Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹41.1 L+₹3.0 L (7.79%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹42.8 L+₹4.6 L (12.1%)Rejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹43.0 L+₹4.9 L (12.7%)Rejected-Finance HIG 40 TYPE B DEV PRAYAGAM ADA COLONY JHALWA PRAYAGRAJ U P 211015 | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211015 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹44.3 L+₹6.1 L (16.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹41.2 L
EMD Value
₹82,420
Closing Date
4 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
IMPROVEMENT TO AIRMEN LIVING ACCN AND CERTAIN SANCTION WORKS UNDER GE (AF) BAMRAULI
2023_MES_608873_1
8826/E8
Open Tender
Civil Works
Works
180 days
GE (AF) Bamrauli
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹82,420
Yes
31 Jan 2024
13 Jul 2023
7 Aug 2023
13 Jul 2023
4 Aug 2023
26 Jul 2023
Amount
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each
Refixing of shutter in the same opening of any description n exceeding 1 sqm each.
Refixing of shutter in the same opening of any description exceeding 2 sqm Each
S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
M & L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
M&L for 1st class hard wood plain,soild straight chowkhats and frames wrought, framed rebated on the solid ,rounded or chamfered put toghter withglue pinned at joints ,supllied and fixed complete all as specified and directed.
S&F Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.
S&F 1st class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.
S&F Second class hardwood Flush shutters 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.
S & F in repair steel window/steel ventilator factory made, out of MS hollow section 97mmx39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of z section using flush butt welding and tennon riveting all as per IS 1038/83,dobby hinges shall be provided to both shutters, locking arrangements as per sample approval by GE,provided with knob,10mm MS square bars in grill,Zsection handle 100mm size and 150mm long hook & eye welded to frame and shutter four Nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats synthetic enamel paint over a coat of zinc chrome red oxide primer. complete all as specified and directed.Note: wire mesh and sheet glass shall be measured & paid separtely under respective items..
S&F MS 1.25 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required. complete all as specified and directed.
M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. complete all as spesified and directed .
M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for PCC 1:2:4 type B--0 using 12.5 mm granted stone aggregate as hold fast/filling coping in pressed steel frame complete all as specified and directed
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed .
S&F 300 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .
S&F 250 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .
S&Fin repairs 250 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed .
S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed .
S & F 150mm long Aluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed .
S & F in repairs150mm long Aluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed .
S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.complete all as spesified and directed .
S & F 100mm long Aluminium anodised barrel tower bolts of extruded section.complete all as spesified and directed .
S & F aluminium anodised hasp & staple for 75 mm including bolt to hinge plate and fixed with screws complete all as specified .
S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed .
S&F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as spesified and directed .
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
S & F 4mm th Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed.
S & F in repair 4mm th Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane including hacking out complete all as specified and directed.
S & F 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed.
Supply and fixing of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed.
S&F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive and parliyament hinge as requred as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
S&F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.
S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain complete all as specified and directed.
S&F Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed.
S & F Stainless Steel bright color decorative corner/end cap for Curtain rod complete all as secified and directed.
S&F stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw all as specified and directed.
S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed .
S&F fancy type glass corner shelf ( 2 in each pair with CP brackets etc complete all as specifed and directed.
S&F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.
S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.
S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including pvc waste pipe, CP waste coupling,bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.
Supply and fixing(in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed . including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device
S&F in repair chromium plated fancy type Hand Jet spray (Health faucet).
S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.
S & F in repair Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.
S&F in repairs concealed stop cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.
S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.
S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.
S & F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position exc 250 ltr n.exc 500 ltr cap etc complete all as specified and directed.
S&F rotational moulded polythene water storage tank of capacity 500 ltrs to upto 10mtr height (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed and dismantling of existing water tank complete all as specified and as directed.
S&F rotational moulded polythene water storage tank of capacity 1000 ltrs to upto 10mtr height (Cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc. of 20 mm dia directed and dismantling of existing water tank complete all as specified and as directed.
S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and as directed.
S& F Stop valves/Gate valves 25 mm dia cast copper alloy,screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed.complete all as specified and directed.
Taking up or down old steel tubing 15 mm dia complete all as specified and directed.
Taking up or down old steel tubing 20 mm dia complete all as specified and directed.
Refixing old 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.
Refixing old 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.
S&F 15 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.
S&F 20 mm GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking up or down old steel tube complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC SWR (110) bends any radius comlete all as specified and directed.
S&F 75 mm PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) .complete all as specified and directed.
S& 110 mm PVC (SWR) vent cowl. Complete all as specified and directed.
S&F 100 mm cast iron sanitary connection socket to fit wc out let complete all as specified and directed.
Dismantling of brick tiles laid bedded and pointed in any morter or brick tiles on roof , floors, channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for.
Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L For cutting out cracks to v-section in existing roofs or terraciv cleaning grouting with cement and sand slurry 1:3. complete all as specified and directed.
M&L For cutting grooves in brick wall 75mm wide and 65mm deep & shaping horizontal face of groove with cement . complete all as specified and directed.
M&L PCC 1:3:6 type B-1(using 20mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc complete all as specified and directed.
M&L for rendering or bedding layer 15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with WPC 2% wt of cement inclduing finishing surfaces even and fair without using extra cement complete all as specified and directed.(Note: WPC will be measured and paid separately).
M&L for Cleaning the roof surfcae from dust /dirt and applying a coat of hot blown bitumen of grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed.
M&L for APP based polymeric water proofing membrane minimum weight 3.6 Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.complete all as specified and directed.
M&L for rendering or bedding layer 15mm thick in cement mortar (1:3) cover concrete surfaces of roof, mixed with linesed oil @ 3% wt of cement inclduing finishing surfaces even and fair without using extra cement inclusive linesed oil complete all as specified and directed.
M&L for Cement concret tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished complete all as specified and directed.
M & L for machine cut Kota stone slab as in flooring 20 to 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror polish granite finish including backing coat 10 mm thick in cm1:3 complete all as specified and directed.
M&L for cutting, Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish completecomplete ®all as specified and as directed by the Engineer-in-Charge
Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 20mm thick granite work table rubbed and polished for wall lining /kitchen platform over 12mm thick cement mortar 1:3 thick and moulding and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for 20mm thick granite Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including MOULDING AND pointing in white ement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
Demolition of PCC in ground floor n.exc15cm thickness below or above ground level complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick joint free (square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 450x 350x7 mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality).complete all as specified and directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) for plinth protrction etc complete all as specified.
Supply only liquid integral water proofing compund. Make Dr Fixit/ Pidipfoor/ LW+.
Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.
M&L for Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, with mixing WPC @ 3% by wt of cement surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over a coat of putty of 1.55mm thickness complete all as specified and directed by Engg-in-Charge.
M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over one coat of primer and 1.5mm thick wall care putty complete all as specified and directed by Engg-in-Charge.
M&L for complete removal of existing treatment on Walls surface and applying two coat of white wash complete all as specified and directed.
M&L for preparing new plaster surfaces of Walls and applying two coats of white wash over coat of primer complete all as specified and directed.
M & L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.
M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of wallsand 1.5mm thick wall care putty complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint by complete all as specified and directed.
M&L for taking down wooden roof truses,coupled rafters or truses beams of span upto 8mtrscomplete all as specified and directed.
M&L for wooden housing and fixing trusses etcafter minor repairs including tightening up wedges ,cotters bolts etccomplete all as specified and directed.
M&L for timber .clean sawn in scantling trusses beamns rafters etc suitable for strutting ,shoring or other purposes
M&L for Providing and fixing Gyspsum board 12mm thick in ceiling fixed with screw as per manufacaturer instruction
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
S & F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etcfixed with coach screws complete all as specified and directed.
M&L for fixed in repairs plain fillet of exc 3 and n .exc 6 sq cm square,rectangular or triangular in section ,clean sawn,secured with screws complete all as specified and directed.
All as per item No. 123 above but bull nosed,splayed,chamfered or rounded on one edge of face complete all as specified and directed.
M&L for cement concrete PCC (1:4:8) Type-D2, 40mm graded aggregate in foundation filling and mass concrete
M&L for Machine pressed precast concrete interlocking Colour paver block glazed any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade etc complete etc all as specified and directed.
M&L for 30mm thick sand cushion below inter locking paving tiles including spreading, levelling and compaction complete all as specified.
M&L for preparation and writing letters or figures (block, Roman, Italic or Indian) n.exc 30 CM heinght on plaster/concrete wall/path over coat of ACE as matching with existing pattern complete all as specified & directed
Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit medium grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-
One light/fan/bellpoint controlled by one switch single pole one way
All as per item No 130 here-in-before but one 3 pin 6 amp switch socket out let independent .
All as per item No -130 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete .
All as per item No 130 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.
Supply and fix switch modular flush 6A single pole one way ISI marked
Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined all as specified and directed.
Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked
Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.
Supply and fix ceiling rose surface bakelite 60x25mm three terminal
Supply and fix in replacement electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type
Supply and fix in replacement white cover plate with frame two module for modular switches and sockets complete all as specified and directed.
Supply and fix in replacement white cover plate with frame three module for modular switches and sockets complete all as specified and directed.
Supply and fix in replacement white cover plate with frame four module for modular switches and sockets complete all as specified and directed.
Supply and fix in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed.
Supply and fix metal flush box 1/2 modul 1.6 mm for mounting modular switches and sockets complete all as specified and directed.
Supply and fix metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.
Supply and fix metal flush box four module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.
Supply and fix metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.
S&F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, system lumen efficiency >90 lumen/watt, 6500k and including connecting from ceiling rose to fitting complete all as specified and directed.
Supply and fix LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed complete all as specified and directed.
S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed.
supply and fix connecting and testing LED street light 35 watt 6000k/3000k new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminium housing with high efficient led as lighting source and PC cover having toP opening seperate driver compartment with IP66 protection and impact resistance of IK07 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting Note - fitting shall be make Crompton/Philips/Bajaj/Havells
S&F Fresh air fan, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete.
S & F exhaust fan 300/230 mm (Metal body) sweep complete with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete all as specified and directed.
Supply & fix MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.
Supply and fix MCB, single pole and neutral, 230 volts, 32 to 40 Amp rating, 'C' series fixed in DBs catered here-in-before. Make Legrand/Hager/siemense
Supply and fix MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer in charge
S & F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp.
Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, with remote , BEE 5 star rating for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length incl taking down old & deposited to MES store yard complete all as spd & directed. Note : Cost of remote cell included in this item
Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.
Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 100 Amp as incomer and 6 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.
Supply and fix in repair MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.
M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealconduit and making good to match with existing finish.
M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealconduit and making good to match with existing finish.
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe suitable size with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltrs having element 1.5/2 KW BEE star rating incl taking down old and deposted to MES store yard
Supply, laying, jointing & testing of underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 Volt grade cross sectional area 25 Sqmm 4 core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs. Note :- (i) Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.
Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable all as specified and directed.
Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.
Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.
Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.
Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected
Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.
Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed
Supply, install, testing and commissioning in replacemnt of outdoor type cubical panel board of suitable size outer shell made out of 3.5 mm thick MS sheet and inner shell made out of 1.6 mm thick MS sheet and MS angle iron section mounted on PCC 1:2:4 type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable door system (door hinged with body at 4 places with body and hinges should be welded with body and door) lockable/ openable by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely dust/vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction complete all as specified and directed by Engineer-in-charge. confirming to IS:8623/93 and comprising of the following :- Bus Bar System - Copper Bus bar duly colour coded with PVC sleeves 4 pole of capacity 1.5 times of rated capacity of incoming and outgoing power switch gear respectively. Incoming - MCCB 250 Amp, 4 pole, 25 KA, ICS = 100% ICU, with adjustable thermal magnetic setting alongwith Spreader terminals – 01 No. Outgoing - (a) MCCB 63 Amp, 4 pole, 16 KA, ICS = 100% ICU, with adjustable thermal magnetic setting alongwith Spreader terminals – 06 Nos. (b) DOL Starter Feeders for 10 HP Motor 3Ø, 415V, 50 Hz -06 Nos comprising following items : (i) Contactor 25 Amp , 3 pole, 415 Volts ,-06 Nos (ii) Elecronic Motor Protection Relay with inbuilt Earth fault Protection(8-22 Amp Range) -06 Nos (ii) Multifunction Meter in cluding CT Coil - 06 Nos (iii) Rotary switch - 06 Nos (iv) Push button - 12 Nos (v) Indicator Lamp -09
Supply, install, testing and commissioning in replacemnt of outdoor type cubical panel board of suitable size outer shell made out of 3.5 mm thick MS sheet and inner shell made out of 1.6 mm thick MS sheet and MS angle iron section mounted on PCC 1:2:4 type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable door system (door hinged with body at 4 places with body and hinges should be welded with body and door) lockable/ openable by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely dust/vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction complete all as specified and directed by Engineer-in-charge. confirming to IS:8623/93 and comprising of the following :- Bus Bar System - Copper Bus bar duly colour coded with PVC sleeves 4 pole of capacity 1.5 times of rated capacity of incoming and outgoing power switch gear respectively. Incoming - MCCB 100 Amp, 4 pole, 25 KA, ICS = 100% ICU, with adjustable thermal magnetic setting alongwith Spreader terminals – 01 No. Outgoing - (a) MCCB 40 Amp, 4 pole, 16 KA, ICS = 100% ICU, thermal magnetic alongwith Spreader terminals – 03 Nos. (b) DOL Starter Feeders for 5 HP Motor 3Ø, 415V, 50 Hz -03 Nos comprising following items : (i) Contactor 25 Amp , 3 pole, 415 Volts ,-03 Nos (ii) Elecronic Motor Protection Relay with inbuilt Earth fault Protection(8-22 Amp Range) -03 Nos (iii) Multifunction Meter in cluding CT Coil - 03Nos (iv) Rotary switch - 03 Nos (v) Push button - 06 Nos (vi) Indicator Lamp - 06 Nos
Supply, install, testing and commissioning in replacemnt of outdoor type cubical panel board of suitable size outer shell made out of 3.5 mm thick MS sheet and inner shell made out of 1.6 mm thick MS sheet and MS angle iron section mounted on PCC 1:2:4 type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable door system (door hinged with body at 4 places with body and hinges should be welded with body and door) lockable/ openable by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely dust/vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction complete all as specified and directed by Engineer-in-charge. confirming to IS:8623/93 and comprising of the following :- Bus Bar System - Copper Bus bar duly colour coded with PVC sleeves 4 pole of capacity 1.5 times of rated capacity of incoming and outgoing power switch gear respectively. Incoming - MCCB 40 Amp, 4 pole, 25 KA, ICS = 100% ICU, thermal magnetic alongwith Spreader terminals – 01 No. Outgoing - (a) DOL Starter Feeders for 2 HP Motor 3Ø, 415V, 50 Hz -03 Nos comprising following items : (i) Contactor 08 Amp , 3 pole, 415 Volts ,-01 Nos (ii) Thermal over load relay 8 Amp -01 Nos (iii) Single Phase Meter - 01 Nos (iii) Multifunction Meter in cluding CT Coil - 01 Nos (iv) Rotary switch - 01 Nos (v) Push button - 01 Nos (vi) Indicator Lamp - 04 Nos
Supply, installation Non clog vertical submersible pumps of capcity 3 HP designed for minimum 25 Meter head and 300 LPM flow with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including guide rail and lifting chain, cables, testing complete etc complete all as directed.
Supply, installation Non clog vertical submersible pumps of capcity 5 HP designed for minimum 25 Meter head and 500 LPM flow with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including guide rail and lifting chain, cables, testing complete etc complete all as directed.
Supply, installation Non clog vertical submersible pumps of capcity 15 HP designed for minimum 40 Meter head and 1000 LPM flow with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including guide rail and lifting chain, cables, testing complete etc complete all as directed.
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Supply , laying, jointing and testing in replacement of underground LT cable XLPE insulated ,screened PVC bedded , galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 Core laid in trenches/ducts/along poles/ through pipe under road etc all as specified and directed by Engr-in-Charge
Taking out aerator motor pumping set from existing foundation after disconnecting of elect connection & necessary pipe line by opening nut bolts etc and dismantling the aerator motor pumping set for carrying out the repairs, reassembling the same including replacement of wornout nuts, bolts and washers including derusting, descaling, servicing, oiling, greasing ,reinstalling, testing and making good all Sewage line and electric connections to ensure proper functioning entire unit and commissioning complete all as directed by Engr-in-charge :- Note :- The unit rate includes the cost of nuts, bolts, washers and all material required for overhauling , derusting, descaling etc & no extra payment will be made. (ii)The unit rate includes the cost of overhauling of helical gear box of aerator motor pumping set and replacement of parts pertain to it.(iii) (ii)The unit rate includes the cost of Painting of aerator motor pumping set with Synthetic enamel Paint
M&L for rewinding to aerator motor of capacity 10 HP of any make with supper enamelled copper winding wire of existing size and quantity including insulating materials ie varnish , sleeves etcincluding dismantling for repair and commissioning after repair complete all as directed by Engr-in-Charge.
Supply Gear oil suitable for aerator motor&pumping set. Make Veedol/Power gear/MAK
S&F in replacement of PVC flexible housing section pipe 100 mm dia 3mm thick with clips for clamping complete all as specified and directed.
S&F in replacement of PVC flexible housing section pipe 50mm dia 3mm thick with clips for clamping complete all as specified and directed.
M&L for earthing complete with Galvanised earth plate electrode 600x600x6mm thick buried directly in ground (earth) pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connected to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts, check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 75mm x 75mm x 25mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm graded crushed stone aggregate reinforced with 8mm dia TMT BARS @ 75mm O/O both ways with mild steel handle 12mm dia, PGI funnel with wire mesh, 20 MM dia GI pipe light grade for watering all as shown in electrical plate No.3 of MES SSR Part - 1
M&L for 1st class hard wood for 30 mm thick plain, framed paneled shutter (any number of panels) with ponds of timber flat o both side (feathr edged) are of veneeredparticle board medium density wood Particle board with commercial fuc6 veener supplied and fitted to chawkhats complete all as specified and directed.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
Abhinav Builders
M/S R S Traders
R K CONSTRUCTION COMPANY
Toshi Enterprises
M/S SWASTIK BUILDERS
Krishna Enterprises
Mohit Enterprises
chauhan construction
Bharat Trading Company
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .