-in-before but for 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed

All as per srl item No 130 here-in-before but two way point controlled by one way switch complete all as specified and as directed

All as per item No. 130 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix switch piano flush type, 15 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix socket out let multi purpose 5 Amps 5 pin single phase flush type complete all as specified.

Supply and fix switch socket combination multi purpose flush type, 6 pin 15 Amp 230/250 volts, AC with ISI marked multi pin complete all as specified.

Supply and fix lamp holder PVC/Polycarbonate with back plate suitable for batten fittings including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

S & F ceilling rose surface type bakelite 65x50mm three terminal all as specified and directed

S & F stepped type electronic fan regulator flush type five steps all as specified and directed

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 6.00 Sqmm cable and one run of 6.00 earth wire & 25 mm PVC conduit shall be measured as one unit length.

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 4.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 4.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 4.00 Sqmm cable and one run of 4.00 earth wire & 20 mm PVC conduit shall be measured as one unit length.

Supply and fix DB SPN 8 way double door for MCB 240 Volts with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix DB TPN, double door 4 way, 440 Volts with sheet metal enclosure 200 Amps rated bus bar complete all as specified and directed.

Supply & fix MCB, 32 to 63 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix MCB, 6-32 amps SP 240 volts, B series complete all as specified and directed.

Supply & fix MCCB TPN, 100 Amps 415 volts complete all as specified and directed.

Supply & fix LED light fitting 22W (double side) including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 20 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. Make :Havells cat part No. LUMILINEPLUSBS22WLED865SPCSS or equivalent of group 1 as mentioned in appendix 'B'

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply & fixing in replacement LED street light fitting 20W including LED lamp pressure die cast aluminium IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting including all fittings as specified and directed by Engr-in-Charge Make: Havells Cat Part No LHETBXU7PA6W048 or equivalent of group 1 as in Appx 'B'

Supply and lay GI tubing light , grade 40mm bore with all necessary fittings laid in trenches under road crossing in floors complete all as specified and directed.

S&F bell, AC 230 volts single phase complete all as specified and directed.

Supply and fix exhaust Fan 300mm sweep, 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed.

Supply and Fix in replacement decorative wall mounting type with colour ABS housing with polycarbonate range and glass shade with LED lamp 6500K (white colour) complete city-1 complete all as specified and directed.

M/s Nirmal Singh and Co.

B.P CONSTRUCTION CO

HYLAND CONSTRUCTION COMPANY

AAY KAY ENGINEERS

M/S Vinod Kumar

G S TRADERS

M/S RAJESH CONSTRUCTION COMPANY

SINGH AND SONS