NIT NO. 276/Durg(Kawardha)/2026

N.I.T. Schedule For Boundarywall District Jail Campus Kawardha, Dist- Kabirdham (C.G.) (Total Length -965.70 Mtr)

P.A.C. Rs. 77.17 Lacs

Portalid Tender no Line Item No Page no Srno ItemId ConfigId Sub Division Code Discription Quantity Rate Unit Amount AmountIn Words

pwd.cgeprocurement.gov.in 1 1.4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 2897.1000000000004 3.7 Sqm

pwd.cgeprocurement.gov.in 2 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

pwd.cgeprocurement.gov.in 1.1.1 In all types of soils. 1328.2411153846156 185 Cum

pwd.cgeprocurement.gov.in 3 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

pwd.cgeprocurement.gov.in 3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 119.45180769230771 2970 Cum 2 1

pwd.cgeprocurement.gov.in 4 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

pwd.cgeprocurement.gov.in 3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 348.99684615384615 4163 Cum

pwd.cgeprocurement.gov.in 5 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 109.33638461538462 97.5 cum

pwd.cgeprocurement.gov.in 6 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 1095.9815000000003 371 Cum

pwd.cgeprocurement.gov.in 7 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

pwd.cgeprocurement.gov.in 3.12.2 Thermo-Mechanically treated bars FE 500D 80 kg/cum 31409.716153846155 54.5 Kg

pwd.cgeprocurement.gov.in 8 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

pwd.cgeprocurement.gov.in 2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 1100.9323076923079 139 Sqm 6

pwd.cgeprocurement.gov.in 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 1489.6923076923076 297 Sqm

pwd.cgeprocurement.gov.in 2.1.8 Beams, lintels, cantilevers & walls 482.85 202 Sqm

pwd.cgeprocurement.gov.in 9 7.5+7.6 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

pwd.cgeprocurement.gov.in 7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand)

pwd.cgeprocurement.gov.in 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 410.0510769230769 3384 Cum

pwd.cgeprocurement.gov.in 10 11.2 Providing and making 12mm thick cement plaster of mix:

pwd.cgeprocurement.gov.in 11.2.3 In Cement Mortar 1:5 (1 cement : 5 fine sand) 2703.96 96.5 Sqm

pwd.cgeprocurement.gov.in 11 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

pwd.cgeprocurement.gov.in 11.3.3 In Cement Mortar 1:5 (1 cement : 5 fine sand) 2703.96 113 Sqm

pwd.cgeprocurement.gov.in 12 9.6 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.

pwd.cgeprocurement.gov.in 9.6.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 406.25 68 kg

pwd.cgeprocurement.gov.in 13 9.45 Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block. 4402.785615384614 69.5 Kg

pwd.cgeprocurement.gov.in 14 14.71 Providing and Applying of Satin/ Matt Finish Enamel Paint minimum 02 coats applied in all surfaces applying @ 0.75 Litr/10 sqm upto required finish as per relevant I.S.Code 2932:2013 of (Product such as Asian Satin Enamel, Dulux Promise Premum Enamel, Nerolac Synthetic Enamel, Opus Prime Enamle) inclusive of providing abro tape on edges and article and ceaning of door, windows, floor and surfaces as required with all tools tackles and labour etc. complete for the work. For Angle Iron 441.93653846153836 133 Sqm

pwd.cgeprocurement.gov.in 15 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 (product such as Birla white primacoat/activcoat, Asian Trucare, Dulux interior cement primer, Opus Calista / 110) with all tool tackles and labour etc. complete for the work. 2414.25 29 Sqm

pwd.cgeprocurement.gov.in 16 14.58 Providing and applying water proofing cement paint mimimum 2 coats applied @ 3.84 kg/10 sqm up to required finish as per relevant I.S. code 5410:2013 of required shade (product such as Snowcem plus, J.K. Shri Cement paints century Cement Paints, Apex paints,Maxcoat cement paint) with all tool tackles and labour etc. complete for the work. PRIMER 4828.5 53 Sqm

pwd.cgeprocurement.gov.in 17 9.4 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 965.7 164 Metre